Tag Archives: sale air compressor

China Hot selling Air Dryer / Combined Air Dryer / Air Cooled Refrigerated Combined Air Dryer Compressor for Sale best air compressor

Product Description

Air Dryer / Combined air dryer / Air cooled refrigerated combined air dryer compressor for sale
 

Detailed Photos

(1) Air-cooled combined dryer

Technological Process of the Combined Low Dew Point Compressed Air Dryer

 

Symbol Name Symbol Name
1 Refrigerant Compressor 15 Air Pressure Gauge
2 Oil Separator 16 Heat Exchanger
3 Condenser 17 Pressure Relief Valve
4 Dryer Filter 18,19 Check Valve
5 Sight Lens 20,21 Check Valve(Heat Type)
6 Bulge Thermal Expansion Valve 22,23,24,25 Pneumatic Valve
7 Hot Gas Bypass Valve 26,29,30,33 Diffuser
8 Vaporizer 27,31 Air Pressure Gauge
9 Humidity Sensor 28,32 Adsorption Vessel
10 Evaporator 34,35,36,37 Pilot Solenoid Valve
11 Refrigerant
Low Pressure Gauge		 38 Muffler
12 Refrigerant
Low Pressure Gauge		 39 Flow Regulating Valve(Heatless Type)
13 High and Low Pressure Controller 40 Throttling Orifice Plate(Heat Type)
14 Gas Liquid Separator 41 Electical Heater(Heat Type)
       

 General Introduction: 
Commonly, there are 2 kinds of compressed air dryer: refrigerated compressed air dryer and regeneration adsorption one. The refrigerated compressed air dryer is quite energy-saving without any air loss, While it is limited by the dew point temperature. The regeneration adsorption compressed air dryer can reach a quiet low dew point, but it has the shortcoming of big air loss and high energy consumption.
The CHINAMFG combined low dew point compressed air dryer takes the maximum advantages of the above 2 kinds of dryers through reasonable pipeline connection and capacity matching, which ensure its economic operation and high quality of low dew point finished air.
 Operating Principle:
Firstly, the hot and wet compressed air from the compressor is heat exchange with dried cold compressed air in the heat exchanger. Then it will be cooled down to about 2ºC by evaporator. Under this pressure dew point, the majority of vapor water in the compressed air is eliminated and discharged. After these processes, the low temperature air goes into the heat exchanger to cool the high wet compressed air, at the same time, itself temperature goes up in order to prevent the condensation of dew on the surface of pipelines. Last, low moisture compressed air dryer goes into the adsorption vessel to be further dried  in order to get the good dew point.
 

(2) Water-Cooled Combined Type Air Dryer

Working condition and technical data
Maximum inlet air temperature:45ºC
Ambient temperature range:5-50ºC
Pressure range:0.6-1.0Mpa
Pressure dew point:-20ºC ~ -40ºC
Regeneration gas consumption:3-5%
Cooling mode: water cooling (industrial circulating cooling water)
Cooling water pressure range: 0.2-0.4mpa
Maximum cooling water inlet temperature: 38 ºC
Intake oil content: ≤ 0.1ppm
Power supply: 6-12nm 3 / min: AC 220 V / 50 Hz
15nm3 / min and above: AC 380V / 220V / 50Hz
Cycle: T = 40 (min)
Refrigerant: R22 (R407C / R134a optional)
Design condition: inlet temperature: 38 ºC
Ambient temperature: 38 ºC
Working pressure: 0.7MPa
Cooling water inlet temperature: 32 ºC
Pressure loss: ≤ 5% of design pressure
Note: the water-cooled equipment above 80 cubic CHINAMFG are split bare machines. Other special requirements are welcome to customize.

Product features

  1. Low dew point:The combined low dew point dryer can reach very low pressure dew point, which can reach below – 40 ºC in general, and – 70 ºC at least according to different user requirements;
  2. Low energy consumption: the regeneration gas consumption of combined low dew point dryer is only 3% – 5%, which greatly saves the compressed air consumption;
  3. It can provide compressed air with different dew points for different air consumption points;
  4. All the operation switches and display instruments of the combined low dew point compressed air dryer are concentrated on the panel of the box plate. The refrigeration type compressed air dryer and the adsorption regeneration compressed air dryer can operate independently or simultaneously with cold and suction according to the customer’s needs;
  5. The gas-liquid separator adopts the patented three-stage separation mode: direct collision separation + low-speed centrifugal separation + stainless steel wire mesh demisting separation. 99.9% of liquid water is separated from the cooled compressed air. The second evaporation of textile moisture can ensure the low dew point quality of finished gas.
  6. High quality switching valve, stable and reliable, can ensure the integrity of the working process and prolong the working life of components.
  7. The refrigeration compressor adopts CHINAMFG of Denmark, CHINAMFG of ZheJiang , CHINAMFG of Japan, CHINAMFG of Germany, CHINAMFG of Germany, CHINAMFG of France and other companies of fully closed or semi closed refrigeration compressor, which has stable operation, low noise, high cop, reliable performance and long power saving life;

 

Product Parameters

(1) Air-Cooled Combined Type Air Dryer specification
 

Model     
  Item

 Air capacity
(Nm3/min)		 Desiccant weight(kg) Air connector dia Refrigerant power
(HP)		 Air flow
(Nm3/h)		 Fan power(W) Voltage
(V)		 Dryer Net Weight
(kg)		 Length(mm) Wideth(mm) Height(mm)
SDZF-1 1.2 25 G1″ 1/2 745 1×50 220 400 1080 850 1460
SDZF-2 2.5 40 G1″ 1/2 745 1×50 220 440 1100 900 2050
SDZF-3 3.6 60 G1″ 3/4 1330 1×100 220 460 1200 1000 1808
SDZF-4.5 5 85 G1 1/2″ 1 2670 1×135 220 660 1290 1030 2263
SDZF-6 6.8 105 G1 1/2″ 1.5 4500 1×230 220 775 1500 1105 1931
SDZF-8 8.5 150 G2″ 2 5340 2×135 220 970 1500 1240 2016
SDZF-10 10.9 185 G2″ 2.5 5340 2×135 220 1120 1500 1240 2316
SDZF-12 12.8 185 G2″ 2.5 5340 2×135 220 1120 1500 1240 2316
SDZF-15 16 310 DN65 3 7600 2×190 380/220 1700 1960 1450 2342
SDZF-20 22 395 DN65 4 7600 2×190 380/220 1800 1980 1600 2408
SDZF-25 26.8 492 DN80 5 9000 2×230 380/220 2100 2270 1700 2460
SDZF-30 32 600 DN80 6 9000 2×230 380/220 2300 2420 1780 2506
SDZF-40 43.5 725 DN100 7 12500 2×420 380/220 2700 2100 2340 2673
SDZF-50 53 855 DN100 10 13500 3×230 380/220 2900 2100 2390 2687
SDZF-60 67 1005 DN125 12 18750 3×420 380/220 3350 2250 2600 2814
SDZF-80 90 1335 DN125 13.3 25000 4×420 380/220 4200 2640 2600 2866

 

 

 

Note:Design conditions: working pressure: 7bar, inlet temperature: 38ºC, pressure dew point: -20ºC

(2) Water-Cooled Combined Type Air Dryer
 

Product specifications

model Air capacity
(Nm3/min)		 Weight of desiccant(kg) Air nozzle diameter Diameter of cooling water pipe Cooling power
(HP)		 Cooling water flow
(Nm3/h)		 Voltage
(V)		 Equipment weight
(kg)		 L(mm) W(mm) H(mm)
SDZW-6 6.8 105 G1 1/2″ R1″ 1.5 1.2 220 760 1500 1160 1940
SDZW-8 8.5 150 G2″ R1″ 2 1.2 220 960 1500 1100 2016
SDZW-10 10.9 185 G2″ R1″ 2.5 1.6 220 1120 1500 1240 2316
SDZW-12 12.8 185 G2″ R1″ 2.5 1.8 220 1150 1500 1240 2316
SDZW-15 16 275 DN65 R1″ 3 2 380/220 1660 1960 1450 2196
SDZW-20 22 395 DN65 R1 1/2″ 4 3 380/220 1740 1970 1600 2475
SDZW-25 26.8 495 DN80 R1 1/2″ 5 3.6 380/220 2075 2030 1630 2505
SDZW-30 32 605 DN80 R1 1/2″ 6 4.6 380/220 2200 2240 1840 2519
SDZW-40 43.5 725 DN100 R1 1/2″ 7 5.6 380/220 2784 2360 1900 2637
SDZW-50 53 860 DN100 R1 1/2″ 10 7.2 380/220 3144 2400 2000 2638
SDZW-60 67 1005 DN125 R1 1/2″ 12 9.2 380/220 3361 2540 2100 2719
SDZW-80 90 1335 DN125 R1 1/2″ 13.3 10.8 380/220 4500 2640 2450 2818
SDZW-100 110 2155 DN150 R1 1/2″ 20 12.4 380/220 6550 2680 2670 2985
SDZW-120 130 2650 DN150 R2″ 25 14.6 380/220 7810 2820 2800 3041
SDZW-150 160 3205 DN200 R2″ 25 16.2 380/220 8500 3290 3130 3190
SDZW-200 210 3825 DN200 R2 1/2″ 40 18.6 380/220 9600 3350 3375 3309
SDZW-250 260 5260 DN250 R2 1/2″ 60 24.4 380/220 Detailed parameters and consultation with manufacturers
SDZW-300 315 6160 DN250 R3″ 70 30.5 380/220 Detailed parameters and consultation with manufacturers

 

Optional Accessories

  • Micro heat type
  • Dew point display
  • Dew point energy saving control
  • Special voltage
  • Environmental refrigerant
  • – 70 ºC dew point
  • Not limited to this

Company Profile

 

Certifications

 

Packaging & Shipping

 

FAQ

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Ok
Warranty: 1 Year
Flow: Cross Flow
Material Status: Bulk
Drying Medium: Air
Structure: All Kinds
Samples:
US$ 1000/Set
1 Set(Min.Order)

|
Request Sample

Customization:
Available

|

air compressor

What is the role of air compressors in power generation?

