Tag Archives: air compressor air compressor

China wholesaler 380V 50Hz 3phase 7.5kw 10HP Mini Screw Air Compressor in Stock Energy Saving Type VSD Screw Air Compressor 75 Kw VSD Air Compressor Compressor Screw air compressor for sale

Product Description

VSD screw air compressor
♦ Intelligent Touch-Screen Design
♦ Direct Driver
♦ Oil Gas Separator
♦ Oil Filter
♦ Air Filter
♦ Stainless Steel
♦ Piping Design

Product features
One shaft type structure
1. Permanent magnet motor and airend use the embedded integrated Shaft connecting structure, more compact, 100% transmission Efficiency.
2. No motor bearings, eliminating the motor bearing fault points. Different speeds, permanent magnet

motor with high efficiency, Remarkable energy-saving effect
1. At rated speed point, permanent magnet motor efficiency is higher Than ordinary motors.
2. Under low motor speed, permanent magnet motor can still keep high Motor efficiency. If the gas consumption less, it still keeps extremely High efficiency. Compared with common frequency conversion
3: Motor, the motor efficiency appears obvious gap and the air Compressor has effective energy saving
It has the integrated structure, configuration of high efficiency Permanent magnet motor, small size, saving space, easy disassembly. Deloying efficient permanent magnet variable frequency controllor, it Small volume, low noise Can change the speed of the permanent magnet motor according to The exhaust volume, it will achieve lower operation noise than ordinary Ones.
4. Permanent magnet motor has high performance NdFeB permanent Magnet, 120 º Cwithout loss of excitation, and service life of over 15 Years.
5. Stator coil adopts special inverter corona resistant enamelled wire. Insulation performance and longer service life.
6. Realizing soft start, the motor current will not exceed the full load Current during operation, and greatly reduce the impact on network Equipment, no damage to electrical equipment.OSG-EZV series permanent magnet compressor Stable operation.

Energy-saving advantages:
a. Permanent magnet motor has high performance NdFeB permanent Magnet, 120 º Cwithout loss of excitation, and service life of over 15 Years.
b. Stator coil adopts special inverter corona resistant enamelled wire. Insulation performance and longer service life.
c. Realizing soft start, the motor current will not exceed the full load Current during operation, and greatly reduce the impact on network Equipment, no damage to electrical equipment.OSG-EZV series permanent magnet compressor
Energy-saving advantages:

Condition energy saving
1: The permanent magnet motor remains high efficiency at low speeds, ensuring Obvious energy-saving advantages in small air volume.
2: Frequency range from 0%-100% (common conversion from 60%-100%)
3: Compared with the fixed speed compressor, energy saving 22%-40%
4: Compared with the common inverter compressor, energy saving 5%-15%
5: System volume fluctuations larger, then energy-saving effect more obviously.
6: Energy saving system of unloading (inverter):
According to the stationary air compressors in gas consumption fluctuation, it has the unloading time, then the air compressor idling but also need 45% of the Electricity, but the permanent-magnet frequency air compressor will control for Inverter, no unloading and no waste. If the air compressor units become larger,
Energy saves more. Save the wasted electric energy by pressure control bandwidth (energy saving):
Fixed compressor must set a minimum control pressure for the 1Barg band (i. E. Air Compressor limits) to avoid the impact on the unit and the power grid. Several Machines must use together with a pressure gradient, more wide pressure, while the OSG permanent-magnet variable-frequency Air compressor series is inverter control,Unlimited stop, no need to set pressure, but a pressure point on the line. The pressureOf each 0.14Barg bandwidth, the system can save energy 1%.

Energy saving startup (inverter):
Air compressor’ s starting current is 3-6 times of the rated current, the frequently Start will waste a lot of energy, and frequency conversion type has no frequent Starting and stopping, but soft start. The maximum current does not exceed the Rated working current, no energy waste. At the same time also greatly reduce the Impact on network equipment, and no damage to electrical equipment OSG company has obtained a compressor production license(certificate NO: XK06-571-0571), has obtained a quality systemCertificate and general machinery certificate. Product design,Manufacturing processes are strict in accordance with ISO9001: 2008 quality system standards

Model	Pressure (mpa)	Displacement (m³/min)	Power (kw)	Dimension (mm)	Weight (kg)	Outlet Size
VSD-0.7/7.5	0.7	1.20	7.5	840620850	450	G3/4″
VSD-0.8/7.5	0.8	1.10
VSD-1.0/7.5	1.0	0.95
VSD-1.3/7.5	1.3	0.80
VSD-0.7/11	0.7	1.70	11	11507501571	500	G1″
VSD-0.8/11	0.8	1.60
VSD-1.0/11	1.0	1.40
VSD-1.3/11	1.3	1.20
VSD-0.7/15	0.7	2.40	15	11507501571	550	G1″
VSD-0.8/15	0.8	2.20
VSD-1.0/15	1.0	2.00
VSD-1.3/15	1.3	1.70
VSD-0.7/22	0.7	3.80	22	13008501140	620	Rp1 1/4″
VSD-0.8/22	0.8	3.50
VSD-1.0/22	1.0	3.20
VSD-1.3/22	1.3	2.90
VSD-0.7/37	0.7	6.40	37	1500*9501230	1571	Rp1 1/2″
VSD-0.8/37	0.8	6.10
VSD-1.0/37	1.0	5.70
VSD-1.3/37	1.3	5.00
VSD-0.7/45	0.7	8.00	45	1500*9501230	1050	Rp1 1/2″
VSD-0.8/45	0.8	7.70
VSD-1.0/45	1.0	7.00
VSD-1.3/45	1.3	5.80
VSD-0.7/55	0.7	10.50	55	180012501600	1500	Rp2″
VSD-0.8/55	0.8	9.80
VSD-1.0/55	1.0	8.70
VSD-1.3/55	1.3	7.60
VSD-0.7/75	0.7	13.60	75	195012501650	1600	Rp2″
VSD-0.8/75	0.8	13.30
VSD-1.0/75	1.0	11.60
VSD-1.3/75	1.3	9.80
VSD-0.7/90	0.7	16.30	90	257112501650	1800	DN65
VSD-0.8/90	0.8	16.00
VSD-1.0/90	1.0	14.60
VSD-1.3/90	1.3	12.30
VSD-0.7/110	0.7	20.30	110	246015001800	4000	DN65
VSD-0.8/110	0.8	19.40
VSD-1.0/110	1.0	17.30
VSD-1.3/110	1.3	14.60
VSD-0.7/132	0.7	24.00	132	246015001800	4500	DN65
VSD-0.8/132	0.8	23.00
VSD-1.0/132	1.0	20.00
VSD-1.3/132	1.3	18.00
VSD-0.7/160	0.7	28.00	160	258016001980	4800	DN65
VSD-0.8/160	0.8	26.50
VSD-1.0/160	1.0	22.50
VSD-1.3/160	1.3	20.10
VSD-0.7/185	0.7	32.50	185	280017002030	5200	DN65
VSD-0.8/185	0.8	31.00
VSD-1.0/185	1.0	28.00
VSD-1.3/185	1.3	25.10
VSD-0.7/250	0.7	43.50	250	340020002100	6200	DN100
VSD-0.8/250	0.8	42.00
VSD-1.0/250	1.0	38.10
VSD-1.3/250	1.3	34.60

ZheJiang CHINAMFG Gas Compressor Manufacturing Co.,Ltd. founded in 2005, is a leading high technology of machine and equipment manufacturer integrating the design, R&D, production, sales and service for air compressors & Mining Equipment. Adopting advanced technology, design concept and quality control, and we are able to provide customized products to meet customers’ OEM needs.
Our company has more than 520 employees, including 86 senior technicians and professional engineers. Our technical team provides our customers with professional air system solutions. With the total 15000 square meters of the facility, 4 modern advanced production lines are built up to ensure production capacity to meet customer requirements.
Our company has been awarded the honorary title of “ZheJiang high-tech enterprise” and our products enjoy high honors in the industry. Our company has the ISO9001 certification and was awarded the qualification certificate of equipment through military contracts in 2018.
We offer the following products and services:
1. Screw air compressor
    1.1 Oil-free screw air compressor
    1.2 Oil-injected air compressor
2. Reciprocating piston air compressor
    2.1 Piston air compressor
    2.2 Oil-free piston air compressor
    2.3 Piston medium & high-pressure air compressor
3.Portable air compressor & Mining Equipment
    3.1 Diesel or Electric portable screw air compressor
    3.2 Air Pick, Rock Drill, DTH Drilling Rig, Crawler Drilling Rig
4. Air compressor accessories
    4.1 CHINAMFG or Adsorption compressed air drier
    4.2 Compressed air filter or tank
4.3 Lubrication oil
We have a complete system of after-sales service and quality assurance. The company’s material purchase, inspection, manufacturing, installation, and testing are strictly in accordance with the ISO procedures. which will ensure each compressor has reliable quality and has a complete record to trace, if needed.
Q: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.

Q: How can we start order with your factory?
A: First, leave us an inquiry and advise which item you’re interested, and then we will contact you in 24 hours. You’re so kind if provide all detailed information, will better for us to know exactly what you need.

Q: What are your MOQ?
A: Different products have different MOQ, most is 1 set.

Q: What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages.

Q: How about your delivery time?
A: Generally, it will take 90 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q: Do you a trade company or real factory?
A: We are 100% factory; we located in ZheJiang city, China.

After-sales Service:	Online Support
Warranty:	1 Years
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Structure Type:	Closed Type

Samples:	US$ 1500/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \|

air compressor

How does variable speed drive technology improve air compressor efficiency?

Variable Speed Drive (VSD) technology improves air compressor efficiency by allowing the compressor to adjust its motor speed to match the compressed air demand. This technology offers several benefits that contribute to energy savings and enhanced overall system efficiency. Here’s how VSD technology improves air compressor efficiency:

1. Matching Air Demand:

Air compressors equipped with VSD technology can vary the motor speed to precisely match the required compressed air output. Traditional fixed-speed compressors operate at a constant speed regardless of the actual demand, leading to energy wastage during periods of lower air demand. VSD compressors, on the other hand, ramp up or down the motor speed to deliver the necessary amount of compressed air, ensuring optimal energy utilization.

2. Reduced Unloaded Running Time:

Fixed-speed compressors often run unloaded during periods of low demand, where they continue to consume energy without producing compressed air. VSD technology eliminates or significantly reduces this unloaded running time by adjusting the motor speed to closely follow the air demand. As a result, VSD compressors minimize energy wastage during idle periods, leading to improved efficiency.

3. Soft Starting:

Traditional fixed-speed compressors experience high inrush currents during startup, which can strain the electrical system and cause voltage dips. VSD compressors utilize soft starting capabilities, gradually ramping up the motor speed instead of instantly reaching full speed. This soft starting feature reduces mechanical and electrical stress, ensuring a smooth and controlled startup, and minimizing energy spikes.

4. Energy Savings at Partial Load:

In many applications, compressed air demand varies throughout the day or during different production cycles. VSD compressors excel in such scenarios by operating at lower speeds during periods of lower demand. Since power consumption is proportional to motor speed, running the compressor at reduced speeds significantly reduces energy consumption compared to fixed-speed compressors that operate at a constant speed regardless of the demand.

5. Elimination of On/Off Cycling:

Fixed-speed compressors often use on/off cycling to adjust the compressed air output. This cycling can result in frequent starts and stops, which consume more energy and cause mechanical wear. VSD compressors eliminate the need for on/off cycling by continuously adjusting the motor speed to meet the demand. By operating at a consistent speed within the required range, VSD compressors minimize energy losses associated with frequent cycling.

6. Enhanced System Control:

VSD compressors offer advanced control capabilities, allowing for precise monitoring and adjustment of the compressed air system. These systems can integrate with sensors and control algorithms to maintain optimal system pressure, minimize pressure fluctuations, and prevent excessive energy consumption. The ability to fine-tune the compressor’s output based on real-time demand contributes to improved overall system efficiency.

By utilizing variable speed drive technology, air compressors can achieve significant energy savings, reduce operational costs, and enhance their environmental sustainability by minimizing energy wastage and optimizing efficiency.

air compressor

How are air compressors employed in the mining industry?

Air compressors play a crucial role in the mining industry, providing reliable and efficient power for various mining operations. Here are some common applications of air compressors in mining:

1. Exploration and Drilling:

Air compressors are used during exploration and drilling activities in the mining industry. Compressed air is used to power drilling rigs, pneumatic hammers, and other drilling equipment. The high-pressure air generated by the compressor helps in drilling boreholes, extracting core samples, and exploring potential mineral deposits.