Air compressors play a significant role in power generation, supporting various operations and equipment within the industry. Here are some key roles of air compressors in power generation:

1. Combustion Air Supply:

Air compressors are used to supply compressed air for the combustion process in power generation. In fossil fuel power plants, such as coal-fired or natural gas power plants, compressed air is required to deliver a steady flow of air to the burners. The compressed air helps in the efficient combustion of fuel, enhancing the overall performance and energy output of the power plant.

2. Instrumentation and Control:

Air compressors are utilized for instrumentation and control systems in power generation facilities. Compressed air is used to operate pneumatic control valves, actuators, and other pneumatic devices that regulate the flow of steam, water, and gases within the power plant. The reliable and precise control provided by compressed air ensures efficient and safe operation of various processes and equipment.

3. Cooling and Ventilation:

In power generation, air compressors are involved in cooling and ventilation applications. Compressed air is used to drive air-operated cooling fans and blowers, providing adequate airflow for cooling critical components such as generators, transformers, and power electronics. The compressed air also assists in maintaining proper ventilation in control rooms, substations, and other enclosed spaces, helping to dissipate heat and ensure a comfortable working environment.

4. Cleaning and Maintenance:

Air compressors are employed for cleaning and maintenance tasks in power generation facilities. Compressed air is utilized to blow away dust, dirt, and debris from equipment, machinery, and electrical panels. It helps in maintaining the cleanliness and optimal performance of various components, reducing the risk of equipment failure and improving overall reliability.

5. Pneumatic Tools and Equipment:

In power generation plants, air compressors provide the necessary compressed air for operating pneumatic tools and equipment. These tools include impact wrenches, pneumatic drills, grinders, and sandblasting equipment, which are utilized for installation, maintenance, and repair tasks. The high-pressure air generated by compressors enables efficient and reliable operation of these tools, enhancing productivity and reducing manual effort.

6. Nitrogen Generation:

Sometimes, air compressors are used in power generation for nitrogen generation. Compressed air is passed through a nitrogen generator system, which separates nitrogen from other components of air, producing a high-purity nitrogen gas stream. Nitrogen is commonly used in power plant applications, such as purging systems, blanketing in transformers, and generator cooling, due to its inert properties and low moisture content.

7. Start-up and Emergency Systems:

Air compressors are an integral part of start-up and emergency systems in power generation. Compressed air is utilized to power pneumatic starters for gas turbines, providing the initial rotation needed to start the turbine. In emergency situations, compressed air is also used to actuate emergency shutdown valves, safety systems, and fire suppression equipment, ensuring the safe operation and protection of the power plant.

Overall, air compressors contribute to the efficient and reliable operation of power generation facilities, supporting combustion processes, control systems, cooling, cleaning, and various other applications critical to the power generation industry.

air compressor

What safety precautions should be taken when working with compressed air?

Working with compressed air requires adherence to certain safety precautions to prevent accidents and ensure the well-being of individuals involved. Here are some important safety measures to consider:

1. Personal Protective Equipment (PPE):

Wear appropriate PPE, including safety goggles or a face shield to protect eyes from flying debris or particles, hearing protection to reduce noise exposure, and gloves to safeguard hands from potential hazards.

2. Compressed Air Storage:

Avoid storing compressed air in containers that are not designed for this purpose, such as soda bottles or makeshift containers. Use approved and properly labeled air storage tanks or cylinders that can handle the pressure and are regularly inspected and maintained.

3. Pressure Regulation:

Ensure that the air pressure is regulated to a safe level suitable for the equipment and tools being used. High-pressure air streams can cause serious injuries, so it is important to follow the manufacturer’s recommendations and never exceed the maximum allowable pressure.

4. Air Hose Inspection:

Regularly inspect air hoses for signs of damage, such as cuts, abrasions, or leaks. Replace damaged hoses immediately to prevent potential accidents or loss of pressure.

5. Air Blowguns:

Exercise caution when using air blowguns. Never direct compressed air towards yourself or others, as it can cause eye injuries, hearing damage, or dislodge particles that may be harmful if inhaled. Always point blowguns away from people or any sensitive equipment or materials.

6. Air Tool Safety:

Follow proper operating procedures for pneumatic tools. Ensure that tools are in good working condition, and inspect them before each use. Use the appropriate accessories, such as safety guards or shields, to prevent accidental contact with moving parts.

7. Air Compressor Maintenance:

Maintain air compressors according to the manufacturer’s guidelines. Regularly check for leaks, clean or replace filters, and drain moisture from the system. Proper maintenance ensures the safe and efficient operation of the compressor.

8. Training and Education:

Provide adequate training and education to individuals working with compressed air. Ensure they understand the potential hazards, safe operating procedures, and emergency protocols. Encourage open communication regarding safety concerns and implement a culture of safety in the workplace.

9. Lockout/Tagout:

When performing maintenance or repairs on compressed air systems, follow lockout/tagout procedures to isolate the equipment from energy sources and prevent accidental startup. This ensures the safety of the individuals working on the system.

10. Proper Ventilation:

Ensure proper ventilation in enclosed areas where compressed air is used. Compressed air can displace oxygen, leading to a potential risk of asphyxiation. Adequate ventilation helps maintain a safe breathing environment.

By adhering to these safety precautions, individuals can minimize the risks associated with working with compressed air and create a safer work environment.

air compressor

In which industries are air compressors widely used?

Air compressors find extensive usage across various industries due to their versatility and ability to generate compressed air. Here are some industries where air compressors are widely employed:

1. Manufacturing: Air compressors are essential in manufacturing processes for powering pneumatic tools and equipment. They are used for tasks such as operating assembly lines, powering robotic machinery, running paint sprayers, and driving pneumatic actuators.

2. Construction: Air compressors play a crucial role in the construction industry. They power pneumatic tools like jackhammers, nail guns, impact wrenches, and concrete breakers. Compressed air is also used for concrete spraying, sandblasting, and operating air-powered lifts and hoists.

3. Automotive: Air compressors are widely used in automotive manufacturing and repair. They power air tools used in auto body shops, tire inflation equipment, pneumatic lifts, and air-operated brake systems. Compressed air is also utilized in vehicle painting and drying processes.

4. Oil and Gas: The oil and gas industry extensively relies on air compressors for various applications. They are used for pneumatic drilling, powering pneumatic tools in refineries and petrochemical plants, operating pneumatic valves and actuators, and providing instrument air for control systems.

5. Food and Beverage: Air compressors are employed in the food and beverage industry for tasks such as packaging, bottling, and sealing. They power pneumatic conveying systems, control air pressure in food processing equipment, and provide clean compressed air for food handling and storage.

6. Pharmaceutical and Healthcare: Air compressors find application in pharmaceutical manufacturing and healthcare facilities. They are used for operating medical equipment, such as ventilators and dental tools. Compressed air is also utilized in pharmaceutical processes, including tablet coating, fluid bed drying, and aseptic packaging.

7. Aerospace: The aerospace industry relies on air compressors for various applications, including aircraft maintenance and assembly. They power pneumatic tools for aircraft repair, provide compressed air for cleaning and pressurizing systems, and support ground operations, such as tire inflation and aircraft de-icing.

8. Mining: Air compressors are extensively used in the mining industry. They power pneumatic tools for drilling, rock blasting, and excavation. Compressed air is also utilized for ventilation, conveying materials, and operating underground equipment.

9. Energy and Utilities: Air compressors play a vital role in the energy and utilities sector. They are used in power generation plants for pneumatic control systems, instrument air, and operating pneumatic valves. Compressed air is also employed for cleaning and maintenance purposes.

These are just a few examples of the industries where air compressors are widely utilized. The versatility and reliability of air compressors make them indispensable in numerous applications across diverse sectors.

China Hot selling Air Dryer / Combined Air Dryer / Air Cooled Refrigerated Combined Air Dryer Compressor for Sale best air compressorChina Hot selling Air Dryer / Combined Air Dryer / Air Cooled Refrigerated Combined Air Dryer Compressor for Sale best air compressor
editor by CX 2023-12-25

China Custom Chinese CHINAMFG Factory Price Intelligent PLC Control Export Standard Electric Motor Powered Direct Screw Air Compressor with CE and ISO Certification air compressor for sale

Product Description

BEEST—-AIR COMPRESSOR&SOLUTION

Moair Energy Conservation Durable Two Stage Screw Air Compressor with Double Permanent Magnet Motor

1. Company background

ZheJiang CHINAMFG International Trade Co., Ltd. is the senior partner of HangZhou CHINAMFG Compressor Co., Ltd , we are committed to the sales and after-sales service of air compressors in Southeast Asia, and have stores in Indonesia.
We are the professional manufacturer of the air compressor products of various types including the permanent-magnet synchronous variable-frequency series,permanent-magnet synchronous low-pressure series,permanent-magnet sunchronous two-stage compressors series,etc.
More than 10 years of professional screw compressors manufacturing technology,bringing the international first-class permanent magnet synchronous drive and control technologies.