2. Ventilation and Air Quality Control:

Air compressors are employed in underground mining to provide ventilation and control air quality. Compressed air is used to operate ventilation fans and air circulation systems, ensuring adequate airflow and removing harmful gases, dust, and fumes from the mining tunnels and work areas.

3. Material Conveyance:

In mining operations, air compressors are used for material conveyance. Pneumatic systems powered by air compressors are utilized to transport materials such as coal, ore, and other minerals. Compressed air is used to operate pneumatic conveyors, pumps, and material handling equipment, allowing for efficient and controlled movement of bulk materials.

4. Dust Suppression:

Air compressors are employed for dust suppression in mining areas. Compressed air is used to spray water or other suppressants to control dust generated during mining activities. This helps in maintaining a safe and healthy work environment, reducing the risks associated with dust inhalation and improving visibility.

5. Instrumentation and Control:

Air compressors are used for instrumentation and control purposes in mining operations. Compressed air is utilized to power pneumatic control systems, control valves, and actuators. These systems regulate the flow of fluids, control equipment movements, and ensure the proper functioning of various mining processes.

6. Explosive Applications:

In mining, air compressors are used for explosive applications. Compressed air is employed to power pneumatic tools used for rock fragmentation, such as rock drills and pneumatic breakers. The controlled power of compressed air enables safe and efficient rock breaking without the need for traditional explosives.

7. Maintenance and Repair:

Air compressors are essential for maintenance and repair activities in the mining industry. Compressed air is used for cleaning machinery, removing debris, and powering pneumatic tools for equipment maintenance and repair tasks. The versatility and portability of air compressors make them valuable assets in maintaining mining equipment.

It is important to note that different mining operations may have specific requirements and considerations when selecting and using air compressors. The size, capacity, and features of air compressors can vary based on the specific mining application and environmental conditions.

By utilizing air compressors effectively, the mining industry can benefit from increased productivity, improved safety, and efficient operation of various mining processes.

air compressor

What are the safety considerations when operating an air compressor?

Operating an air compressor requires careful attention to safety to prevent accidents, injuries, and equipment damage. Here are some important safety considerations to keep in mind:

1. Read the Manual: Before operating an air compressor, thoroughly read and understand the manufacturer’s instruction manual. Familiarize yourself with the specific safety guidelines, recommended operating procedures, and any specific precautions or warnings provided by the manufacturer.

2. Proper Ventilation: Ensure that the area where the air compressor is operated has adequate ventilation. Compressed air can produce high levels of heat and exhaust gases. Good ventilation helps dissipate heat, prevent the buildup of fumes, and maintain a safe working environment.

3. Personal Protective Equipment (PPE): Always wear appropriate personal protective equipment, including safety glasses or goggles, hearing protection, and non-slip footwear. Depending on the task, additional PPE such as gloves, a dust mask, or a face shield may be necessary to protect against specific hazards.

4. Pressure Relief: Air compressors should be equipped with pressure relief valves or devices to prevent overpressurization. Ensure that these safety features are in place and functioning correctly. Regularly inspect and test the pressure relief mechanism to ensure its effectiveness.

5. Secure Connections: Use proper fittings, hoses, and couplings to ensure secure connections between the air compressor, air tools, and accessories. Inspect all connections before operation to avoid leaks or sudden hose disconnections, which can cause injuries or damage.

6. Inspect and Maintain: Regularly inspect the air compressor for any signs of damage, wear, or leaks. Ensure that all components, including hoses, fittings, and safety devices, are in good working condition. Follow the manufacturer’s recommended maintenance schedule to keep the compressor in optimal shape.

7. Electrical Safety: If the air compressor is electric-powered, take appropriate electrical safety precautions. Use grounded outlets and avoid using extension cords unless approved for the compressor’s power requirements. Protect electrical connections from moisture and avoid operating the compressor in wet or damp environments.

8. Safe Start-Up and Shut-Down: Properly start and shut down the air compressor following the manufacturer’s instructions. Ensure that all air valves are closed before starting the compressor and release all pressure before performing maintenance or repairs.

9. Training and Competence: Ensure that operators are adequately trained and competent in using the air compressor and associated tools. Provide training on safe operating procedures, hazard identification, and emergency response protocols.

10. Emergency Preparedness: Have a clear understanding of emergency procedures and how to respond to potential accidents or malfunctions. Know the location of emergency shut-off valves, fire extinguishers, and first aid kits.

By adhering to these safety considerations and implementing proper safety practices, the risk of accidents and injuries associated with operating an air compressor can be significantly reduced. Prioritizing safety promotes a secure and productive working environment.

China wholesaler 380V 50Hz 3phase 7.5kw 10HP Mini Screw Air Compressor in Stock Energy Saving Type VSD Screw Air Compressor 75 Kw VSD Air Compressor Compressor Screw air compressor for sale
editor by CX 2023-11-06

China factory 50HP Direct Water Lubrication Single Screw Oil Free Air Compressor with Great quality

Product Description

Model: DCW-50A
Type: totally oil free water lubrication screw air compressor
Screw type: Single screw
Free air delivery: 5.9m3/min
Working pressure: 8 bar 0.8Mpa
Max pressure: 10 bar 1.0 Mpa
Control: PLC
Driven: direct
Cooling: by water
Electric motor: 50hp 37kW 380v/50hz/3ph,also can make 220v/60hz,380v/60hz,440v/60hz,600v/60hz,415v/50hz and dual voltage etc.
Discharge temperature: less than ambient +8 ºC
Noise: less than 71dB(A)
Air outlet size: G1 1/2″
Dimension: 1760*1250*1600mm
Weight: 1100kg

1. Air-end
Single screw air-end made by Japanese technology, The interior consists of 1 horizontal screw plus up & down 2 vertically placed star wheels, it’s more like “3 screws”. As this symmetrical structure design makes the axial force and radial force cancel each other, improve the stability of the operation and compression efficiency, but lesser noise.

No like the copper screw, our air-end is made buy stainless steel without any coating. Because copper screw has the possibility to generate verdigris which can spoiled your water and air, vanish all of your effort.

2. Motor
Custom made professional motor for oil-free series, motor as the driving component, it’s transmission ratio, service factor and rpm, almost everything affect directly to the driven component. We use permanent magnet motor which has no coil and many unnecessary parts, reduce the failure chance, decrease motor size and weight, but gives higher transmission ration.

3. Automatic Water level Switch
According to the internal circulating water, the switch will automatically turn-on and start replenish if needed, to ensure the lubrication and cooling effect, avoid overheating all the time without any supervision needed.

4. Air Filters
” Mann” Original filters, using the latest alternating closed filter chamber, combined with tandem filter alignment which increases 50% filtration area by small footprint, purify the air from the very beginning.

The entire element does not contain any metal parts, you can use simply do incineration or other easy treatment. The filter housing is reusable, just clean or replace the element, it saves resources and cost.

5. Valves
Original Japanese imported valves, the best option to prevent downtime caused by leakage, plugging etc,. Ensure quality not only by experiences, but also endorsement from well-know brands, as we know detail leads to success.

6. Cooling system
Reasonable cooling method, cooling method (by air/water) is optional due to customer, accurately calculate the needed cooling air/water to avoid additional energy consumption. Use copper heat ex-changer for better heat dissipation effect, help compressor performs always the best!

7. Intake valve
Custom made for every oil-free, like opening way, angle, diameter and other many aspects, to realize 0~100% adjustment air suction range automatically. In the meantime, the the seal ring can reduce pressure loss. It’s active and long life ensure stable loading and unloading for compressor.

8. Invetor
With the strategic cooperation agreement between CHINAMFG & Delta, every each invertor we use is special made from Delta, tolerate higher temperature, take care complex inlet power and maximize the performance of the permanent magnet motor. Relying on Delta’s CHINAMFG service, a better experiment is prepared for you.

9. Water/air separator
Self-develope and designed water/air separator, adopts vortex water-air separation technology, effectively separates the moisture from the compressed air, reduces the burden for after air treatment . It’s totally made by stainless steel, avoid rust, keep system clean.

10. Water softener
Softened water is the only water can be used in water lube compressor, but many impurities and micro elements are exist in our water sources, if use directly the local water, then impurities can damage air-end, tanks from inside.

Model	Cooling	Working Pressure		Air Delivery		Motor Power	Air/Water Cooling vloume	Dimension	Weight
		bar	psig	m3/min	cfm	kw/hp	L/min	mm	kg
DCW-10A	Air cooling	7	100	1.3	46	7.5/10	2	11008451260	520
		8	116	1.2	42
		10	145	/	/
DCW-15A		7	100	1.6	57	11/15	2.5/12.5	11008451260	580
		8	116	1.5	53
		10	145	1.4	49
DCW-20A		7	100	2.5	88	15/20	3.5/4	152011001400	620
		8	116	2.3	81
		10	145	2	71
DCW-25A		7	100	3.3	116	18.5/25	4	152011001400	720
		8	116	3.1	109
		10	145	2.5	88
DCW-30A		7	100	3.7	131	22/30	5	152011001400	830
		8	116	3.5	124
		10	145	3	106
DCW-40A	Water cooling	7	100	5.3	187	30/40	7	176012501600	980
		8	116	5	177
		10	145	4.3	152
DCW-50A		7	100	6.2	219	37/50	9	176012501600	1100
		8	116	5.9	208
		10	145	5	177
DCW-60A		7	100	7.5	265	45/60	10	190012501360	1250
		8	116	7	247
		10	145	6	212
DCW-75A		7	100	10	353	55/75	12	190012501360	1450
		8	116	9.5	335
		10	145	7.9	279
DCW-100A		7	100	13	459	75/100	18	200012501360	1600
		8	116	12.5	441
		10	145	10	353
DCW-125A		7	100	15	530	90/125	20	210018501700	2000
		8	116	13.5	477
		10	145	12.8	452
DCW-150A		7	100	20	706	110/150	24	210018501700	2500
		8	116	18.5	653
		10	145	16.5	582
DCW-175A		7	100	23.5	830	132/175	30	230019001900	2650
		8	116	23	812
		10	145	20	706
DCW-220A		7	100	26	918	160/220	35	230019001900	2800
		8	116	24	847
		10	145	23	812
DCW-250A		7	100	32.5	1147	180/250	43	230019001900	3000
		8	116	31	1094
		10	145	28	989
DCW-350A		7	100	42	1483	250/350	53	320021002000	4800

Our Service

1.24/7 after sales service support in different languages.
2.Follow up the feedback of products in 2 months interval by email or call.
3.Guidance of installation and commissioning on site can be provided by factory-trained technicians or local Authorized Service Center.
4.Technical training for customers in DEHAHA air compressor factory or working site.
5.Plenty of original spare parts with proven quality are all available from our central stocks in ZheJiang and all distributors’depots.
6.All kinds of technical documents in different languages.

1.Why customer choose us?
DEHAHA COMPRESSOR ZheJiang CO.,LTD.with 24 years old history,we are specialized in Rotary Screw Air Compressor.Germany Standard and 13 years exporting experience help us won more than 30 loyal foreign agents.We warmly welcome your small trial order for quality or market test.

2.Are you a manufacturer or trading company?
We are professional manufacturer with big modern factory in HangZhou,China,with professional design team.Both OEM & ODM service can be accepted.

3.Where is your factory located? How can I visit there?
Our factory is located in HangZhou City, ZheJiang Province, China. We can pick up you from ZheJiang , it’s about 1 hour from ZheJiang Xihu (West Lake) Dis. Airport to our factory. Warmly welcome to visit us!

4.What’s your delivery time?
380V 50HZ we can delivery the goods within 14 days. Other electricity or other color we will delivery within 22 days,if urgently order,pls contact our sales in advance.

5.How long is your air compressor warranty?
One year for the whole machine and 2 years for screw air end, except consumable spare parts and we can provide some spare parts of the machines.

6.How does your factory do regarding quality control?
Quality is everything. we always attach great importance to quality controlling from the very beginning to the very end. Our factory has gained ISO9001:2015 authentication and CE certificate.

7.How long could your air compressor be used?
Generally, more than 10 years.

8. What’s payment term?
T/T,L/C,D/P,Western Union,Paypal,Credit Card,and etc.Also we could accept USD, RMB, Euro and other currency.

9.How about your customer service?
24 hours on-line service available.48 hours problem solved promise.

10.How about your after-sales service?
(1) Provide customers with installation and commissioning online instructions.
(2) Well-trained engineers available to overseas service.
(3) CHINAMFG agents and after service available.

Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Angular
Structure Type:	Closed Type
Installation Type:	Stationary Type

Customization:	Available \|

air compressor

How does variable speed drive technology improve air compressor efficiency?

1. Matching Air Demand:

2. Reduced Unloaded Running Time:

3. Soft Starting:

4. Energy Savings at Partial Load:

5. Elimination of On/Off Cycling:

6. Enhanced System Control:

air compressor

How are air compressors used in refrigeration and HVAC systems?

Air compressors play a vital role in refrigeration and HVAC (Heating, Ventilation, and Air Conditioning) systems, providing the necessary compression of refrigerant gases and facilitating the heat transfer process. Here are the key ways in which air compressors are used in refrigeration and HVAC systems:

1. Refrigerant Compression:

In refrigeration systems, air compressors are used to compress the refrigerant gas, raising its pressure and temperature. This compressed gas then moves through the system, where it undergoes phase changes and heat exchange to enable cooling or heating. The compressor is the heart of the refrigeration cycle, as it pressurizes and circulates the refrigerant.

2. Refrigeration Cycle:

The compression of refrigerant gas by the air compressor is an essential step in the refrigeration cycle. After compression, the high-pressure, high-temperature gas flows to the condenser, where it releases heat and condenses into a liquid. The liquid refrigerant then passes through an expansion valve or device, which reduces its pressure and temperature. This low-pressure, low-temperature refrigerant then enters the evaporator, absorbing heat from the surrounding environment and evaporating back into a gas. The cycle continues as the gas returns to the compressor for re-compression.

3. HVAC Cooling and Heating:

In HVAC systems, air compressors are used to facilitate cooling and heating processes. The compressor compresses the refrigerant gas, which allows it to absorb heat from the indoor environment in the cooling mode. The compressed gas releases heat in the outdoor condenser unit and then circulates back to the compressor to repeat the cycle. In the heating mode, the compressor reverses the refrigeration cycle, absorbing heat from the outdoor air or ground source and transferring it indoors.

4. Air Conditioning:

Air compressors are an integral part of air conditioning systems, which are a subset of HVAC systems. Compressed refrigerant gases are used to cool and dehumidify the air in residential, commercial, and industrial buildings. The compressor pressurizes the refrigerant, initiating the cooling cycle that removes heat from the indoor air and releases it outside.

5. Compressor Types:

Refrigeration and HVAC systems utilize different types of air compressors. Reciprocating compressors, rotary screw compressors, and scroll compressors are commonly used in these applications. The selection of the compressor type depends on factors such as system size, capacity requirements, efficiency, and application-specific considerations.

6. Energy Efficiency:

Efficient operation of air compressors is crucial for refrigeration and HVAC systems. Energy-efficient compressors help minimize power consumption and reduce operating costs. Additionally, proper compressor sizing and system design contribute to the overall energy efficiency of refrigeration and HVAC systems.

By effectively compressing refrigerant gases and facilitating the heat transfer process, air compressors enable the cooling and heating functions in refrigeration and HVAC systems, ensuring comfortable indoor environments and efficient temperature control.

air compressor

What is the role of air compressor tanks?

Air compressor tanks, also known as receiver tanks or air receivers, play a crucial role in the operation of air compressor systems. They serve several important functions:

1. Storage and Pressure Regulation: The primary role of an air compressor tank is to store compressed air. As the compressor pumps air into the tank, it accumulates and pressurizes the air. The tank acts as a reservoir, allowing the compressor to operate intermittently while providing a steady supply of compressed air during periods of high demand. It helps regulate and stabilize the pressure in the system, reducing pressure fluctuations and ensuring a consistent supply of air.

2. Condensation and Moisture Separation: Compressed air contains moisture, which can condense as the air cools down inside the tank. Air compressor tanks are equipped with moisture separators or drain valves to collect and remove this condensed moisture. The tank provides a space for the moisture to settle, allowing it to be drained out periodically. This helps prevent moisture-related issues such as corrosion, contamination, and damage to downstream equipment.

3. Heat Dissipation: During compression, air temperature increases. The air compressor tank provides a larger surface area for the compressed air to cool down and dissipate heat. This helps prevent overheating of the compressor and ensures efficient operation.

4. Pressure Surge Mitigation: Air compressor tanks act as buffers to absorb pressure surges or pulsations that may occur during compressor operation. These surges can be caused by variations in demand, sudden changes in airflow, or the cyclic nature of reciprocating compressors. The tank absorbs these pressure fluctuations, reducing stress on the compressor and other components, and providing a more stable and consistent supply of compressed air.

5. Energy Efficiency: Air compressor tanks contribute to energy efficiency by reducing the need for the compressor to run continuously. The compressor can fill the tank during periods of low demand and then shut off when the desired pressure is reached. This allows the compressor to operate in shorter cycles, reducing energy consumption and minimizing wear and tear on the compressor motor.

6. Emergency Air Supply: In the event of a power outage or compressor failure, the stored compressed air in the tank can serve as an emergency air supply. This can provide temporary air for critical operations, allowing time for maintenance or repairs to be carried out without disrupting the overall workflow.

Overall, air compressor tanks provide storage, pressure regulation, moisture separation, heat dissipation, pressure surge mitigation, energy efficiency, and emergency backup capabilities. They are vital components that enhance the performance, reliability, and longevity of air compressor systems in various industrial, commercial, and personal applications.

China factory 50HP Direct Water Lubrication Single Screw Oil Free Air Compressor with Great quality
editor by CX 2023-11-03

China OEM Used Industrial Two-Stage Screw Oil Free CHINAMFG Zr55 Air Compressor air compressor parts

Product Description

CHINAMFG is renowned for designing and manufacturing the most durable oil-free tooth compressors. The ZR/ZT rotary tooth compressor comes out of this strong tradition. Ideal for industries where high-quality oil-free air is key, the ZR/ZT offers the highest reliability and safety in combination with low energy costs.
Oil-free air is used in all kinds of industries where air quality is paramount for the end product and production process. These applications include food and beverage processing, pharmaceutical manufacturing, chemical and petrochemical processing, fermentation, wastewater treatment, pneumatic conveying, non-woven textile manufacturing and many more.
With the ZR/ZT, we provide an all-in-1 standard package incorporating the latest technology in a built-tolast design. To further optimize your ZR/ZT’s performance or to simply tailor it to your specific production environment, optional features are available.

ZR/ZT110-275(FF)
Model	Hz	FAD			Power		Noise	Weight
		I/s	M³/min	cfm	kw	hp	db(A)	Standard		FF
		I/s	M³/min	cfm	kw	hp	db(A)	kg	Ibs	kg	Ibs
ZR110-7.5	50	318.2	19.1	674	110	150	69	2709	5972	2954	6512
ZR110-8.6	50	286.1	17.2	606	110	150	69	2709	5972	2954	6512
ZR110-10	50	266.5	16	565	110	150	69	2709	5972	2954	6512
ZR132-7.5	50	365.6	21.9	775	132	150	69	2900	6393	3145	6933
ZR132-8.6	50	326.4	19.6	692	132	150	69	2900	6393	3145	6933
ZR132-10	50	314.2	18.9	666	132	150	69	2900	6393	3145	6933
ZR145-7.5	50	391.6	23.5	830	145	200	70	2895	6382	3145	6933
ZR145-8.6	50	361.7	21.7	766	145	200	70	2895	6382	3145	6933
ZR145-10	50	334.5	20.1	709	145	200	69	2895	6382	3145	6933
ZR145-13	50	304	18.2	644	145	200	73	2895	6382	3145	6933
ZR160-7.5	50	472.2	28.3	1001	160	200	69	3760	8289	4670	15715
ZR160-8.6	50	435	26.1	922	160	200	69	3760	8289	4670	15715
ZR160-10	50	402.6	24.2	853	160	200	69	3760	8289	4670	15715
ZR200-7.5	50	602.1	36.1	1276	200	250	67	3860	8510	5230	11530
ZR200-8.6	50	551.6	33.1	1169	200	250	67	3860	8510	5230	11530
ZR200-10	50	506.2	30.4	1073	200	250	69	3860	8510	5230	11530
ZR250-7.5	50	717.6	43.1	1521	250	300	67	4310	9502	5680	12522
ZR250-8.6	50	683.8	41	1449	250	300	67	4310	9502	5680	12522
ZR250-10	50	622.5	37.4	1319	250	300	67	4310	9502	5680	12522
ZR250-13³	50	514.9	30.9	1091	250	300	70	4310	9502
ZR275-7.5	50	774.1	46.4	1640	275	350	67	4640	15719	6571	13250
ZR275-8.6	50	716.7	43	1518	275	350	67	4640	15719	6571	13250
ZR275-10	50	683.5	41	1448	275	350	67	4640	15719	6571	13250
ZR275-13³	50	561.8	33.7	1190	275	350	70	4640	15719
ZT110-7.5	50	306.9	18.4	650	110	150	71	3654	8056	4146	9140
ZT110-8.6	50	286.2	17.2	606	110	150	71	3654	8056	4146	9140
ZT110-10	50	266.9	16	566	110	150	71	3654	8056	4146	9140
ZT132-7.5	50	363.1	21.8	769	132	150	72	3845	8477	4355	9601
ZT132-8.6	50	325.2	19.5	689	132	150	72	3845	8477	4355	9601
ZT132-10	50	313.3	18.8	664	132	150	72	3845	8477	4355	9601
ZT145-7.5	50	387.3	23.2	821	145	200	72	3840	8466	4350	9590
ZT145-8.6	50	358.4	21.5	759	145	200	72	3840	8466	4350	9590
ZT145-10	50	332.3	19.9	704	145	200	72	3840	8466	4350	9590
ZT160-7.5	50	465.5	27.9	986	160	200	77	5150	11354	5590	12324
ZT160-8.6	50	428.3	25.7	908	160	200	77	5150	11354	5590	12324
ZT160-10	50	396.3	23.8	840	160	200	78	5150	11354	5590	12324
ZT200-7.5	50	568.4	34.1	1204	200	250	78	5250	11574	6150	13558
ZT200-8.6	50	521.7	31.3	1105	200	250	78	5250	11574	6150	13558
ZT200-10	50	499.6	30	1059	200	250	78	5250	11574	6150	13558
ZT250-7.5	50	706.3	42.4	1497	250	300	77	5700	12566	6600	14450
ZT250-8.6	50	673.5	40.4	1427	250	300	78	5700	12566	6600	14550
ZT250-10	50	613.9	36.8	1301	250	300	78	5700	12566	6600	14550
ZT275-7.5	50	738.1	44.3	1564	275	350	77	6030	13294	7080	15609
ZT275-8.6	50	706.3	42.4	1497	275	350	78	6030	13294	7080	15609
ZT275-10	50	673.1	40.4	1426	275	350	78	6030	13294	7080	15609

After-sales Service:	Online Support
Warranty:	12 Months
Lubrication Style:	Oil-free
Cooling System:	Water Cooling
Power Source:	AC Power
Cylinder Position:	Horizontal

Customization:	Available \|

air compressor

What are the energy-saving technologies available for air compressors?

There are several energy-saving technologies available for air compressors that help improve their efficiency and reduce energy consumption. These technologies aim to optimize the operation of air compressors and minimize energy losses. Here are some common energy-saving technologies used:

1. Variable Speed Drive (VSD) Compressors:

VSD compressors are designed to adjust the motor speed according to the compressed air demand. By varying the motor speed, these compressors can match the output to the actual air requirement, resulting in energy savings. VSD compressors are particularly effective in applications with varying air demands, as they can operate at lower speeds during periods of lower demand, reducing energy consumption.

2. Energy-Efficient Motors:

The use of energy-efficient motors in air compressors can contribute to energy savings. High-efficiency motors, such as those with premium efficiency ratings, are designed to minimize energy losses and operate more efficiently than standard motors. By using energy-efficient motors, air compressors can reduce energy consumption and achieve higher overall system efficiency.

3. Heat Recovery Systems:

Air compressors generate a significant amount of heat during operation. Heat recovery systems capture and utilize this wasted heat for other purposes, such as space heating, water heating, or preheating process air or water. By recovering and utilizing the heat, air compressors can provide additional energy savings and improve overall system efficiency.