2. Product introduction
 

L series permanent magnet rotary screw air compressor 3-5 bar are specially developed for industries that need low air pressure operation such as textile, cement, glass and food. With a low pressure range from 3 bar to 5 bar, the power range of L series is from 37kw to 132kw and the air delivery of that is from 8.34m3/min to 85.82m3/min.
The main engine is a low pressure design developed by CHINAMFG instead of an ordinary one. When a low pressure compressor is equipped with a common main engine, the air will be largely compressed first and then released, which will lead to unnecessary high energy consumption. However, a professional low pressure main engine will save 10%-20% energy compared with common compressors.
The industrial rotary screw air compressors are equipped with motors with a protection degree of IP54 and inovance frequency inverter, which turn out to be effective, energy-saving, structure-compact and lower noise.

3.Core components

Motor 

  • More stable: no mechanical transmission troubles
    There is no gear shaft in the air compressor and the effective permanent magnet motor and the male rotor are directly connected on 1 shaft without gear drive, which can eliminate pitting of gear or hidden troubles of tooth fracture.
    Without shaft coupling, 2 integrated PM motors directly drive 2 airends of the air compressor, avoiding the hidden troubles of shaft coupling failure.
  • More energy-savings: the airend is always in a smooth running state
    The 2 stage 3 phase permanent magnet rotary gear screw air compressor of CHINAMFG is powered by 2 independent PM motors and 2 independent inverters, which is intelligently controlled such as keep the airend running at a best level-pressure point by controlling discharge pressure and interstage pressure under the circumstance of different rotary speed and different pressure. The best running speed of air compressor can be automatically calculated while running and then the compression ratio can be balanced by final match, which can keep the compressor in a best running state, thus obtaining the highest efficiency.
  • More effective: high-efficiency permanent magnet motor and no gear drive loss.
    With a motor of a high protection degree of IP54, it is more energy-saving and it can stay effective at low frequency and low speed.
  • More environment-friendly operation with lower noise
    No noise of motor bearings, gear meshing and coupling transmission.
  • More structure-compact
    The volume of PM motor is small and the structure is compact, which can save much space.

    4.Specifications and parameters

     
     

    Examples of comparison of low pressure compressor’s and common compressor’s working conditions in the low pressure state:
    When users’ actual need for pressure is 0.4MPa, however, if a 0.8MPa 1 was used in this case, the compressor will compress the air to 0.8MPa first and then reduce it to 0.4MPa by pressure-reducing valve or other ways. That is to say, the 0.8MPa energy consumption is taken by users.

    For example, the actual air delivery of 45kw/0.4MPa low pressure compressor of CHINAMFG is 10.84 m3min and the actual work is 44.8KW and the specific power is 4.13kw/m3. However, the specific power of common 45kw/0.8MPa compressor is 8.1kw/m3, according to the 2 level energy efficiency calculation. In this case, professional 0.4MPa low pressure compressor can save nearly 49% energy compared with common ones.

    5. Principle of energy-saving
     

    • Change the traditional induction motor with high-efficiency technology of permanent magnet rotary screw motor, thus reducing the consumption in transmission.
    • Powered by 2 independent PM motors and 2 independent inverters, the compressor is intelligently controlled such as keep the airend running at a best level-pressure point by controlling pressure of air flow and interstage pressure under the circumstance of different rotary speed and different pressure. The best running speed of compressor can be automatically calculated while running and then the compression ratio can be balanced by final match, which can keep the compressor in a best running state, thus obtaining the highest efficiency.
    • Because the gear ratio is fixed, point efficiency is emphasized in this case. That is to say, only with fixed rotary speed and rated pressure did it have the best specific power. When running in a state of variable speed and variable frequency, considering the fixed speed of gear, interstage pressure will not reach the best one. Rotational speed declining while energy consumption not declining at the same time, it is not suitable for running in variable speed and variable frequency state.

       

    /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

    After-sales Service: Online Service
    Warranty: One Year
    Lubrication Style: Lubricated
    Cooling System: Air Cooling
    Power Source: AC Power
    Cylinder Position: Horizontal

    air compressor

    How are air compressors utilized in the aerospace industry?

    Air compressors play a crucial role in various applications within the aerospace industry. They are utilized for a wide range of tasks that require compressed air or gas. Here are some key uses of air compressors in the aerospace industry:

    1. Aircraft Systems:

    Air compressors are used in aircraft systems to provide compressed air for various functions. They supply compressed air for pneumatic systems, such as landing gear operation, braking systems, wing flap control, and flight control surfaces. Compressed air is also utilized for starting aircraft engines and for cabin pressurization and air conditioning systems.

    2. Ground Support Equipment:

    Air compressors are employed in ground support equipment used in the aerospace industry. They provide compressed air for tasks such as inflating aircraft tires, operating pneumatic tools for maintenance and repair, and powering air-driven systems for fueling, lubrication, and hydraulic operations.

    3. Component Testing:

    Air compressors are utilized in component testing within the aerospace industry. They supply compressed air for testing and calibrating various aircraft components, such as valves, actuators, pressure sensors, pneumatic switches, and control systems. Compressed air is used to simulate operating conditions and evaluate the performance and reliability of these components.

    4. Airborne Systems:

    In certain aircraft, air compressors are employed for specific airborne systems. For example, in military aircraft, air compressors are used for air-to-air refueling systems, where compressed air is utilized to transfer fuel between aircraft in mid-air. Compressed air is also employed in aircraft de-icing systems, where it is used to inflate inflatable de-icing boots on the wing surfaces to remove ice accumulation during flight.

    5. Environmental Control Systems:

    Air compressors play a critical role in the environmental control systems of aircraft. They supply compressed air for air conditioning, ventilation, and pressurization systems, ensuring a comfortable and controlled environment inside the aircraft cabin. Compressed air is used to cool and circulate air, maintain desired cabin pressure, and control humidity levels.

    6. Engine Testing:

    In the aerospace industry, air compressors are utilized for engine testing purposes. They provide compressed air for engine test cells, where aircraft engines are tested for performance, efficiency, and durability. Compressed air is used to simulate different operating conditions and loads on the engine, allowing engineers to assess its performance and make necessary adjustments or improvements.

    7. Oxygen Systems:

    In aircraft, air compressors are involved in the production of medical-grade oxygen for onboard oxygen systems. Compressed air is passed through molecular sieve beds or other oxygen concentrator systems to separate oxygen from other components of air. The generated oxygen is then supplied to the onboard oxygen systems, ensuring a sufficient and continuous supply of breathable oxygen for passengers and crew at high altitudes.

    It is important to note that air compressors used in the aerospace industry must meet stringent quality and safety standards. They need to be reliable, efficient, and capable of operating under demanding conditions to ensure the safety and performance of aircraft systems.

    air compressor

    What safety precautions should be taken when working with compressed air?

    Working with compressed air requires adherence to certain safety precautions to prevent accidents and ensure the well-being of individuals involved. Here are some important safety measures to consider:

    1. Personal Protective Equipment (PPE):

    Wear appropriate PPE, including safety goggles or a face shield to protect eyes from flying debris or particles, hearing protection to reduce noise exposure, and gloves to safeguard hands from potential hazards.

    2. Compressed Air Storage:

    Avoid storing compressed air in containers that are not designed for this purpose, such as soda bottles or makeshift containers. Use approved and properly labeled air storage tanks or cylinders that can handle the pressure and are regularly inspected and maintained.

    3. Pressure Regulation:

    Ensure that the air pressure is regulated to a safe level suitable for the equipment and tools being used. High-pressure air streams can cause serious injuries, so it is important to follow the manufacturer’s recommendations and never exceed the maximum allowable pressure.

    4. Air Hose Inspection:

    Regularly inspect air hoses for signs of damage, such as cuts, abrasions, or leaks. Replace damaged hoses immediately to prevent potential accidents or loss of pressure.

    5. Air Blowguns:

    Exercise caution when using air blowguns. Never direct compressed air towards yourself or others, as it can cause eye injuries, hearing damage, or dislodge particles that may be harmful if inhaled. Always point blowguns away from people or any sensitive equipment or materials.

    6. Air Tool Safety:

    Follow proper operating procedures for pneumatic tools. Ensure that tools are in good working condition, and inspect them before each use. Use the appropriate accessories, such as safety guards or shields, to prevent accidental contact with moving parts.

    7. Air Compressor Maintenance:

    Maintain air compressors according to the manufacturer’s guidelines. Regularly check for leaks, clean or replace filters, and drain moisture from the system. Proper maintenance ensures the safe and efficient operation of the compressor.

    8. Training and Education:

    Provide adequate training and education to individuals working with compressed air. Ensure they understand the potential hazards, safe operating procedures, and emergency protocols. Encourage open communication regarding safety concerns and implement a culture of safety in the workplace.

    9. Lockout/Tagout:

    When performing maintenance or repairs on compressed air systems, follow lockout/tagout procedures to isolate the equipment from energy sources and prevent accidental startup. This ensures the safety of the individuals working on the system.

    10. Proper Ventilation:

    Ensure proper ventilation in enclosed areas where compressed air is used. Compressed air can displace oxygen, leading to a potential risk of asphyxiation. Adequate ventilation helps maintain a safe breathing environment.

    By adhering to these safety precautions, individuals can minimize the risks associated with working with compressed air and create a safer work environment.

    air compressor

    Can air compressors be used for automotive applications?