4. Air Receiver Tanks:

Air receiver tanks are used to store compressed air and provide a buffer during periods of fluctuating demand. By using appropriately sized air receiver tanks, the compressed air system can operate more efficiently. The tanks help reduce the number of starts and stops of the air compressor, allowing it to run at full load for longer periods, which is more energy-efficient than frequent cycling.

5. System Control and Automation:

Implementing advanced control and automation systems can optimize the operation of air compressors. These systems monitor and adjust the compressed air system based on demand, ensuring that only the required amount of air is produced. By maintaining optimal system pressure, minimizing leaks, and reducing unnecessary air production, control and automation systems help achieve energy savings.

6. Leak Detection and Repair:

Air leaks in compressed air systems can lead to significant energy losses. Regular leak detection and repair programs help identify and fix air leaks promptly. By minimizing air leakage, the demand on the air compressor is reduced, resulting in energy savings. Utilizing ultrasonic leak detection devices can help locate and repair leaks more efficiently.

7. System Optimization and Maintenance:

Proper system optimization and routine maintenance are essential for energy savings in air compressors. This includes regular cleaning and replacement of air filters, optimizing air pressure settings, ensuring proper lubrication, and conducting preventive maintenance to keep the system running at peak efficiency.

By implementing these energy-saving technologies and practices, air compressor systems can achieve significant energy efficiency improvements, reduce operational costs, and minimize environmental impact.

air compressor

What is the energy efficiency of modern air compressors?

The energy efficiency of modern air compressors has significantly improved due to advancements in technology and design. Here’s an in-depth look at the energy efficiency features and factors that contribute to the efficiency of modern air compressors:

Variable Speed Drive (VSD) Technology:

Many modern air compressors utilize Variable Speed Drive (VSD) technology, also known as Variable Frequency Drive (VFD). This technology allows the compressor motor to adjust its speed according to the compressed air demand. By matching the motor speed to the required airflow, VSD compressors can avoid excessive energy consumption during periods of low demand, resulting in significant energy savings compared to fixed-speed compressors.

Air Leakage Reduction:

Air leakage is a common issue in compressed air systems and can lead to substantial energy waste. Modern air compressors often feature improved sealing and advanced control systems to minimize air leaks. By reducing air leakage, the compressor can maintain optimal pressure levels more efficiently, resulting in energy savings.

Efficient Motor Design:

The motor of an air compressor plays a crucial role in its energy efficiency. Modern compressors incorporate high-efficiency electric motors that meet or exceed established energy efficiency standards. These motors are designed to minimize energy losses and operate more efficiently, reducing overall power consumption.

Optimized Control Systems:

Advanced control systems are integrated into modern air compressors to optimize their performance and energy consumption. These control systems monitor various parameters, such as air pressure, temperature, and airflow, and adjust compressor operation accordingly. By precisely controlling the compressor’s output to match the demand, these systems ensure efficient and energy-saving operation.

Air Storage and Distribution:

Efficient air storage and distribution systems are essential for minimizing energy losses in compressed air systems. Modern air compressors often include properly sized and insulated air storage tanks and well-designed piping systems that reduce pressure drops and minimize heat transfer. These measures help to maintain a consistent and efficient supply of compressed air throughout the system, reducing energy waste.

Energy Management and Monitoring:

Some modern air compressors feature energy management and monitoring systems that provide real-time data on energy consumption and performance. These systems allow operators to identify energy inefficiencies, optimize compressor settings, and implement energy-saving practices.

It’s important to note that the energy efficiency of an air compressor also depends on factors such as the specific model, size, and application. Manufacturers often provide energy efficiency ratings or specifications for their compressors, which can help in comparing different models and selecting the most efficient option for a particular application.

Overall, modern air compressors incorporate various energy-saving technologies and design elements to enhance their efficiency. Investing in an energy-efficient air compressor not only reduces operational costs but also contributes to sustainability efforts by minimizing energy consumption and reducing carbon emissions.

air compressor

What are the safety considerations when operating an air compressor?

Operating an air compressor requires careful attention to safety to prevent accidents, injuries, and equipment damage. Here are some important safety considerations to keep in mind:

China OEM Used Industrial Two-Stage Screw Oil Free CHINAMFG Zr55 Air Compressor air compressor parts
editor by CX 2023-11-03

China Professional High Pressure Amair CT30 Rotary Screw Air Compressor with Air Dryer for Compressor Working best air compressor

Product Description

Refrigerated Compressed Air Dryer (Built-In Pre-Cooler)

Detailed Photos

Principle of working :
The amount of water vapor in the air compression by compressed air temperature determined: in case of compressed air pressure is basically the same, reduce the temperature of the air compressed compression to reduce the amount of water vapor in the air, and the excess water vapor will condense into liquid.
Freezing dryer is according to the corresponding relationship between the saturation water vapor pressure and temperature, use refrigeration device makes the compressed air is cooled to a certain dew point temperature, precipitation containing water, through the steam water separator and electric drainage device will discharge water, so that the compressed air can be dry.

Product Parameters

Model	Air Capacity (Nm3/min)	Voltage (V)	Fan Power (W)	Air connector dia	Net weight (Kg)	Lenghth (mm)	Wideth (mm)	Height (mm)	Air flow (Nm3/n)
SDLF-0.5	0.65	220	80	G1″	54	400	560	730	820
SDLF-1	1.2	220	80	G1″	57	400	560	730	820
SDLF-2	2.5	220	100	G1″	66	520	640	890	1640
SDLF-3	3.6	220	135	G1″	79	520	640	890	2670
SDLF-4.5	5.0	220	250	G1-1/2″	86	540	700	1000	4650
SDLF-6	6.8	220	250	G1-1/2″	90	540	700	1000	4650
SDLF-8	8.5	220	270	G2″	99	610	900	1070	5700
SDLF-10	10.9	380/220	260	G2″	113	610	900	1070	5700
SDLF-12	12.8	380/200	260	G2″	113	610	900	1070	5700

Note: The above models use plate/plate-fin heat exchangers.

Company Profile

Certifications

Packaging & Shipping

FAQ

After-sales Service:	Ok
Warranty:	1 Year
Flow:	Cross Flow
Material Status:	Bulk
Drying Medium:	Air
Structure:	All Kinds

Samples:	US$ 400/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \|

air compressor

What role do air dryers play in compressed air systems?

Air dryers play a crucial role in compressed air systems by removing moisture and contaminants from the compressed air. Compressed air, when generated, contains water vapor from the ambient air, which can condense and cause issues in the system and end-use applications. Here’s an overview of the role air dryers play in compressed air systems:

1. Moisture Removal:

Air dryers are primarily responsible for removing moisture from the compressed air. Moisture in compressed air can lead to problems such as corrosion in the system, damage to pneumatic tools and equipment, and compromised product quality in manufacturing processes. Air dryers utilize various techniques, such as refrigeration, adsorption, or membrane separation, to reduce the dew point of the compressed air and eliminate moisture.

2. Contaminant Removal:

In addition to moisture, compressed air can also contain contaminants like oil, dirt, and particles. Air dryers help in removing these contaminants to ensure clean and high-quality compressed air. Depending on the type of air dryer, additional filtration mechanisms may be incorporated to enhance the removal of oil, particulates, and other impurities from the compressed air stream.

3. Protection of Equipment and Processes:

By removing moisture and contaminants, air dryers help protect the downstream equipment and processes that rely on compressed air. Moisture and contaminants can negatively impact the performance, reliability, and lifespan of pneumatic tools, machinery, and instrumentation. Air dryers ensure that the compressed air supplied to these components is clean, dry, and free from harmful substances, minimizing the risk of damage and operational issues.

4. Improved Productivity and Efficiency:

Utilizing air dryers in compressed air systems can lead to improved productivity and efficiency. Dry and clean compressed air reduces the likelihood of equipment failures, downtime, and maintenance requirements. It also prevents issues such as clogging of air lines, malfunctioning of pneumatic components, and inconsistent performance of processes. By maintaining the quality of compressed air, air dryers contribute to uninterrupted operations, optimized productivity, and cost savings.

5. Compliance with Standards and Specifications:

Many industries and applications have specific standards and specifications for the quality of compressed air. Air dryers play a vital role in meeting these requirements by ensuring that the compressed air meets the desired quality standards. This is particularly important in industries such as food and beverage, pharmaceuticals, electronics, and automotive, where clean and dry compressed air is essential for product integrity, safety, and regulatory compliance.

By incorporating air dryers into compressed air systems, users can effectively control moisture and contaminants, protect equipment and processes, enhance productivity, and meet the necessary quality standards for their specific applications.

air compressor

How do you choose the right air compressor for woodworking?

Choosing the right air compressor for woodworking is essential to ensure efficient and effective operation of pneumatic tools and equipment. Here are some factors to consider when selecting an air compressor for woodworking:

1. Required Air Volume (CFM):

Determine the required air volume or cubic feet per minute (CFM) for your woodworking tools and equipment. Different tools have varying CFM requirements, so it is crucial to choose an air compressor that can deliver the required CFM to power your tools effectively. Make sure to consider the highest CFM requirement among the tools you’ll be using simultaneously.

2. Tank Size:

Consider the tank size of the air compressor. A larger tank allows for more stored air, which can be beneficial when using tools that require short bursts of high air volume. It helps maintain a consistent air supply and reduces the frequency of the compressor cycling on and off. However, if you have tools with continuous high CFM demands, a larger tank may not be as critical.

3. Maximum Pressure (PSI):

Check the maximum pressure (PSI) rating of the air compressor. Woodworking tools typically operate within a specific PSI range, so ensure that the compressor can provide the required pressure. It is advisable to choose an air compressor with a higher maximum PSI rating to accommodate any future tool upgrades or changes in your woodworking needs.

4. Noise Level:

Consider the noise level of the air compressor, especially if you’ll be using it in a residential or shared workspace. Some air compressors have noise-reducing features or are designed to operate quietly, making them more suitable for woodworking environments where noise control is important.

5. Portability:

Assess the portability requirements of your woodworking projects. If you need to move the air compressor frequently or work in different locations, a portable and lightweight compressor may be preferable. However, if the compressor will remain stationary in a workshop, a larger, stationary model might be more suitable.

6. Power Source:

Determine the power source available in your woodworking workspace. Air compressors can be powered by electricity or gasoline engines. If electricity is readily available, an electric compressor may be more convenient and cost-effective. Gasoline-powered compressors offer greater flexibility for remote or outdoor woodworking projects where electricity may not be accessible.

7. Quality and Reliability:

Choose an air compressor from a reputable manufacturer known for producing reliable and high-quality equipment. Read customer reviews and consider the warranty and after-sales support offered by the manufacturer to ensure long-term satisfaction and reliability.

8. Budget:

Consider your budget and balance it with the features and specifications required for your woodworking needs. While it’s important to invest in a reliable and suitable air compressor, there are options available at various price points to accommodate different budgets.

By considering these factors and evaluating your specific woodworking requirements, you can choose an air compressor that meets the demands of your tools, provides efficient performance, and enhances your woodworking experience.

air compressor

What is the impact of tank size on air compressor performance?

The tank size of an air compressor plays a significant role in its performance and functionality. Here are the key impacts of tank size:

1. Air Storage Capacity: The primary function of the air compressor tank is to store compressed air. A larger tank size allows for greater air storage capacity. This means the compressor can build up a reserve of compressed air, which can be useful for applications that require intermittent or fluctuating air demand. Having a larger tank ensures a steady supply of compressed air during peak usage periods.

2. Run Time: The tank size affects the run time of the air compressor. A larger tank can provide longer continuous operation before the compressor motor needs to restart. This is because the compressed air in the tank can be used to meet the demand without the need for the compressor to run continuously. It reduces the frequency of motor cycling, which can improve energy efficiency and prolong the motor’s lifespan.

3. Pressure Stability: A larger tank helps maintain stable pressure during usage. When the compressor is running, it fills the tank until it reaches a specified pressure level, known as the cut-out pressure. As the air is consumed from the tank, the pressure drops to a certain level, known as the cut-in pressure, at which point the compressor restarts to refill the tank. A larger tank size results in a slower pressure drop during usage, ensuring more consistent and stable pressure for the connected tools or equipment.

4. Duty Cycle: The duty cycle refers to the amount of time an air compressor can operate within a given time period. A larger tank size can increase the duty cycle of the compressor. The compressor can run for longer periods before reaching its duty cycle limit, reducing the risk of overheating and improving overall performance.

5. Tool Compatibility: The tank size can also impact the compatibility with certain tools or equipment. Some tools, such as high-demand pneumatic tools or spray guns, require a continuous and adequate supply of compressed air. A larger tank size ensures that the compressor can meet the air demands of such tools without causing pressure drops or affecting performance.