    Yes, air compressors can be used for various automotive applications and are commonly found in automotive repair shops, garages, and even in some vehicles. Here are some automotive applications where air compressors are frequently utilized:

    1. Tire Inflation: Air compressors are commonly used to inflate tires in automotive applications. They provide a convenient and efficient way to inflate tires to the recommended pressure, ensuring optimal tire performance, fuel efficiency, and safety.

    2. Air Tools: Air compressors power a wide range of pneumatic tools used in automotive repair and maintenance. These tools include impact wrenches, ratchet wrenches, air hammers, pneumatic drills, and sanders. Air-powered tools are favored for their high torque and power-to-weight ratio, making them suitable for heavy-duty automotive tasks.

    3. Spray Painting: Air compressors are commonly used in automotive painting applications. They power airbrushes and spray guns that are used to apply paint, primer, and clear coats. Air compressors provide the necessary air pressure to atomize the paint and deliver a smooth and even finish.

    4. Brake System Maintenance: Air compressors play a crucial role in maintaining and diagnosing automotive brake systems. They are used to pressurize the brake lines, allowing for proper bleeding of the system and detection of leaks or faults.

    5. Suspension Systems: Some automotive suspension systems, such as air suspensions, rely on air compressors to maintain the desired air pressure in the suspension components. The compressor inflates or deflates the suspension as needed to provide a comfortable ride and optimal handling.

    6. Cleaning and Dusting: Air compressors are used for cleaning automotive parts, blowing away dust and debris, and drying surfaces. They provide a high-pressure stream of air that effectively cleans hard-to-reach areas.

    7. Air Conditioning Systems: Air compressors are a key component in automotive air conditioning systems. They compress and circulate refrigerant, allowing the system to cool and dehumidify the air inside the vehicle.

    When using air compressors for automotive applications, it’s important to consider the specific requirements of the task at hand. Ensure that the air compressor has the necessary pressure and capacity to meet the demands of the application. Additionally, use appropriate air hoses, fittings, and tools that are compatible with the compressor’s output.

    Overall, air compressors are versatile and valuable tools in the automotive industry, providing efficient power sources for a wide range of applications, from tire inflation to powering pneumatic tools and supporting various automotive systems.

    China Custom Chinese CHINAMFG Factory Price Intelligent PLC Control Export Standard Electric Motor Powered Direct Screw Air Compressor with CE and ISO Certification air compressor for saleChina Custom Chinese CHINAMFG Factory Price Intelligent PLC Control Export Standard Electric Motor Powered Direct Screw Air Compressor with CE and ISO Certification air compressor for sale
    editor by CX 2023-12-23

    China Hot selling Heavy Truck Parts Air Conditioner Compressor AC 612600130496 612600130651 Zl50 Air Compressor Diesel for CHINAMFG Sale supplier

    Product Description

    Product Description

    engine parts air compressor 612600130177

    Weichai Spare Parts Air Compressor 612600130369

    Truck spare parts air compressor 612600130408

    Howo engine spare parts air compressor 612600130624

    trucks engine air compressor 61260013 0571

    sinotruck engine air compressor assy. VG157130001

    Heavy truck spare parts air pump VG1560130080A

     

    Packaging & Shipping

    Product Show

    Our products include : Cabin spare parts, Engine spare parts, Gearbox spare parts, Axle spare parts and Electrical spare parts. All parts you need are here.

    VGOil filter    VGFine filter element

    VG1540 0571 1 Primary filter element    VG260571253 Belt-water pump

    VGBelt-generator   WGControl cable

    WGCompressor    VG14040065 Cylinder head cover

    WGFan cover    VG156571571 Camshaft bush

    WGFRONT RIGHT MUDGUARD                             
    WGFRONT WHEEL FENDER REAR PART LEFT WITH COLOR

    WGFRONT WHEEL FENDER REAR PART RIGHT WITH COLOR

    WGLEFT WHEEL FENDER WITH COLOR

    WGRIGHT WHEEL FENDER WITH COLOR

    WGSTEP RIGHT                                          WGSTEP LEFT

    WGSHOCK ABSORBER                              AZSTABILIZER

    WGRUBBER STOP(STEEPLE-HEAD)          WGWASHER

    WGBUSH                                                       WGBUSH

    WGABOVE BRACKET LEFT                         WGABOVE BRACKET RIGHT

    WGSENSOR FOR CAB LOCK                      WGT-NOZZLE

    WGHOSE                                                       WGHYDRAULIC LOCK

    WGSHOCK ABSORBER

    Cabin parts:

    Bumper

    Panel

    Fender

    Front Cover

    Side Wing

    Head Light

    Rear View Mirror

    Sun Shade

    Hydraulic Lock

    Wiper

    Shock Absorber

    Fog Lamp

    WG162111011 Face Cover         WGBumper

    AZSun Visor            WG1642777571/20 Rear View Mirror

    AZShock Absorber   WGDoor Handle

    WGHydraulic Lock   WG9719720001/2 Head Lamp

    WG9719720005/6 Fog Lamp        WG9719810001/2 Rear Tail Lamp

    Chassis parts Brake Chamber Assembly
    Transmission parts Fast Gearbox, Transmission Shaft, Drive Shaft
    Engine parts Turbocharger, Piston, etc
    Cab parts Shock Absorber, 

     

    Company Profile

    HangZhou Xihu (West Lake) Dis. Trading Co., Ltd. is a heavy duty truck and spare parts supplier in China. we mainly deals with spare parts, trucks and construction machinery. Since the company was built, we pay attention to maintaining and developing the long-term cooperation relationship with the customers. 

    Our company covers an area of 10,000 square meters,including 2,000 square CHINAMFG business operation, 3,200 square CHINAMFG for maintenance and 2,000 square CHINAMFG truck parts warehouse. With a professional team nearly 100 workers with strong sales and maintenance abilities export products to more than 50 countries all over the world, such as Vietnam, Malaysia, Philippine, Thailand, Indonesia, Fiji, Nigeria, Algeria, Egypt, Tanzania, Ethiopia, Kenya, Mali, Congo, Sudan, Cameroon, Iran, Pakistan, Kazakhstan, Peru etc.

    We can provide full range of genuine spare parts with best price. For other brands, we have very good relationship with the manufacturers, which can make sure that we are able to provide the spare parts quickly and accurately. The spare parts is now being exported to Russia, Middle East, Africa, South America, Asia countries, etc. we will provide the best service and products, to satisfy the demands of our customers. Sticking to the principle of ” all for our customers”, we warmly welcome friends all over the world to visit and establish business relationship with us.

    Our Advantages

    1. After getting your order, we will take pictures of every parts for you. Even if you have 500 items.

    2. With CHINAMFG parts system,we can get the exact information according the chassis no and assembly nameplate , accurate rate reaches 99%.

    3. Our boss is very familiar with the working principle and maintenance of trucks. You are welcome to communicate with us.

    FAQ

    Q1: What is your payment terms?

    A: We accept T/T, WESTERN UNION, PAYPAL, T/T 30% as deposit, 70% before Delivery.

     

    Q2: What is the packing?

    A: Carton or wooden case, if you want to put your logo on the packing, we will do it after get your authorization letter.

     

    Q3: When can you deliver products after payment?

    A: By Express, Usually take 1-3 days; By Air, usually take 2-3 days; By Sea, usually take 5-15 days.

     

    Q4: What can you do to complete order perfectly?

    A: In the beginning, we will communicate with clients in detail to understand what they need. Before packing, we will check the products and send photos to clients. After confirmation, we will packing products well to avoid damage.

    Once we get tracking number, we will offer it to clients and keep contact with clients.

     

    Q5: Can you offer sample?

    A: Yes , we can offer sample, for small value products, only need to pay shipping cost.

    For High value products, you need to pay for it with freight.

    After-sales Service: Online Guidance
    Warranty: 3-6 Months
    Type: Engine
    Certification: ISO9001
    Brake System Parts: Brake
    Color: Black

    air compressor

    What is the impact of humidity on compressed air quality?

    Humidity can have a significant impact on the quality of compressed air. Compressed air systems often draw in ambient air, which contains moisture in the form of water vapor. When this air is compressed, the moisture becomes concentrated, leading to potential issues in the compressed air. Here’s an overview of the impact of humidity on compressed air quality:

    1. Corrosion:

    High humidity in compressed air can contribute to corrosion within the compressed air system. The moisture in the air can react with metal surfaces, leading to rust and corrosion in pipes, tanks, valves, and other components. Corrosion not only weakens the structural integrity of the system but also introduces contaminants into the compressed air, compromising its quality and potentially damaging downstream equipment.

    2. Contaminant Carryover:

    Humidity in compressed air can cause carryover of contaminants. Water droplets formed due to condensation can carry particulates, oil, and other impurities present in the air. These contaminants can then be transported along with the compressed air, leading to fouling of filters, clogging of pipelines, and potential damage to pneumatic tools, machinery, and processes.

    3. Decreased Efficiency of Pneumatic Systems:

    Excessive moisture in compressed air can reduce the efficiency of pneumatic systems. Water droplets can obstruct or block the flow of air, leading to decreased performance of pneumatic tools and equipment. Moisture can also cause problems in control valves, actuators, and other pneumatic devices, affecting their responsiveness and accuracy.

    4. Product Contamination:

    In industries where compressed air comes into direct contact with products or processes, high humidity can result in product contamination. Moisture in compressed air can mix with sensitive products, leading to quality issues, spoilage, or even health hazards in industries such as food and beverage, pharmaceuticals, and electronics manufacturing.