It is important to note that while a larger tank size offers advantages in terms of air storage and performance, it also results in a larger and heavier compressor unit. Consider the intended application, available space, and portability requirements when selecting an air compressor with the appropriate tank size.

Ultimately, the optimal tank size for an air compressor depends on the specific needs of the user and the intended application. Assess the air requirements, duty cycle, and desired performance to determine the most suitable tank size for your air compressor.

China Professional High Pressure Amair CT30 Rotary Screw Air Compressor with Air Dryer for Compressor Working best air compressor
editor by CX 2023-11-03

China Good quality CHINAMFG Portable 230/50 AC Power Single Piston 750W Oil Lubricated 8bar H Belt Driven Air Compressor 50L 60L 70L wholesaler

Product Description

Model	Voltage	Power		Cylinder	Speed	Theoretic Displacement	Pressure	Tank	Tank Size
Model	V/HZ/ph	Kw	HP	mm*n	r.p.m.	L/min	bar/psi	L	mm*mm
XY1065A-50	220V/50HZ/1	0.75	1.0	¢65*1	1280	161	8/115	50	¢280*600

Model description
XY1065A-50
XY: CHINAMFG company;
1: 1pc cylinder;
65: cylinder diameter 65(mm);
A: air pump type A;
50: tank volume 50L;

Product advanatge
1.belt-driven 2 cylinders unit, with stable & completely closed belt guard
2.motor circuit breaker,start capacitor or three-phase versions for good starting performance
3.easy-open drain valve
4.pressure switch with cut-in/cut-off pressure 5.regulator with gauge to show pressure
6.quick connector is available
7.petrol engine air compressor with master unloader& throttle
control for better pressure control & petrol saving
8.plastic coating tank

Explosive

Installation Instructions

Application

Similar products

Packaging & Shipping

Company Profile

Founded in 1988, we are proessional in water pump & air compressor, develop solar pump in 2011. We are ZHangZhoug key private enterprise and pioneering backbone enterprise. We have the most advanced technology in both production and management. We have a very powerful Research & Development team. We carry on strict monitoring and control to products by many kinds of advanced apparatus with third-party qualified laboratory. Our products have been approved by RoHS,EMC and CE certificate.

XINYAc ompany, pays much attention to the perfect integration of performance and appearance,so that you can safely enjoy XINYAproducts.All CHINAMFG products are checked routinely and strictly,and every detail in design is optimized in particular use of CHINAMFG products.

Certifications

FAQ

Q: Are you manufacturer or trading factory?
A: We are factory, located in HangZhou pump industry zone.

Q: What is your MOQ?
A:

Product	ready good	Customized goods
Vibration pump	1pc/model	1000pcs/model
Solar pump	1pc/model	50pcs/model
Direct-driven air compressor	1pc/model	100pcs/model
Belt-driven air compressor	1pc/model	mixed model for 1*40HQ
Oil free air compressor	1pc/model	100pcs/model
Air pump	1pc/model	100pcs/model

Q: May OEM?
A: OK, pls provide your logo design files when PI is comfirmed.

Q: May I buy 1pc sample first? And How long?
A: Of course, we support sampling order, especially for new customers.
Ready goods, within 3 working days; Customized goods, 15-45 days.

Q: What is your Payment terms?
A: Sample: 100% payment in advance
Official order: 30% deposit TT and 70% balance against BL copy

Q: What about the warranty?
A: one-year quality guarantee policy. Money refunded if any quality issues come up.

Q: Where is the landing port?
A: HangZhou port, China.
If ZheJiang or other port, pls inform us in advance.

Q: May I visit your factory? Where?
A: Welcome to ZHangZhoug CHINAMFG Pump Industry Co.,ltd
Address: DaXi Pump Industrial Zone, DaXi Town, WenLing City, ZheJiang Province, China.

Nearest railway station:
1. HangZhou station,
2. HangZhou station,
3. HangZhou station;

Nearest air port:
1. HangZhou airport,
2. HangZhou airport;

After-sales Service:	Online After Service
Warranty:	1 Year Warranty
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Cylinder Position:	Vertical
Structure Type:	Closed Type

Customization:	Available \|

air compressor

What role do air dryers play in compressed air systems?

1. Moisture Removal:

2. Contaminant Removal:

3. Protection of Equipment and Processes:

4. Improved Productivity and Efficiency:

5. Compliance with Standards and Specifications:

air compressor

Can air compressors be used for inflating tires and sporting equipment?

Yes, air compressors can be used for inflating tires and sporting equipment, providing a convenient and efficient method for achieving the desired air pressure. Here’s how air compressors are used for these purposes:

1. Tire Inflation:

Air compressors are commonly used for inflating vehicle tires, including car tires, motorcycle tires, bicycle tires, and even larger truck or trailer tires. Air compressors provide a continuous source of pressurized air, allowing for quick and accurate inflation. They are often used in automotive repair shops, gas stations, and by individuals who regularly need to inflate tires.

2. Sporting Equipment Inflation:

Air compressors are also useful for inflating various types of sporting equipment. This includes inflatable balls such as soccer balls, basketballs, footballs, and volleyballs. Additionally, air compressors can be used to inflate inflatable water toys, air mattresses, inflatable kayaks, and other recreational items that require air for proper inflation.

3. Air Tools for Inflation:

Air compressors can power air tools specifically designed for inflation purposes. These tools, known as inflators or air blow guns, provide controlled airflow for inflating tires and sporting equipment. They often have built-in pressure gauges and nozzles designed to fit different types of valves, making them versatile and suitable for various inflation tasks.

4. Adjustable Pressure:

One advantage of using air compressors for inflation is the ability to adjust the pressure. Most air compressors allow users to set the desired pressure level using a pressure regulator or control knob. This feature ensures that tires and sporting equipment are inflated to the recommended pressure, promoting optimal performance and safety.

5. Efficiency and Speed:

Air compressors provide a faster and more efficient inflation method compared to manual pumps. The continuous supply of compressed air allows for quick inflation, reducing the time and effort required to inflate tires and sporting equipment manually.

6. Portable Air Compressors:

For inflating tires and sporting equipment on the go, portable air compressors are available. These compact and lightweight compressors can be easily carried in vehicles or taken to sports events and outdoor activities, ensuring convenient access to a reliable air supply.

It is important to note that when using air compressors for inflating tires, it is recommended to follow manufacturer guidelines and proper inflation techniques to ensure safety and avoid overinflation.

air compressor

How is air pressure measured in air compressors?

Air pressure in air compressors is typically measured using one of two common units: pounds per square inch (PSI) or bar. Here’s a brief explanation of how air pressure is measured in air compressors:

1. Pounds per Square Inch (PSI): PSI is the most widely used unit of pressure measurement in air compressors, especially in North America. It represents the force exerted by one pound of force over an area of one square inch. Air pressure gauges on air compressors often display pressure readings in PSI, allowing users to monitor and adjust the pressure accordingly.

2. Bar: Bar is another unit of pressure commonly used in air compressors, particularly in Europe and many other parts of the world. It is a metric unit of pressure equal to 100,000 pascals (Pa). Air compressors may have pressure gauges that display readings in bar, providing an alternative measurement option for users in those regions.

To measure air pressure in an air compressor, a pressure gauge is typically installed on the compressor’s outlet or receiver tank. The gauge is designed to measure the force exerted by the compressed air and display the reading in the specified unit, such as PSI or bar.

It’s important to note that the air pressure indicated on the gauge represents the pressure at a specific point in the air compressor system, typically at the outlet or tank. The actual pressure experienced at the point of use may vary due to factors such as pressure drop in the air lines or restrictions caused by fittings and tools.

When using an air compressor, it is essential to set the pressure to the appropriate level required for the specific application. Different tools and equipment have different pressure requirements, and exceeding the recommended pressure can lead to damage or unsafe operation. Most air compressors allow users to adjust the pressure output using a pressure regulator or similar control mechanism.

Regular monitoring of the air pressure in an air compressor is crucial to ensure optimal performance, efficiency, and safe operation. By understanding the units of measurement and using pressure gauges appropriately, users can maintain the desired air pressure levels in their air compressor systems.

China Good quality CHINAMFG Portable 230/50 AC Power Single Piston 750W Oil Lubricated 8bar H Belt Driven Air Compressor 50L 60L 70L wholesaler
editor by CX 2023-11-02

China factory Zat-200 160kw Portable Two-Stage Compression Air Compressors air compressor CHINAMFG freight

Product Description

ZAT-200 160kw Two-stage compression air compressors portable manufacturer

ZAKF air compressor belongs to the general equipment category, and is widely used in steel, electric power, metallurgy, shipbuilding, electronics, textile, mining, chemical, petroleum, light industry, paper printing, machinery manufacturing, food and medicine, transportation facilities, casting spraying, and shipping terminals , Automotive industry, military technology, aerospace, infrastructure and other fields.

direct drive air compressor

screw air compressor manufacturer

ac air compressor

tyre air compressor

screw air compressor price

air compressor for sand blasting

air compressor made in china

silent oil free air compressor

portable air compressor 220v

high pressure air compressor price

best price air compressor machine

mini air compressor 220v

air compressor with dryer

screw air compressor with dryer

air dryer for air compressor

air compressor dryer

compressor air dryer

air compressor

compressor

air compressor machines

air compressors compressor

compressor scrap

compressor refrigerator

screw air compressor

screw compressor

refrigeration compressor for sale

compresor de aire

compressed air tank

scroll air compressor

air compressors portable

compresor

air tank

gas tank

industrial air compressor

vertical compressor air receiver 1000L

air compressor price

air compressor tank

air compressor manufacturers

zakf screw compressor

air receiver

industrial air compressor prices

price of air compressor

freeze dryer price

pressure tank

electric air compressors

stainless steel air tank

10hp air compressor

freeze drying equipment

Product Brand

ZAKF import advanced technology from Europe, through constant practice and improvement, design a new generation of “ZAKF” air compressor.
Improved quality assurance manual, advanced production process, control management program files comprehensive, standardized, ensuring high quality brand name products “ZAKF”, stable and durable. High quality, intimate service get the praise from users all over the world.

Why use CHINAMFG screw air compressor?

1. we are air compressor factory, quality and deliver time is under control, compessor colour, logo, voltage, pressure , motor can customized.

2. Monthly output capacity is 1500set machine, Quality has been recognized by the market

3. All English Compressor data and manual .

4. 24hours After-sale service.

5. our own factory, visit factory on anytime you want.

6.  Top quality spare parts
A.   Air filter:  air filter, Dust removal effect 99.99%, work good under bad enviroment
B.   Oil filter: Oil filter with glass fiber filter material with spin on type, the filtration effect is 20% higher than the conventional filter element
C.  Air / oil separator: Large-capacity design, high-quality air and oil separation, three time oil and gas separation, oil content below 2ppm
D.  Thermostat valve:  Prevent the temperature of the lubricant from being too high make oil emulsification or too low make oil carbon deposit
, Guaranteed long-term use of lubricating oil and good sealing performance

7. energy saving and environmental protection , especially the Inverter machine / Two stage machine, 50HP for example:
When the air demand becomes small, the air compressor frequency is automatically reduced, the power sequentially reduced 50HP to 40HP to 30HP,20hp….
When the air gas demand becomes larger, the frequency of the air compressor automatically increases, the power is sequentially increased 30HP to 40HP to 50HP…

8. Inverter machine is good at Power saving, and Saving electricity bills, 37kw /50HP for example (energy saving 20% -25% )
37kw * 20% * 22hours one day * 312 days one year * us$ 0.15 kw/h (electricity cost) = us$ 7619.00 / year
our inverter compressor machine can save us$ 7619.00 each year for you of the electricity cost

Where you use?

Product parameters

Model

ZAT-20

ZAT-25

ZAT-30

ZAT-40

ZAT-50

ZAT-60

ZAT-75

ZAT-100

ZAT-120

ZAT-150

ZAT-175

ZAT-200

ZAT-250

ZAT-300

ZAT-350

ZAT-375

ZAT-420

Power

18.5

110

132

160

185

200

250

280

315

Capacity

m³/Min/MPa

2.9/0.7

3.6/0.7

4.2/0.7

6.4/0.7

7.1/0.7

9.8/0.7

12.2/0.7

16.8/0.7

19.8/0.7

23.6/0.7

30.7/0.7

34.5/0.7

41.0/0.7

44.6/0.7

50.0/0.7

60.0/0.7

67.5/0.7

2.8/0.8

3.5/0.8

4.1/0.8

6.3/0.8

7.0/0.8

9.7/0.8

12.0/0.8

16.5/0.8

19.2/0.8

23.1/0.8

28.0/0.8

33.6/0.8

38.4/0.8

43.0/0.8

54.0/0.8

51.0/0.8

65.0/0.8

2.4/1.0

2.9/1.0

3.5/1.0

4.9/1.0

5.8/1.0

7.8/1.0

9.6/1.0

12.5/1.0

16.9/1.0

19.7/1.0

23.5/1.0

30.0/1.0

32.5/1.0

38.5/1.0

46.0/1.0

50.0/0.7

61.0/1.0

2.2/1.3

2.5/1.3

3.2/1.3

4.2/1.3

5.4/1.3

6.5/1.3

8.6/1.3

11.2/1.3

14.3/1.3

17.6/1.3

19.8/1.3

23.8/1.3

24.8/1.3

32.8/1.3

40.0/1.3

45.0/1.3

51.0/1.3

Compress Stage

Double stage compression / double stage frequency conversion compression / permanent magnet double frequency conversion

Ambient Temperature(ºC)

-5ºC ± 45ºC

Cooling Method

Air Cooling/Water Cooling/Oil Cooling

Exhaust Temperature(ºC)

≤Ambient temperature

– 769 – 81624099

Web: cnjiubei

Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical
Structure Type:	Closed Type
Installation Type:	Stationary Type

Customization:	Available \|

air compressor

How does variable speed drive technology improve air compressor efficiency?

1. Matching Air Demand:

2. Reduced Unloaded Running Time:

3. Soft Starting:

4. Energy Savings at Partial Load:

5. Elimination of On/Off Cycling:

6. Enhanced System Control:

air compressor

How do you troubleshoot common air compressor problems?

Troubleshooting common air compressor problems can help identify and resolve issues that may affect the performance and functionality of the compressor. Here are some steps to troubleshoot common air compressor problems:

1. No Power:

Check the power source and ensure the compressor is properly plugged in.
Inspect the circuit breaker or fuse box to ensure it hasn’t tripped or blown.
Verify that the compressor’s power switch or control panel is turned on.

2. Low Air Pressure:

Check the air pressure gauge on the compressor. If the pressure is below the desired level, the compressor might not be building up enough pressure.
Inspect for air leaks in the system. Leaks can cause a drop in pressure. Listen for hissing sounds or use a soapy water solution to identify the location of leaks.
Ensure the compressor’s intake filter is clean and not clogged, as this can restrict airflow and reduce pressure.

3. Excessive Noise or Vibration:

Inspect the compressor’s mounting and foundation to ensure it is secure and stable. Loose mounts can cause excessive noise and vibration.
Check for loose or damaged components, such as belts, pulleys, or motor mounts. Tighten or replace as necessary.
Verify that the compressor’s cooling system, such as the fan or fins, is clean and free from obstructions. Overheating can lead to increased noise and vibration.

4. Air Leaks:

Inspect all connections, valves, fittings, and hoses for leaks. Tighten or replace any loose or damaged components.
Apply a soapy water solution to suspected areas and look for bubbles. Bubbles indicate air leaks.
Consider using thread sealant or Teflon tape on threaded connections to ensure a proper seal.

5. Excessive Moisture in Compressed Air:

Check the compressor’s drain valve and ensure it is functioning properly. Open the valve to release any accumulated moisture.
Inspect and clean the compressor’s moisture separator or air dryer, if equipped.
Consider installing additional filtration or drying equipment to remove moisture from the compressed air system.

6. Motor Overheating:

Ensure the compressor’s cooling system is clean and unobstructed.
Check the motor’s air intake vents and clean any dust or debris that may be blocking airflow.
Verify that the compressor is not being operated in an excessively hot environment.
Check the motor’s lubrication levels and ensure they are within the manufacturer’s recommended range.
Consider using a thermal overload protector to prevent the motor from overheating.

If troubleshooting these common problems does not resolve the issue, it may be necessary to consult the manufacturer’s manual or seek assistance from a qualified technician. Regular maintenance, such as cleaning, lubrication, and inspection, can also help prevent common problems and ensure the optimal performance of the air compressor.

air compressor

Can you explain the basics of air compressor terminology?

Understanding the basic terminology related to air compressors can help in better comprehension of their operation and discussions related to them. Here are some essential terms related to air compressors:

1. CFM (Cubic Feet per Minute): CFM is a unit of measurement that denotes the volumetric flow rate of compressed air. It indicates the amount of air a compressor can deliver within a minute and is a crucial factor in determining the compressor’s capacity.

2. PSI (Pounds per Square Inch): PSI is a unit of measurement used to quantify pressure. It represents the force exerted by the compressed air on a specific area. PSI is a vital specification for understanding the pressure capabilities of an air compressor and determining its suitability for various applications.

3. Duty Cycle: Duty cycle refers to the percentage of time an air compressor can operate in a given time period. It indicates the compressor’s ability to handle continuous operation without overheating or experiencing performance issues. For instance, a compressor with a 50% duty cycle can run for half the time in a given hour or cycle.

4. Horsepower (HP): Horsepower is a unit used to measure the power output of a compressor motor. It indicates the motor’s capacity to drive the compressor pump and is often used as a reference for comparing different compressor models.

5. Receiver Tank: The receiver tank, also known as an air tank, is a storage vessel that holds the compressed air delivered by the compressor. It helps in stabilizing pressure fluctuations, allowing for a more consistent supply of compressed air during peak demand periods.

6. Single-Stage vs. Two-Stage: These terms refer to the number of compression stages in a reciprocating air compressor. In a single-stage compressor, air is compressed in a single stroke of the piston, while in a two-stage compressor, it undergoes initial compression in one stage and further compression in a second stage, resulting in higher pressures.

7. Oil-Free vs. Oil-Lubricated: These terms describe the lubrication method used in air compressors. Oil-free compressors have internal components that do not require oil lubrication, making them suitable for applications where oil contamination is a concern. Oil-lubricated compressors use oil for lubrication, enhancing durability and performance but requiring regular oil changes and maintenance.

8. Pressure Switch: A pressure switch is an electrical component that automatically starts and stops the compressor motor based on the pre-set pressure levels. It helps maintain the desired pressure range in the receiver tank and protects the compressor from over-pressurization.

9. Regulator: A regulator is a device used to control and adjust the output pressure of the compressed air. It allows users to set the desired pressure level for specific applications and ensures a consistent and safe supply of compressed air.

These are some of the fundamental terms associated with air compressors. Familiarizing yourself with these terms will aid in understanding and effectively communicating about air compressors and their functionality.

China factory Zat-200 160kw Portable Two-Stage Compression Air Compressors air compressor CHINAMFG freight
editor by CX 2023-11-02

China high quality High Consistency All-in-One Screw Air Compressor for Laser Cutting Machine portable air compressor

Product Description

High Consistency All-in-1 Screw Air Compressor For Laser Cutting Machine

1. Who are we?
We are based in ZheJiang , China, starting from 2003, specializing in refrigeration industry for 20 years, and staff in our company is more than 100, meanwhile, our footprints are all over China, playing more and more important role in international market.

2.What can you buy from us?
Refrigeration Compressors, Condensing Units, Refrigeration Equipment, thermal insulation Sandwich Panels and other Parts, also, we provide turn-key solutions and products according to your needs.

3. Why choose us?
We can list the advantages and disadvantages of different solutions (Construction Cost, Running Cost, Maintenance Cost and etc ), which may help you make a decision.

4. How can we guarantee quality?
All parts have gone through strict test before assembly in batch, and the finished goods will go through quality test before packing and shipping, also we provide after-services both online and local technical instruction if necessary.

5. What is your standard delivery time and shipping port?
It usually takes 10~20 working days for standard parts. And for customized products, it may take 20~30 working days. Departing from ZheJiang , ZheJiang and other Ports.

After-sales Service:	Online
Warranty:	1 Year
Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Cylinder Arrangement:	Duplex Arrangement
Cylinder Position:	Angular

Samples:	US$ 500/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \|

air compressor

What are the advantages of using an air compressor in construction?

Using an air compressor in construction offers numerous advantages that contribute to increased efficiency, productivity, and versatility. Here are some key benefits of using air compressors in construction:

Powering Pneumatic Tools: Air compressors are commonly used to power a wide range of pneumatic tools on construction sites. Tools such as jackhammers, nail guns, impact wrenches, drills, and sanders can be operated using compressed air. Pneumatic tools are often preferred due to their lightweight, compact design and ability to deliver high torque or impact force.
Efficient Operation: Air compressors provide a continuous and reliable source of power for pneumatic tools, allowing for uninterrupted operation without the need for frequent battery changes or recharging. This helps to maintain a smooth workflow and reduces downtime.
Portability: Many construction air compressors are designed to be portable, featuring wheels or handles for easy maneuverability on job sites. Portable air compressors can be transported to different areas of the construction site as needed, providing power wherever it is required.
Versatility: Air compressors are versatile tools that can be used for various applications in construction. Apart from powering pneumatic tools, they can also be utilized for tasks such as inflating tires, cleaning debris, operating air-operated pumps, and powering air horns.
Increased Productivity: The efficient operation and power output of air compressors enable construction workers to complete tasks more quickly and effectively. Pneumatic tools powered by air compressors often offer higher performance and faster operation compared to their electric or manual counterparts.
Cost Savings: Air compressors can contribute to cost savings in construction projects. Pneumatic tools powered by air compressors are generally more durable and have longer lifespans compared to electric tools. Additionally, since air compressors use compressed air as their power source, they do not require the purchase or disposal of batteries or fuel, reducing ongoing operational expenses.
Reduced Electrocution Risk: Construction sites can be hazardous environments, with the risk of electrocution from electrical tools or equipment. By utilizing air compressors and pneumatic tools, the reliance on electrical power is minimized, reducing the risk of electrocution accidents.

It is important to select the appropriate air compressor for construction applications based on factors such as required air pressure, volume, portability, and durability. Regular maintenance, including proper lubrication and cleaning, is crucial to ensure the optimal performance and longevity of air compressors in construction settings.

In summary, the advantages of using air compressors in construction include powering pneumatic tools, efficient operation, portability, versatility, increased productivity, cost savings, and reduced electrocution risk, making them valuable assets on construction sites.

air compressor

Can air compressors be integrated into automated systems?

Yes, air compressors can be integrated into automated systems, providing a reliable and versatile source of compressed air for various applications. Here’s a detailed explanation of how air compressors can be integrated into automated systems:

Pneumatic Automation:

Air compressors are commonly used in pneumatic automation systems, where compressed air is utilized to power and control automated machinery and equipment. Pneumatic systems rely on the controlled release of compressed air to generate linear or rotational motion, actuating valves, cylinders, and other pneumatic components. By integrating an air compressor into the system, a continuous supply of compressed air is available to power the automation process.

Control and Regulation:

In automated systems, air compressors are often connected to a control and regulation system to manage the compressed air supply. This system includes components such as pressure regulators, valves, and sensors to monitor and adjust the air pressure, flow, and distribution. The control system ensures that the air compressor operates within the desired parameters and provides the appropriate amount of compressed air to different parts of the automated system as needed.

Sequential Operations:

Integration of air compressors into automated systems enables sequential operations to be carried out efficiently. Compressed air can be used to control the timing and sequencing of different pneumatic components, ensuring that the automated system performs tasks in the desired order and with precise timing. This is particularly useful in manufacturing and assembly processes where precise coordination of pneumatic actuators is required.

Energy Efficiency:

Air compressors can contribute to energy-efficient automation systems. By incorporating energy-saving features such as Variable Speed Drive (VSD) technology, air compressors can adjust their power output according to the demand, reducing energy consumption during periods of low activity. Additionally, efficient control and regulation systems help optimize the use of compressed air, minimizing waste and improving overall energy efficiency.

Monitoring and Diagnostics:

Integration of air compressors into automated systems often includes monitoring and diagnostic capabilities. Sensors and monitoring devices can be installed to collect data on parameters such as air pressure, temperature, and system performance. This information can be used for real-time monitoring, preventive maintenance, and troubleshooting, ensuring the reliable operation of the automated system.

When integrating air compressors into automated systems, it is crucial to consider factors such as the specific requirements of the automation process, the desired air pressure and volume, and the compatibility of the compressor with the control and regulation system. Consulting with experts in automation and compressed air systems can help in designing an efficient and reliable integration.