    5. Increased Maintenance Requirements:

    Humidity in compressed air can increase the maintenance requirements of a compressed air system. Moisture can accumulate in filters, separators, and other air treatment components, necessitating frequent replacement or cleaning. Excessive moisture can also lead to the growth of bacteria, fungus, and mold within the system, requiring additional cleaning and maintenance efforts.

    6. Adverse Effects on Instrumentation:

    Humidity can adversely affect instrumentation and control systems that rely on compressed air. Moisture can disrupt the accuracy and reliability of pressure sensors, flow meters, and other pneumatic instruments, leading to incorrect measurements and control signals.

    To mitigate the impact of humidity on compressed air quality, various air treatment equipment is employed, including air dryers, moisture separators, and filters. These devices help remove moisture from the compressed air, ensuring that the air supplied is dry and of high quality for the intended applications.

    air compressor

    Can air compressors be integrated into automated systems?

    Yes, air compressors can be integrated into automated systems, providing a reliable and versatile source of compressed air for various applications. Here’s a detailed explanation of how air compressors can be integrated into automated systems:

    Pneumatic Automation:

    Air compressors are commonly used in pneumatic automation systems, where compressed air is utilized to power and control automated machinery and equipment. Pneumatic systems rely on the controlled release of compressed air to generate linear or rotational motion, actuating valves, cylinders, and other pneumatic components. By integrating an air compressor into the system, a continuous supply of compressed air is available to power the automation process.

    Control and Regulation:

    In automated systems, air compressors are often connected to a control and regulation system to manage the compressed air supply. This system includes components such as pressure regulators, valves, and sensors to monitor and adjust the air pressure, flow, and distribution. The control system ensures that the air compressor operates within the desired parameters and provides the appropriate amount of compressed air to different parts of the automated system as needed.

    Sequential Operations:

    Integration of air compressors into automated systems enables sequential operations to be carried out efficiently. Compressed air can be used to control the timing and sequencing of different pneumatic components, ensuring that the automated system performs tasks in the desired order and with precise timing. This is particularly useful in manufacturing and assembly processes where precise coordination of pneumatic actuators is required.

    Energy Efficiency:

    Air compressors can contribute to energy-efficient automation systems. By incorporating energy-saving features such as Variable Speed Drive (VSD) technology, air compressors can adjust their power output according to the demand, reducing energy consumption during periods of low activity. Additionally, efficient control and regulation systems help optimize the use of compressed air, minimizing waste and improving overall energy efficiency.

    Monitoring and Diagnostics:

    Integration of air compressors into automated systems often includes monitoring and diagnostic capabilities. Sensors and monitoring devices can be installed to collect data on parameters such as air pressure, temperature, and system performance. This information can be used for real-time monitoring, preventive maintenance, and troubleshooting, ensuring the reliable operation of the automated system.

    When integrating air compressors into automated systems, it is crucial to consider factors such as the specific requirements of the automation process, the desired air pressure and volume, and the compatibility of the compressor with the control and regulation system. Consulting with experts in automation and compressed air systems can help in designing an efficient and reliable integration.

    In summary, air compressors can be seamlessly integrated into automated systems, providing the necessary compressed air to power and control pneumatic components, enabling sequential operations, and contributing to energy-efficient automation processes.

    air compressor

    What is the difference between a piston and rotary screw compressor?

    Piston compressors and rotary screw compressors are two common types of air compressors with distinct differences in their design and operation. Here’s a detailed explanation of the differences between these two compressor types:

    1. Operating Principle:

    • Piston Compressors: Piston compressors, also known as reciprocating compressors, use one or more pistons driven by a crankshaft to compress air. The piston moves up and down within a cylinder, creating a vacuum during the intake stroke and compressing the air during the compression stroke.
    • Rotary Screw Compressors: Rotary screw compressors utilize two intermeshing screws (rotors) to compress air. As the male and female screws rotate, the air is trapped between them and gradually compressed as it moves along the screw threads.

    2. Compression Method:

    • Piston Compressors: Piston compressors achieve compression through a positive displacement process. The air is drawn into the cylinder and compressed as the piston moves back and forth. The compression is intermittent, occurring in discrete cycles.
    • Rotary Screw Compressors: Rotary screw compressors also employ a positive displacement method. The compression is continuous as the rotating screws create a continuous flow of air and compress it gradually as it moves along the screw threads.

    3. Efficiency:

    • Piston Compressors: Piston compressors are known for their high efficiency at lower flow rates and higher pressures. They are well-suited for applications that require intermittent or variable air demand.
    • Rotary Screw Compressors: Rotary screw compressors are highly efficient for continuous operation and are designed to handle higher flow rates. They are often used in applications with a constant or steady air demand.

    4. Noise Level:

    • Piston Compressors: Piston compressors tend to generate more noise during operation due to the reciprocating motion of the pistons and valves.
    • Rotary Screw Compressors: Rotary screw compressors are generally quieter in operation compared to piston compressors. The smooth rotation of the screws contributes to reduced noise levels.

    5. Maintenance:

    • Piston Compressors: Piston compressors typically require more frequent maintenance due to the higher number of moving parts, such as pistons, valves, and rings.
    • Rotary Screw Compressors: Rotary screw compressors have fewer moving parts, resulting in lower maintenance requirements. They often have longer service intervals and can operate continuously for extended periods without significant maintenance.

    6. Size and Portability:

    • Piston Compressors: Piston compressors are available in both smaller portable models and larger stationary units. Portable piston compressors are commonly used in construction, automotive, and DIY applications.
    • Rotary Screw Compressors: Rotary screw compressors are typically larger and more suitable for stationary installations in industrial and commercial settings. They are less commonly used in portable applications.

    These are some of the key differences between piston compressors and rotary screw compressors. The choice between the two depends on factors such as required flow rate, pressure, duty cycle, efficiency, noise level, maintenance needs, and specific application requirements.

    China Hot selling Heavy Truck Parts Air Conditioner Compressor AC 612600130496 612600130651 Zl50 Air Compressor Diesel for CHINAMFG Sale supplier China Hot selling Heavy Truck Parts Air Conditioner Compressor AC 612600130496 612600130651 Zl50 Air Compressor Diesel for CHINAMFG Sale supplier
    editor by CX 2023-12-06

    China manufacturer Heavy Duty Offshore/ Onshore Skid Mounted Explosion Proof ATEX Certified Zone 2 Stationary Diesel Engine Direct Driven Rotary Screw Air Compressor for Sale air compressor portable

    Product Description

     

    DENAIR hot sale series diesel portable air compressors
    Model Machine Diesel Engine
    Free Air Delivery Normal Working Dimensions Weight  Manufacturer  Model Rated
     Pressure (without towbar)         power
      m3/min CFM bar(g) psig L*W*H(mm) kg KW
    DACY-3.2/8 3.40  120 8 116 2263*1590*1543 9, China
    Our factory is located in No. 366, YangzhuangBang Street, Pingxing Rd., Xindai Town, HangZhou, ZHangZhoug Province, China

    Q3: Warranty terms of your machine? 
    A3: Two years warranty for the machine and technical support according to your needs.

    Q4: Will you provide some spare parts of the machines? 
    A4: Yes, of course.

    Q5: How long will you take to arrange production? 
    A5: 380V 50HZ we can delivery the goods within 10 days. Other electricity or other color we will delivery within 22 days

    Q6: Can you accept OEM orders? 
    A6: Yes, with professional design team, OEM orders are highly welcome.
     

    Lubrication Style: Lubricated
    Cooling System: Air Cooling and Water Cooling
    Power Source: Diesel Engine
    Cylinder Position: Vertical
    Structure Type: Closed Type
    Installation Type: Movable Type
    Customization:
    Available

    |

    air compressor

    Are there special considerations for air compressor installations in remote areas?

    Yes, there are several special considerations to take into account when installing air compressors in remote areas. These areas often lack access to infrastructure and services readily available in urban or well-developed regions. Here are some key considerations:

    1. Power Source:

    Remote areas may have limited or unreliable access to electricity. It is crucial to assess the availability and reliability of the power source for operating the air compressor. In some cases, alternative power sources such as diesel generators or solar panels may need to be considered to ensure a consistent and uninterrupted power supply.

    2. Environmental Conditions:

    Remote areas can present harsh environmental conditions that can impact the performance and durability of air compressors. Extreme temperatures, high humidity, dust, and corrosive environments may require the selection of air compressors specifically designed to withstand these conditions. Adequate protection, insulation, and ventilation must be considered to prevent damage and ensure optimal operation.

    3. Accessibility and Transport:

    Transporting air compressors to remote areas may pose logistical challenges. The size, weight, and portability of the equipment should be evaluated to ensure it can be transported efficiently to the installation site. Additionally, the availability of suitable transportation infrastructure, such as roads or air transportation, needs to be considered to facilitate the delivery and installation process.

    4. Maintenance and Service:

    In remote areas, access to maintenance and service providers may be limited. It is important to consider the availability of trained technicians and spare parts for the specific air compressor model. Adequate planning for routine maintenance, repairs, and troubleshooting should be in place to minimize downtime and ensure the longevity of the equipment.

    5. Fuel and Lubricants:

    For air compressors that require fuel or lubricants, ensuring a consistent and reliable supply can be challenging in remote areas. It is necessary to assess the availability and accessibility of fuel or lubricant sources and plan for their storage and replenishment. In some cases, alternative or renewable fuel options may need to be considered.

    6. Noise and Environmental Impact:

    Remote areas are often characterized by their natural beauty and tranquility. Minimizing noise levels and environmental impact should be a consideration when installing air compressors. Selecting models with low noise emissions and implementing appropriate noise reduction measures can help mitigate disturbances to the surrounding environment and wildlife.

    7. Communication and Remote Monitoring:

    Given the remote location, establishing reliable communication channels and remote monitoring capabilities can be essential for effective operation and maintenance. Remote monitoring systems can provide real-time data on the performance and status of the air compressor, enabling proactive maintenance and troubleshooting.

    By addressing these special considerations, air compressor installations in remote areas can be optimized for reliable operation, efficiency, and longevity.

    air compressor

    How does the horsepower of an air compressor affect its capabilities?

    The horsepower of an air compressor is a crucial factor that directly impacts its capabilities and performance. Here’s a closer look at how the horsepower rating affects an air compressor:

    Power Output:

    The horsepower rating of an air compressor indicates its power output or the rate at which it can perform work. Generally, a higher horsepower rating translates to a greater power output, allowing the air compressor to deliver more compressed air per unit of time. This increased power output enables the compressor to operate pneumatic tools and equipment that require higher air pressure or greater airflow.

    Air Pressure:

    The horsepower of an air compressor is directly related to the air pressure it can generate. Air compressors with higher horsepower ratings have the capacity to produce higher air pressures. This is particularly important when operating tools or machinery that require specific air pressure levels to function optimally. For example, heavy-duty pneumatic tools like jackhammers or impact wrenches may require higher air pressure to deliver the necessary force.

    Air Volume:

    In addition to air pressure, the horsepower of an air compressor also affects the air volume or airflow it can provide. Higher horsepower compressors can deliver greater volumes of compressed air, measured in cubic feet per minute (CFM). This increased airflow is beneficial when using pneumatic tools that require a continuous supply of compressed air, such as paint sprayers or sandblasters.

    Duty Cycle:

    The horsepower rating of an air compressor can also influence its duty cycle. The duty cycle refers to the amount of time an air compressor can operate continuously before it needs to rest and cool down. Higher horsepower compressors often have larger and more robust components, allowing them to handle heavier workloads and operate for longer periods without overheating. This is particularly important in demanding applications where continuous and uninterrupted operation is required.

    Size and Portability:

    It’s worth noting that the horsepower rating can also affect the physical size and portability of an air compressor. Higher horsepower compressors tend to be larger and heavier due to the need for more substantial motors and components to generate the increased power output. This can impact the ease of transportation and maneuverability, especially in portable or mobile applications.

    When selecting an air compressor, it is essential to consider the specific requirements of your intended applications. Factors such as desired air pressure, airflow, duty cycle, and portability should be taken into account. It’s important to choose an air compressor with a horsepower rating that aligns with the demands of the tools and equipment you plan to operate, ensuring optimal performance and efficiency.

    Consulting the manufacturer’s specifications and guidelines can provide valuable information on how the horsepower rating of an air compressor corresponds to its capabilities and suitability for different tasks.

    air compressor

    What is the role of air compressor tanks?

    Air compressor tanks, also known as receiver tanks or air receivers, play a crucial role in the operation of air compressor systems. They serve several important functions:

    1. Storage and Pressure Regulation: The primary role of an air compressor tank is to store compressed air. As the compressor pumps air into the tank, it accumulates and pressurizes the air. The tank acts as a reservoir, allowing the compressor to operate intermittently while providing a steady supply of compressed air during periods of high demand. It helps regulate and stabilize the pressure in the system, reducing pressure fluctuations and ensuring a consistent supply of air.

    2. Condensation and Moisture Separation: Compressed air contains moisture, which can condense as the air cools down inside the tank. Air compressor tanks are equipped with moisture separators or drain valves to collect and remove this condensed moisture. The tank provides a space for the moisture to settle, allowing it to be drained out periodically. This helps prevent moisture-related issues such as corrosion, contamination, and damage to downstream equipment.

    3. Heat Dissipation: During compression, air temperature increases. The air compressor tank provides a larger surface area for the compressed air to cool down and dissipate heat. This helps prevent overheating of the compressor and ensures efficient operation.

    4. Pressure Surge Mitigation: Air compressor tanks act as buffers to absorb pressure surges or pulsations that may occur during compressor operation. These surges can be caused by variations in demand, sudden changes in airflow, or the cyclic nature of reciprocating compressors. The tank absorbs these pressure fluctuations, reducing stress on the compressor and other components, and providing a more stable and consistent supply of compressed air.

    5. Energy Efficiency: Air compressor tanks contribute to energy efficiency by reducing the need for the compressor to run continuously. The compressor can fill the tank during periods of low demand and then shut off when the desired pressure is reached. This allows the compressor to operate in shorter cycles, reducing energy consumption and minimizing wear and tear on the compressor motor.

    6. Emergency Air Supply: In the event of a power outage or compressor failure, the stored compressed air in the tank can serve as an emergency air supply. This can provide temporary air for critical operations, allowing time for maintenance or repairs to be carried out without disrupting the overall workflow.

    Overall, air compressor tanks provide storage, pressure regulation, moisture separation, heat dissipation, pressure surge mitigation, energy efficiency, and emergency backup capabilities. They are vital components that enhance the performance, reliability, and longevity of air compressor systems in various industrial, commercial, and personal applications.

    China manufacturer Heavy Duty Offshore/ Onshore Skid Mounted Explosion Proof ATEX Certified Zone 2 Stationary Diesel Engine Direct Driven Rotary Screw Air Compressor for Sale air compressor portableChina manufacturer Heavy Duty Offshore/ Onshore Skid Mounted Explosion Proof ATEX Certified Zone 2 Stationary Diesel Engine Direct Driven Rotary Screw Air Compressor for Sale air compressor portable
    editor by CX 2023-11-10

    China wholesaler 380V 50Hz 3phase 7.5kw 10HP Mini Screw Air Compressor in Stock Energy Saving Type VSD Screw Air Compressor 75 Kw VSD Air Compressor Compressor Screw air compressor for sale

    Product Description

    VSD screw air compressor

    ♦ Intelligent Touch-Screen Design

    ♦ Direct  Driver

    ♦ Oil Gas Separator

    ♦ Oil Filter

    ♦ Air Filter 

    ♦ Stainless Steel

    ♦ Piping Design

    Product features
    One shaft type structure
    1. Permanent magnet motor and airend use the embedded integrated Shaft connecting structure, more compact, 100% transmission Efficiency.
    2. No motor bearings, eliminating the motor bearing fault points. Different speeds, permanent magnet
     
     
    motor with high efficiency, Remarkable energy-saving effect
    1. At rated speed point, permanent magnet motor efficiency is higher Than ordinary motors.
    2. Under low motor speed, permanent magnet motor can still keep high Motor efficiency. If the gas consumption less, it still keeps extremely High efficiency. Compared with common frequency conversion
    3: Motor, the motor efficiency appears obvious gap and the air Compressor has effective energy saving
    It has the integrated structure, configuration of high efficiency Permanent magnet motor, small size, saving space, easy disassembly. Deloying efficient permanent magnet variable frequency controllor, it Small volume, low noise Can change the speed of the permanent magnet motor according to The exhaust volume, it will achieve lower operation noise than ordinary Ones.
    4. Permanent magnet motor has high performance NdFeB permanent Magnet, 120 º Cwithout loss of excitation, and service life of over 15 Years.
    5. Stator coil adopts special inverter corona resistant enamelled wire. Insulation performance and longer service life.
    6. Realizing soft start, the motor current will not exceed the full load Current during operation, and greatly reduce the impact on network Equipment, no damage to electrical equipment.OSG-EZV series permanent magnet compressor Stable operation.

    Energy-saving advantages:
    a. Permanent magnet motor has high performance NdFeB permanent Magnet, 120 º Cwithout loss of excitation, and service life of over 15 Years.
    b. Stator coil adopts special inverter corona resistant enamelled wire. Insulation performance and longer service life.
    c. Realizing soft start, the motor current will not exceed the full load Current during operation, and greatly reduce the impact on network Equipment, no damage to electrical equipment.OSG-EZV series permanent magnet compressor
    Energy-saving advantages:
     
    Condition energy saving
    1: The permanent magnet motor remains high efficiency at low speeds, ensuring Obvious energy-saving advantages in small air volume.
    2: Frequency range from 0%-100% (common conversion from 60%-100%)
    3: Compared with the fixed speed compressor, energy saving 22%-40%
    4: Compared with the common inverter compressor, energy saving 5%-15%
    5: System volume fluctuations larger, then energy-saving effect more obviously.
    6: Energy saving system of unloading (inverter):
    According to the stationary air compressors in gas consumption fluctuation, it has the unloading time, then the air compressor idling but also need 45% of the Electricity, but the permanent-magnet frequency air compressor will control for Inverter, no unloading and no waste. If the air compressor units become larger,
    Energy saves more. Save the wasted electric energy by pressure control bandwidth (energy saving):
    Fixed compressor must set a minimum control pressure for the 1Barg band (i. E. Air Compressor limits) to avoid the impact on the unit and the power grid. Several Machines must use together with a pressure gradient, more wide pressure, while the OSG permanent-magnet variable-frequency Air compressor series is inverter control,Unlimited stop, no need to set pressure, but a pressure point on the line. The pressureOf each 0.14Barg bandwidth, the system can save energy 1%.
     