In summary, air compressors can be seamlessly integrated into automated systems, providing the necessary compressed air to power and control pneumatic components, enabling sequential operations, and contributing to energy-efficient automation processes.

air compressor

How do you choose the right size of air compressor for your needs?

Choosing the right size of air compressor is essential to ensure optimal performance and efficiency for your specific needs. Here are some factors to consider when selecting the appropriate size:

1. Air Demand: Determine the air demand requirements of your applications. Calculate the total CFM (Cubic Feet per Minute) needed by considering the air consumption of all the pneumatic tools and equipment that will be operated simultaneously. Choose an air compressor with a CFM rating that meets or exceeds this total demand.

2. Pressure Requirements: Consider the required operating pressure for your applications. Check the PSI (Pounds per Square Inch) rating of the tools and equipment you will be using. Ensure that the air compressor you choose can deliver the necessary pressure consistently.

3. Duty Cycle: Evaluate the duty cycle of the air compressor. The duty cycle represents the percentage of time the compressor can operate within a given time period without overheating or experiencing performance issues. If you require continuous or heavy-duty operation, choose a compressor with a higher duty cycle.

4. Power Source: Determine the available power source at your location. Air compressors can be powered by electricity or gasoline engines. Ensure that the chosen compressor matches the available power supply and consider factors such as voltage, phase, and fuel requirements.

5. Portability: Assess the portability requirements of your applications. If you need to move the air compressor frequently or use it in different locations, consider a portable or wheeled compressor that is easy to transport.

6. Space and Noise Constraints: Consider the available space for installation and the noise restrictions in your working environment. Choose an air compressor that fits within the allocated space and meets any noise regulations or requirements.

7. Future Expansion: Anticipate any potential future expansions or increases in air demand. If you expect your air demand to grow over time, it may be wise to choose a slightly larger compressor to accommodate future needs and avoid the need for premature replacement.

8. Budget: Consider your budgetary constraints. Compare the prices of different air compressor models while ensuring that the chosen compressor meets your specific requirements. Keep in mind that investing in a higher-quality compressor may result in better performance, durability, and long-term cost savings.

By considering these factors and evaluating your specific needs, you can choose the right size of air compressor that will meet your air demand, pressure requirements, and operational preferences, ultimately ensuring efficient and reliable performance.

China high quality High Consistency All-in-One Screw Air Compressor for Laser Cutting Machine portable air compressor
editor by CX 2023-11-02

China OEM (ISO&CE) Save Power 40% Direct Drive Permanent Magnet VSD Screw Air Compressor Industrial Air Compressor Rotary Air Compressor lowes air compressor

Product Description

(ISO&CE)Save Power 40% Direct Drive Permanent Magnet VSD Screw Air Compressor Industrial Air Compressor Rotary Air Compressor

1. Photo & Features for our Twin Rotary screw air compressor :

2. Advantages for our ZheJiang Great Air Compressor CO.,ltd

Our company advantages	1. Over 60 years China professsinal manufacture for air compressor ,An ISO9000 company
	2.European standard,China made &factory directly supply
	3. Superior porformance &high efficiency with reasonable price
	4. Low power consumptions for more output
	5. Trouble free & cost saving
	6. Timely pre-sale and after-sale service
	7. Easy operatation &maintenance

3.Technical Parameters for Great Brand !!! AC Rotary Screw Air Compressor Industrial with Best Quality and Lower Price

Products range :

Motor power:5.5kw-630 kw/7.5hp-840hp , flow capacity:0.6-111 m³/min, pressure: 7-13 bar

Model

TKL-2F

TKL-3F

TKL-4F

TKL-5F

TKL-7F

TKL-11F

TKL-15F

TKL-18F

TKL-22F

TKL-30F

TKL-37F

TKL-45F/W

TKL-55F/W

TKL-75F/W

TKL-90F/W

Air displacemen/
Exhause pressure (m3/min/Mpa)

0.33/0.7

0.43/0.7

0.6/0.7

0.8/0.7

1.23/0.7

1.65/0.7

2.7/0.7

3.0/0.7

3.6/0.7

5.2/0.7

6.6/0.7

7.8/0.7

10.1/10.7

13.5/0.7

16.3/0.7

0.33/0.8

0.4/0.8

0.55/0.8

0.7/0.8

1.16/0.8

1.62/0.8

2.5/0.8

2.92/0.8

3.53/0.8

5.0/0.8

6.3/0.8

7.5/0.8

9.8/0.8

12.3/0.8

15.6/0.8

0.25/1.0

0.36/1.0

0.5/1.0

0.65/1.0

1.02/1.0

1.4/1.0

2.0/1.0

2.7/1.0

3.2/1.0

4.5/1.0

5.6/1.0

6.8/1.0

8.8/1.0

11.0/1.0

14.2/1.0

0.22/1.3

0.3/1.3

0.45/1.3

0.6/1.3

0.86/1.3

1.21/1.3

1.8/1.3

2.2/1.3

2.4/1.3

3.5/1.3

4.8/1.3

5.8/1.3

7.2/1.3

9.0/1.3

11.5/1.3

Power/ (Kw)

2.2

5.5

7.5

18.5

Ooltage (V/Hz)

380V/50Hz

Noise (±3,dBa)

Exhaust temprature

Wind cooling type <=Environmental temperature+13ºC, Water cooling type <=40ºC,

Outlet pipe size

1/2″

3/4″

1″

1 1/2″

DN50

Weight (Kg)

260

280

300

350

360

400

430

590

650

950

980

1050

1850

1900

2100

Dimensions (mm)

800*760*1102

800*760*
1102

950*760*1202

900*1000*1290

belt type 900*1000*1290

1500*950*1280

1600*1100*1430

1900*1150*1500

2000*1150*1680

strait type 1350*850*1257

Model

TKL-110
F/W

TKL-132
F/W

TKL-160
F/W

TKL-185
F/W

TKL-200
F/W

TKL-220
F/W

TKL-250
F/W

TKL-280
F/W

TKL-
315W

TKL-
355W

TKL-
400W

TKL-
450W

TKL-
500W

TKL-
560W

TKL-
630W

Air displacemen/
Exhause pressure (m3/min/Mpa)

20.4/0.7

24/0.7

27.8/0.7

32.5/0.7

35/0.7

40.7/0.7

45.3/0.7

51.5/0.7

57/0.7

68/0.7

73.6/0.7

83/0.7

90/10.7

101/0.7

111/0.7

20/0.8

23/0.8

27.1/0.8

30.5/0.8

33.3/0.8

38.2/0.8

43/0.8

50.5/0.8

55.5/0.8

66.2/0.8

71.4/0.8

82/0.8

89/0.8

100/0.8

110/0.8

17.8/1

21/1.0

25.2/1.0

27/1.0

30.6/1.0

34.5/1.0

38.1/1.0

43/1.0

50.5/1.0

55.6/1.0

62/1.0

73/1.0

80/1.0

86/1.0

95/1.0

14.5/1.3

18.1/1.3

21.2/1.3

23.6/1.3

26.3/1.3

29.8/1.3

35/1.3

38.3/1.3

42.1/1.3

46.5/1.3

52.5/1.3

60/1.3

68/1.3

Power/ (Kw)

110

132

160

185

200

220

250

280

315

355

400

450

500

560

630

Ooltage (V/Hz)

380V/50Hz

380-10000V/50Hz

Noise (±3,dBa)

Exhaust temprature

Wind cooling type <=Environmental temperature+13ºC, Water cooling type <=40ºC,

Outlet pipe size

DN80

DN100

DN125

DN150

DN200

Weight (Kg)

3300

3500

4000

4600

4700

5100

5500

7500

8300

8400

9000

9500

10000

Dimensions (mm)

F 2800*1540*1900

F 3150*1650*1900

F 3100*1940*2389

F 3400*2000*2330

4500*200*2462

4650*2340*2835

W 2400*1540*1900

W 2600*1700*1980

W 3200*1800*2125

4. Certificate :

5.Applications:

7. FAQ:
Q1: Are you factory or trade company?
A1: We are factory.
Q2: Warranty terms of your machine?
A2: One year warranty for the machine and technical support according to your needs.
Q3: Will you provide some spare parts of the machines?
A3: Yes, of course.
Q4: How long will you take to arrange production?
A4: 380V 50HZ we can delivery the goods within 20 days. Other voltage we will delivery within 30 days.
Q5: Can you accept OEM orders?
A5: Yes, with professional design team, OEM orders are highly welcome!

8. Contact:

Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Cylinder Position:	Vertical
Structure Type:	Closed Type
Installation Type:	Stationary Type
Type:	Twin-Screw Compressor

Customization:	Available \|

air compressor

How does variable speed drive technology improve air compressor efficiency?

1. Matching Air Demand:

2. Reduced Unloaded Running Time:

3. Soft Starting:

4. Energy Savings at Partial Load:

5. Elimination of On/Off Cycling:

6. Enhanced System Control:

air compressor

Can air compressors be integrated into automated systems?

Pneumatic Automation:

Control and Regulation:

Sequential Operations:

Energy Efficiency:

Monitoring and Diagnostics:

air compressor

Are there air compressors specifically designed for high-pressure applications?

Yes, there are air compressors specifically designed for high-pressure applications. These compressors are engineered to generate and deliver compressed air at significantly higher pressures than standard air compressors. Here are some key points about high-pressure air compressors:

1. Pressure Range: High-pressure air compressors are capable of producing compressed air at pressures typically ranging from 1000 to 5000 psi (pounds per square inch) or even higher. This is considerably higher than the typical range of 100 to 175 psi for standard air compressors.

2. Construction: High-pressure aircompressors feature robust construction and specialized components to withstand the higher pressures involved. They are designed with reinforced cylinders, pistons, valves, and seals that can handle the increased stress and prevent leaks or failures under high-pressure conditions.

3. Power: Generating high-pressure compressed air requires more power than standard compressors. High-pressure air compressors often have larger motors or engines to provide the necessary power to achieve the desired pressure levels.

4. Applications: High-pressure air compressors are utilized in various industries and applications where compressed air at elevated pressures is required. Some common applications include:

Industrial manufacturing processes that involve high-pressure air for operations such as air tools, pneumatic machinery, and equipment.
Gas and oil exploration and production, where high-pressure air is used for well drilling, well stimulation, and enhanced oil recovery techniques.
Scuba diving and underwater operations, where high-pressure air is used for breathing apparatus and underwater tools.
Aerospace and aviation industries, where high-pressure air is used for aircraft systems, testing, and pressurization.
Fire services and firefighting, where high-pressure air compressors are used to fill breathing air tanks for firefighters.

5. Safety Considerations: Working with high-pressure air requires adherence to strict safety protocols. Proper training, equipment, and maintenance are crucial to ensure the safe operation of high-pressure air compressors. It is important to follow manufacturer guidelines and industry standards for high-pressure applications.

When selecting a high-pressure air compressor, consider factors such as the desired pressure range, required flow rate, power source availability, and the specific application requirements. Consult with experts or manufacturers specializing in high-pressure compressed air systems to identify the most suitable compressor for your needs.

High-pressure air compressors offer the capability to meet the demands of specialized applications that require compressed air at elevated pressures. Their robust design and ability to deliver high-pressure air make them essential tools in various industries and sectors.

China OEM (ISO&CE) Save Power 40% Direct Drive Permanent Magnet VSD Screw Air Compressor Industrial Air Compressor Rotary Air Compressor lowes air compressor
editor by CX 2023-11-02

China high quality CHINAMFG 24L Industrial Portable Quiet Air Tank Oiless Air Compressor Manufacturer for Sale best air compressor

Product Description

Silent Oil Free Air Compressor
Model	WD065710808	WD065712415	WD065715571
Power input	600W/0.8HP	1100W/1.5HP	1500W/2.0HP
Rated voltage	220-240V~50Hz	220-240V~50Hz	220-240V~50Hz
Rated speed	2800/min	2800/min	2800/min
Tank volume	8L	24L	50L
Max.work pressure	7bar(100psi)	8bar(116psi)	8bar(116psi)
Air flow	50L/min	100L/min	120L/min
Air-refilled time	15s	22s	35s
Quantity/Carton	1pc	1pc	1pc
Net/Gross weight	12.2/13.2Kg	20/21Kg	28/29Kg
Carton size	420x215x450mm	580x285x585mm	760x345x640mm
CBM	0.046m3	0.097m3	0.168m3

Warranty:	1 Year
Lubrication Style:	Oil-free
Power Source:	Electricity
Type:	Piston
Condition:	New, New
Tank Volume:	24L

air compressor

Can air compressors be used for shipbuilding and maritime applications?