    Energy saving startup (inverter):
    Air compressor’ s starting current is 3-6 times of the rated current, the frequently Start will waste a lot of energy, and frequency conversion type has no frequent Starting and stopping, but soft start. The maximum current does not exceed the Rated working current, no energy waste. At the same time also greatly reduce the Impact on network equipment, and no damage to electrical equipment OSG company has obtained a compressor production license(certificate NO: XK06-571-0571), has obtained a quality systemCertificate and general machinery certificate. Product design,Manufacturing processes are strict in accordance with ISO9001: 2008 quality system standards

     

    Model Pressure
    (mpa)    		 Displacement
    (m³/min)    		 Power
    (kw)    		 Dimension
    (mm)    		 Weight
    (kg)    		 Outlet Size
    VSD-0.7/7.5 0.7  1.20  7.5 840*620*850 450 G3/4″
    VSD-0.8/7.5 0.8  1.10 
    VSD-1.0/7.5 1.0  0.95 
    VSD-1.3/7.5 1.3  0.80 
    VSD-0.7/11 0.7  1.70  11 1150*750*1571 500 G1″
    VSD-0.8/11 0.8  1.60 
    VSD-1.0/11 1.0  1.40 
    VSD-1.3/11 1.3  1.20 
    VSD-0.7/15 0.7  2.40  15 1150*750*1571 550 G1″
    VSD-0.8/15 0.8  2.20 
    VSD-1.0/15 1.0  2.00 
    VSD-1.3/15 1.3  1.70 
    VSD-0.7/22 0.7  3.80  22 1300*850*1140 620 Rp1 1/4″
    VSD-0.8/22 0.8  3.50 
    VSD-1.0/22 1.0  3.20 
    VSD-1.3/22 1.3  2.90 
    VSD-0.7/37 0.7  6.40  37 1500**950*1230 1571 Rp1 1/2″
    VSD-0.8/37 0.8  6.10 
    VSD-1.0/37 1.0  5.70 
    VSD-1.3/37 1.3  5.00 
    VSD-0.7/45 0.7  8.00  45 1500**950*1230 1050 Rp1 1/2″
    VSD-0.8/45 0.8  7.70 
    VSD-1.0/45 1.0  7.00 
    VSD-1.3/45 1.3  5.80 
    VSD-0.7/55 0.7  10.50  55 1800*1250*1600 1500 Rp2″
    VSD-0.8/55 0.8  9.80 
    VSD-1.0/55 1.0  8.70 
    VSD-1.3/55 1.3  7.60 
    VSD-0.7/75 0.7  13.60  75 1950*1250*1650 1600 Rp2″
    VSD-0.8/75 0.8  13.30 
    VSD-1.0/75 1.0  11.60 
    VSD-1.3/75 1.3  9.80 
    VSD-0.7/90 0.7  16.30  90 2571*1250*1650 1800 DN65
    VSD-0.8/90 0.8  16.00 
    VSD-1.0/90 1.0  14.60 
    VSD-1.3/90 1.3  12.30 
    VSD-0.7/110 0.7  20.30  110 2460*1500*1800 4000 DN65
    VSD-0.8/110 0.8  19.40 
    VSD-1.0/110 1.0  17.30 
    VSD-1.3/110 1.3  14.60 
    VSD-0.7/132 0.7  24.00  132 2460*1500*1800 4500 DN65
    VSD-0.8/132 0.8  23.00 
    VSD-1.0/132 1.0  20.00 
    VSD-1.3/132 1.3  18.00 
    VSD-0.7/160 0.7  28.00  160 2580*1600*1980 4800 DN65
    VSD-0.8/160 0.8  26.50 
    VSD-1.0/160 1.0  22.50 
    VSD-1.3/160 1.3  20.10 
    VSD-0.7/185 0.7  32.50  185 2800*1700*2030 5200 DN65
    VSD-0.8/185 0.8  31.00 
    VSD-1.0/185 1.0  28.00 
    VSD-1.3/185 1.3  25.10 
    VSD-0.7/250 0.7  43.50  250 3400*2000*2100 6200 DN100
    VSD-0.8/250 0.8  42.00 
    VSD-1.0/250 1.0  38.10 
    VSD-1.3/250 1.3  34.60 

     ZheJiang CHINAMFG Gas Compressor Manufacturing Co.,Ltd. founded in 2005, is a leading high technology of machine and equipment manufacturer integrating the design, R&D, production, sales and service for air compressors & Mining Equipment. Adopting advanced technology, design concept and quality control, and we are able to provide customized products to meet customers’ OEM needs.
    Our company has more than 520 employees, including 86 senior technicians and professional engineers. Our technical team provides our customers with professional air system solutions. With the total 15000 square meters of the facility, 4 modern advanced production lines are built up to ensure production capacity to meet customer requirements.
    Our company has been awarded the honorary title of “ZheJiang high-tech enterprise” and our products enjoy high honors in the industry. Our company has the ISO9001 certification and was awarded the qualification certificate of equipment through military contracts in 2018.
    We offer the following products and services:
    1. Screw air compressor
        1.1 Oil-free screw air compressor
        1.2 Oil-injected air compressor
    2. Reciprocating piston air compressor
        2.1 Piston air compressor
        2.2 Oil-free piston air compressor
        2.3 Piston medium & high-pressure air compressor
    3.Portable air compressor & Mining Equipment
        3.1 Diesel or Electric portable screw air compressor
        3.2 Air Pick, Rock Drill, DTH Drilling Rig, Crawler Drilling Rig
    4. Air compressor accessories
        4.1 CHINAMFG or Adsorption compressed air drier
        4.2 Compressed air filter or tank
        4.3 Lubrication oil
    We have a complete system of after-sales service and quality assurance. The company’s material purchase, inspection, manufacturing, installation, and testing are strictly in accordance with the ISO procedures. which will ensure each compressor has reliable quality and has a complete record to trace, if needed.
    Q: Do you test all your goods before delivery?
    A: Yes, we have 100% test before delivery.

    Q: How can we start order with your factory?
    A: First, leave us an inquiry and advise which item you’re interested, and then we will contact you in 24 hours. You’re so kind if provide all detailed information, will better for us to know exactly what you need.

    Q: What are your MOQ?
    A: Different products have different MOQ, most is 1 set.

    Q: What is your terms of payment?
    A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages.

    Q: How about your delivery time?
    A: Generally, it will take 90 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

    Q: Do you a trade company or real factory?
    A: We are 100% factory; we located in ZheJiang city, China.

    After-sales Service: Online Support
    Warranty: 1 Years
    Lubrication Style: Lubricated
    Cooling System: Air Cooling
    Power Source: AC Power
    Structure Type: Closed Type
    Samples:
    US$ 1500/Piece
    1 Piece(Min.Order)

    |
    Request Sample

    Customization:
    Available

    |

    air compressor

    How does variable speed drive technology improve air compressor efficiency?

    Variable Speed Drive (VSD) technology improves air compressor efficiency by allowing the compressor to adjust its motor speed to match the compressed air demand. This technology offers several benefits that contribute to energy savings and enhanced overall system efficiency. Here’s how VSD technology improves air compressor efficiency:

    1. Matching Air Demand:

    Air compressors equipped with VSD technology can vary the motor speed to precisely match the required compressed air output. Traditional fixed-speed compressors operate at a constant speed regardless of the actual demand, leading to energy wastage during periods of lower air demand. VSD compressors, on the other hand, ramp up or down the motor speed to deliver the necessary amount of compressed air, ensuring optimal energy utilization.

    2. Reduced Unloaded Running Time:

    Fixed-speed compressors often run unloaded during periods of low demand, where they continue to consume energy without producing compressed air. VSD technology eliminates or significantly reduces this unloaded running time by adjusting the motor speed to closely follow the air demand. As a result, VSD compressors minimize energy wastage during idle periods, leading to improved efficiency.

    3. Soft Starting:

    Traditional fixed-speed compressors experience high inrush currents during startup, which can strain the electrical system and cause voltage dips. VSD compressors utilize soft starting capabilities, gradually ramping up the motor speed instead of instantly reaching full speed. This soft starting feature reduces mechanical and electrical stress, ensuring a smooth and controlled startup, and minimizing energy spikes.

    4. Energy Savings at Partial Load:

    In many applications, compressed air demand varies throughout the day or during different production cycles. VSD compressors excel in such scenarios by operating at lower speeds during periods of lower demand. Since power consumption is proportional to motor speed, running the compressor at reduced speeds significantly reduces energy consumption compared to fixed-speed compressors that operate at a constant speed regardless of the demand.

    5. Elimination of On/Off Cycling:

    Fixed-speed compressors often use on/off cycling to adjust the compressed air output. This cycling can result in frequent starts and stops, which consume more energy and cause mechanical wear. VSD compressors eliminate the need for on/off cycling by continuously adjusting the motor speed to meet the demand. By operating at a consistent speed within the required range, VSD compressors minimize energy losses associated with frequent cycling.

    6. Enhanced System Control:

    VSD compressors offer advanced control capabilities, allowing for precise monitoring and adjustment of the compressed air system. These systems can integrate with sensors and control algorithms to maintain optimal system pressure, minimize pressure fluctuations, and prevent excessive energy consumption. The ability to fine-tune the compressor’s output based on real-time demand contributes to improved overall system efficiency.

    By utilizing variable speed drive technology, air compressors can achieve significant energy savings, reduce operational costs, and enhance their environmental sustainability by minimizing energy wastage and optimizing efficiency.

    air compressor

    How are air compressors employed in the mining industry?

    Air compressors play a crucial role in the mining industry, providing reliable and efficient power for various mining operations. Here are some common applications of air compressors in mining:

    1. Exploration and Drilling:

    Air compressors are used during exploration and drilling activities in the mining industry. Compressed air is used to power drilling rigs, pneumatic hammers, and other drilling equipment. The high-pressure air generated by the compressor helps in drilling boreholes, extracting core samples, and exploring potential mineral deposits.