Air compressors are widely used in shipbuilding and maritime applications for a variety of tasks and operations. The maritime industry relies on compressed air for numerous essential functions. Here’s an overview of how air compressors are employed in shipbuilding and maritime applications:

1. Pneumatic Tools and Equipment:

Air compressors are extensively used to power pneumatic tools and equipment in shipbuilding and maritime operations. Pneumatic tools such as impact wrenches, drills, grinders, sanders, and chipping hammers require compressed air to function. The versatility and power provided by compressed air make it an ideal energy source for heavy-duty tasks, maintenance, and construction activities in shipyards and onboard vessels.

2. Painting and Surface Preparation:

Air compressors play a crucial role in painting and surface preparation during shipbuilding and maintenance. Compressed air is used to power air spray guns, sandblasting equipment, and other surface preparation tools. Compressed air provides the force necessary for efficient and uniform application of paints, coatings, and protective finishes, ensuring the durability and aesthetics of ship surfaces.

3. Pneumatic Actuation and Controls:

Air compressors are employed in pneumatic actuation and control systems onboard ships. Compressed air is used to operate pneumatic valves, actuators, and control devices that regulate the flow of fluids, control propulsion systems, and manage various shipboard processes. Pneumatic control systems offer reliability and safety advantages in maritime applications.

4. Air Start Systems:

In large marine engines, air compressors are used in air start systems. Compressed air is utilized to initiate the combustion process in the engine cylinders. The compressed air is injected into the cylinders to turn the engine’s crankshaft, enabling the ignition of fuel and starting the engine. Air start systems are commonly found in ship propulsion systems and power generation plants onboard vessels.

5. Pneumatic Conveying and Material Handling:

In shipbuilding and maritime operations, compressed air is used for pneumatic conveying and material handling. Compressed air is utilized to transport bulk materials, such as cement, sand, and grain, through pipelines or hoses. Pneumatic conveying systems enable efficient and controlled transfer of materials, facilitating construction, cargo loading, and unloading processes.

6. Air Conditioning and Ventilation:

Air compressors are involved in air conditioning and ventilation systems onboard ships. Compressed air powers air conditioning units, ventilation fans, and blowers, ensuring proper air circulation, cooling, and temperature control in various ship compartments, cabins, and machinery spaces. Compressed air-driven systems contribute to the comfort, safety, and operational efficiency of maritime environments.

These are just a few examples of how air compressors are utilized in shipbuilding and maritime applications. Compressed air’s versatility, reliability, and convenience make it an indispensable energy source for various tasks and systems in the maritime industry.

air compressor

Can air compressors be integrated into automated systems?

Pneumatic Automation:

Control and Regulation:

Sequential Operations:

Energy Efficiency:

Monitoring and Diagnostics:

air compressor

Are there air compressors specifically designed for high-pressure applications?

4. Applications: High-pressure air compressors are utilized in various industries and applications where compressed air at elevated pressures is required. Some common applications include:

Industrial manufacturing processes that involve high-pressure air for operations such as air tools, pneumatic machinery, and equipment.
Gas and oil exploration and production, where high-pressure air is used for well drilling, well stimulation, and enhanced oil recovery techniques.
Scuba diving and underwater operations, where high-pressure air is used for breathing apparatus and underwater tools.
Aerospace and aviation industries, where high-pressure air is used for aircraft systems, testing, and pressurization.
Fire services and firefighting, where high-pressure air compressors are used to fill breathing air tanks for firefighters.

China high quality CHINAMFG 24L Industrial Portable Quiet Air Tank Oiless Air Compressor Manufacturer for Sale best air compressor
editor by CX 2023-11-01

China factory Big Discount 8bar 15kw Small Rotary Electric Stationary Permanent Magnet Variable Frequency Screw Air Compressor LG15ez air compressor parts

Product Description

1.) Main engine: adopt the main engine with German exquisite manufacturing technology, and adopt the low pressure and high efficiency tooth shape with CHINAMFG efficiency, optimized flow channel design, large rotor, low speed, high efficiency and high reliability to provide a powerful heart for your compressor, so that you can achieve efficiency and energy saving at the same time.

2.) Equipment appearance design: vertical complete machine design and industrial modeling with independent patent technology, small size, reasonable layout, convenient maintenance and use, suitable for direct use on the production site, and small floor area.

3.) Internal circulation system: all internal lubrication and air system pipelines adopt leak-free sealing design conforming to the SEA standard of the United States, with excellent performance, which can completely eliminate oil, gas, water and other leakage problems.

4.) Advanced monitoring system: adopt the most advanced compressor monitoring design concept to enable customers to monitor the operation of the air compression system in real time.

5.) Pipeline system: the hard pipe design of American standard is adopted. Due to the large inner diameter of the conveying pipe and small flow resistance, the conveying rate of the hard pipe is usually much higher than that of the hose, and it is stable, with long service life, and free of maintenance for life.

6.) Mute design: adopt mute design, optimized sound absorption structure, preset large volume front air filter, smooth air flow, reduce noise and air flow loss to the lowest level in the industry.

Product Parameters

Model No.:	LG7EZ	LG11EZ	LG15EZ	LG22EZ		LG37EZ	LG55EZ	LG75EZ
Air displacement (m3/min):	1	1.7	2.3	3.4		6.1	10	12
Working pressure(bar) :	8	8	8	8		8	8	8
Compression stage :	Single
Motor Rotation(rpm):	2950
Voltage(V/P/Hz)	380/3/50
Motor power (kw):	7.5	11	15	22		37	55	75
Start method :	Y-△	Direct Start	Y-△
Driven method	Direct connect				Direct connect
Cooling way	Air cooled
Outlet valve size :	G3/4”	G3/4”	G1″	G1″		G1-1/2″	G2″	G2″
*Dimension(LWH* mm):	800520840	1571640865	13007501180	13008801250		16009701450	16009701450	175010301450
Weight(KG):	200	300	350	550		750	1300	1600

Detailed Photos

Component Features

Packaging & Shipping

Certifications

Company Profile

FAQ

Q1: Are you factory or trade company?
A1: We are factory. And we have ourselves trading company.

Q2: Warranty terms of your machine?
A2: One year warranty for the machine and technical support according to your needs.

Q3: Will you provide some spare parts of the machines?
A3: Yes, of course.

Q4: What about the voltage of products??Can they be customized?
A4: Yes, of course. The voltage can be customized according to your equirement.

Q5: How long will you take to arrange production?
A5: 380V 50HZ we can delivery the goods within 7-15 days. Other electricity or other color we will delivery within 20-30 days.

Q6: Can you accept OEM orders?
A6: Yes, with professional design team, OEM orders are highly welcome.

Q7 Which trade term can you accept?
A7: Available trade terms: FOB, CIF, CFR, EXW, CPT, etc.

After-sales Service:	24 Hours Online Service
Warranty:	1 Year
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	DC Power
Cylinder Position:	Horizontal

air compressor

How are air compressors used in the food and beverage industry?

Air compressors play a vital role in the food and beverage industry, providing a reliable source of compressed air for various applications. Here are some common uses of air compressors in this industry:

1. Packaging and Filling:

Air compressors are extensively used in packaging and filling operations in the food and beverage industry. Compressed air is utilized to power pneumatic systems that control the movement and operation of packaging machinery, such as filling machines, capping machines, labeling equipment, and sealing devices. The precise and controlled delivery of compressed air ensures accurate and efficient packaging of products.

2. Cleaning and Sanitization:

Air compressors are employed for cleaning and sanitization purposes in food and beverage processing facilities. Compressed air is used to operate air-powered cleaning equipment, such as air blowguns, air-operated vacuum systems, and air knives. It helps remove debris, dust, and contaminants from production lines, equipment, and hard-to-reach areas. Additionally, compressed air is used for drying surfaces after cleaning and for applying sanitizing agents.

3. Cooling and Refrigeration:

In the food and beverage industry, air compressors are utilized in cooling and refrigeration systems. Compressed air is used to drive air compressors in refrigeration units, enabling the circulation of refrigerants and maintaining optimal temperatures for food storage and preservation. The controlled airflow provided by the compressors facilitates efficient cooling and refrigeration processes.

4. Aeration and Mixing:

Air compressors are used for aeration and mixing applications in the food and beverage industry. Compressed air is introduced into processes such as fermentation, dough mixing, and wastewater treatment. It helps in promoting oxygen transfer, enhancing microbial activity, and facilitating proper mixing of ingredients or substances, contributing to the desired quality and consistency of food and beverage products.

5. Pneumatic Conveying:

In food processing plants, air compressors are employed for pneumatic conveying systems. Compressed air is used to transport bulk materials such as grains, powders, and ingredients through pipes or tubes. It enables the gentle and efficient movement of materials without the need for mechanical conveyors, reducing the risk of product damage or contamination.

6. Quality Control and Testing:

Air compressors are utilized in quality control and testing processes within the food and beverage industry. Compressed air is used for leak testing of packaging materials, containers, and seals to ensure product integrity. It is also employed for spraying air or gases during sensory analysis and flavor testing.

7. Air Agitation:

In certain food and beverage production processes, air compressors are used for air agitation. Compressed air is introduced into tanks, mixing vessels, or fermentation tanks to create turbulence and promote mixing or chemical reactions. It aids in achieving consistent product quality and uniform distribution of ingredients or additives.

It is important to note that air compressors used in the food and beverage industry must meet strict hygiene and safety standards. They may require specific filtration systems, oil-free operation, and compliance with food safety regulations to prevent contamination or product spoilage.

By utilizing air compressors effectively, the food and beverage industry can benefit from improved productivity, enhanced product quality, and efficient processing operations.

air compressor

Can air compressors be used for medical and dental applications?

Yes, air compressors can be used for various medical and dental applications. Compressed air is a reliable and versatile utility in healthcare settings, providing power for numerous devices and procedures. Here are some common applications of air compressors in medical and dental fields:

1. Dental Tools:

Air compressors power a wide range of dental tools and equipment, such as dental handpieces, air syringes, air scalers, and air abrasion devices. These tools rely on compressed air to generate the necessary force and airflow for effective dental procedures.

2. Medical Devices:

Compressed air is used in various medical devices and equipment. For example, ventilators and anesthesia machines utilize compressed air to deliver oxygen and other gases to patients. Nebulizers, used for respiratory treatments, also rely on compressed air to convert liquid medications into a fine mist for inhalation.

3. Laboratory Applications:

Air compressors are used in medical and dental laboratories for various purposes. They power laboratory instruments, such as air-driven centrifuges and sample preparation equipment. Compressed air is also used for pneumatic controls and automation systems in lab equipment.

4. Surgical Tools:

In surgical settings, compressed air is employed to power specialized surgical tools. High-speed air-driven surgical drills, saws, and bone-cutting instruments are commonly used in orthopedic and maxillofacial procedures. Compressed air ensures precise control and efficiency during surgical interventions.

5. Sterilization and Autoclaves:

Compressed air is essential for operating sterilization equipment and autoclaves. Autoclaves use steam generated by compressed air to sterilize medical instruments, equipment, and supplies. The pressurized steam provides effective disinfection and ensures compliance with rigorous hygiene standards.

6. Dental Air Compressors:

Specialized dental air compressors are designed specifically for dental applications. These compressors have features such as moisture separators, filters, and noise reduction mechanisms to meet the specific requirements of dental practices.

7. Air Quality Standards:

In medical and dental applications, maintaining air quality is crucial. Compressed air used in healthcare settings must meet specific purity standards. This often requires the use of air treatment systems, such as filters, dryers, and condensate management, to ensure the removal of contaminants and moisture.

8. Compliance and Regulations:

Medical and dental facilities must comply with applicable regulations and guidelines regarding the use of compressed air. These regulations may include requirements for air quality, maintenance and testing procedures, and documentation of system performance.

It is important to note that medical and dental applications have specific requirements and standards. Therefore, it is essential to choose air compressors and associated equipment that meet the necessary specifications and comply with industry regulations.

air compressor

What is the impact of tank size on air compressor performance?

The tank size of an air compressor plays a significant role in its performance and functionality. Here are the key impacts of tank size:

China factory Big Discount 8bar 15kw Small Rotary Electric Stationary Permanent Magnet Variable Frequency Screw Air Compressor LG15ez air compressor parts
editor by CX 2023-11-01