    2. Ventilation and Air Quality Control:

    Air compressors are employed in underground mining to provide ventilation and control air quality. Compressed air is used to operate ventilation fans and air circulation systems, ensuring adequate airflow and removing harmful gases, dust, and fumes from the mining tunnels and work areas.

    3. Material Conveyance:

    In mining operations, air compressors are used for material conveyance. Pneumatic systems powered by air compressors are utilized to transport materials such as coal, ore, and other minerals. Compressed air is used to operate pneumatic conveyors, pumps, and material handling equipment, allowing for efficient and controlled movement of bulk materials.

    4. Dust Suppression:

    Air compressors are employed for dust suppression in mining areas. Compressed air is used to spray water or other suppressants to control dust generated during mining activities. This helps in maintaining a safe and healthy work environment, reducing the risks associated with dust inhalation and improving visibility.

    5. Instrumentation and Control:

    Air compressors are used for instrumentation and control purposes in mining operations. Compressed air is utilized to power pneumatic control systems, control valves, and actuators. These systems regulate the flow of fluids, control equipment movements, and ensure the proper functioning of various mining processes.

    6. Explosive Applications:

    In mining, air compressors are used for explosive applications. Compressed air is employed to power pneumatic tools used for rock fragmentation, such as rock drills and pneumatic breakers. The controlled power of compressed air enables safe and efficient rock breaking without the need for traditional explosives.

    7. Maintenance and Repair:

    Air compressors are essential for maintenance and repair activities in the mining industry. Compressed air is used for cleaning machinery, removing debris, and powering pneumatic tools for equipment maintenance and repair tasks. The versatility and portability of air compressors make them valuable assets in maintaining mining equipment.

    It is important to note that different mining operations may have specific requirements and considerations when selecting and using air compressors. The size, capacity, and features of air compressors can vary based on the specific mining application and environmental conditions.

    By utilizing air compressors effectively, the mining industry can benefit from increased productivity, improved safety, and efficient operation of various mining processes.

    air compressor

    What are the safety considerations when operating an air compressor?

    Operating an air compressor requires careful attention to safety to prevent accidents, injuries, and equipment damage. Here are some important safety considerations to keep in mind:

    1. Read the Manual: Before operating an air compressor, thoroughly read and understand the manufacturer’s instruction manual. Familiarize yourself with the specific safety guidelines, recommended operating procedures, and any specific precautions or warnings provided by the manufacturer.

    2. Proper Ventilation: Ensure that the area where the air compressor is operated has adequate ventilation. Compressed air can produce high levels of heat and exhaust gases. Good ventilation helps dissipate heat, prevent the buildup of fumes, and maintain a safe working environment.

    3. Personal Protective Equipment (PPE): Always wear appropriate personal protective equipment, including safety glasses or goggles, hearing protection, and non-slip footwear. Depending on the task, additional PPE such as gloves, a dust mask, or a face shield may be necessary to protect against specific hazards.

    4. Pressure Relief: Air compressors should be equipped with pressure relief valves or devices to prevent overpressurization. Ensure that these safety features are in place and functioning correctly. Regularly inspect and test the pressure relief mechanism to ensure its effectiveness.

    5. Secure Connections: Use proper fittings, hoses, and couplings to ensure secure connections between the air compressor, air tools, and accessories. Inspect all connections before operation to avoid leaks or sudden hose disconnections, which can cause injuries or damage.

    6. Inspect and Maintain: Regularly inspect the air compressor for any signs of damage, wear, or leaks. Ensure that all components, including hoses, fittings, and safety devices, are in good working condition. Follow the manufacturer’s recommended maintenance schedule to keep the compressor in optimal shape.

    7. Electrical Safety: If the air compressor is electric-powered, take appropriate electrical safety precautions. Use grounded outlets and avoid using extension cords unless approved for the compressor’s power requirements. Protect electrical connections from moisture and avoid operating the compressor in wet or damp environments.

    8. Safe Start-Up and Shut-Down: Properly start and shut down the air compressor following the manufacturer’s instructions. Ensure that all air valves are closed before starting the compressor and release all pressure before performing maintenance or repairs.

    9. Training and Competence: Ensure that operators are adequately trained and competent in using the air compressor and associated tools. Provide training on safe operating procedures, hazard identification, and emergency response protocols.

    10. Emergency Preparedness: Have a clear understanding of emergency procedures and how to respond to potential accidents or malfunctions. Know the location of emergency shut-off valves, fire extinguishers, and first aid kits.

    By adhering to these safety considerations and implementing proper safety practices, the risk of accidents and injuries associated with operating an air compressor can be significantly reduced. Prioritizing safety promotes a secure and productive working environment.

    China wholesaler 380V 50Hz 3phase 7.5kw 10HP Mini Screw Air Compressor in Stock Energy Saving Type VSD Screw Air Compressor 75 Kw VSD Air Compressor Compressor Screw air compressor for saleChina wholesaler 380V 50Hz 3phase 7.5kw 10HP Mini Screw Air Compressor in Stock Energy Saving Type VSD Screw Air Compressor 75 Kw VSD Air Compressor Compressor Screw air compressor for sale
    editor by CX 2023-11-06

    China high quality CHINAMFG 24L Industrial Portable Quiet Air Tank Oiless Air Compressor Manufacturer for Sale best air compressor

    Product Description

    Silent Oil Free Air Compressor
    Model WD065710808 WD065712415 WD065715571
    Power input 600W/0.8HP  1100W/1.5HP 1500W/2.0HP
    Rated voltage  220-240V~50Hz  220-240V~50Hz  220-240V~50Hz
    Rated speed  2800/min  2800/min  2800/min
    Tank volume 8L  24L 50L
    Max.work pressure 7bar(100psi)  8bar(116psi) 8bar(116psi)
    Air flow 50L/min 100L/min 120L/min
    Air-refilled time 15s 22s 35s
    Quantity/Carton 1pc  1pc 1pc
    Net/Gross weight 12.2/13.2Kg  20/21Kg 28/29Kg
    Carton size 420x215x450mm  580x285x585mm  760x345x640mm
    CBM 0.046m3 0.097m3  0.168m3

    Warranty: 1 Year
    Lubrication Style: Oil-free
    Power Source: Electricity
    Type: Piston
    Condition: New, New
    Tank Volume: 24L

    air compressor

    Can air compressors be used for shipbuilding and maritime applications?

    Air compressors are widely used in shipbuilding and maritime applications for a variety of tasks and operations. The maritime industry relies on compressed air for numerous essential functions. Here’s an overview of how air compressors are employed in shipbuilding and maritime applications:

    1. Pneumatic Tools and Equipment:

    Air compressors are extensively used to power pneumatic tools and equipment in shipbuilding and maritime operations. Pneumatic tools such as impact wrenches, drills, grinders, sanders, and chipping hammers require compressed air to function. The versatility and power provided by compressed air make it an ideal energy source for heavy-duty tasks, maintenance, and construction activities in shipyards and onboard vessels.

    2. Painting and Surface Preparation:

    Air compressors play a crucial role in painting and surface preparation during shipbuilding and maintenance. Compressed air is used to power air spray guns, sandblasting equipment, and other surface preparation tools. Compressed air provides the force necessary for efficient and uniform application of paints, coatings, and protective finishes, ensuring the durability and aesthetics of ship surfaces.

    3. Pneumatic Actuation and Controls:

    Air compressors are employed in pneumatic actuation and control systems onboard ships. Compressed air is used to operate pneumatic valves, actuators, and control devices that regulate the flow of fluids, control propulsion systems, and manage various shipboard processes. Pneumatic control systems offer reliability and safety advantages in maritime applications.

    4. Air Start Systems:

    In large marine engines, air compressors are used in air start systems. Compressed air is utilized to initiate the combustion process in the engine cylinders. The compressed air is injected into the cylinders to turn the engine’s crankshaft, enabling the ignition of fuel and starting the engine. Air start systems are commonly found in ship propulsion systems and power generation plants onboard vessels.

    5. Pneumatic Conveying and Material Handling:

    In shipbuilding and maritime operations, compressed air is used for pneumatic conveying and material handling. Compressed air is utilized to transport bulk materials, such as cement, sand, and grain, through pipelines or hoses. Pneumatic conveying systems enable efficient and controlled transfer of materials, facilitating construction, cargo loading, and unloading processes.

    6. Air Conditioning and Ventilation:

    Air compressors are involved in air conditioning and ventilation systems onboard ships. Compressed air powers air conditioning units, ventilation fans, and blowers, ensuring proper air circulation, cooling, and temperature control in various ship compartments, cabins, and machinery spaces. Compressed air-driven systems contribute to the comfort, safety, and operational efficiency of maritime environments.

    These are just a few examples of how air compressors are utilized in shipbuilding and maritime applications. Compressed air’s versatility, reliability, and convenience make it an indispensable energy source for various tasks and systems in the maritime industry.

    air compressor

    Can air compressors be integrated into automated systems?

    Yes, air compressors can be integrated into automated systems, providing a reliable and versatile source of compressed air for various applications. Here’s a detailed explanation of how air compressors can be integrated into automated systems:

    Pneumatic Automation:

    Air compressors are commonly used in pneumatic automation systems, where compressed air is utilized to power and control automated machinery and equipment. Pneumatic systems rely on the controlled release of compressed air to generate linear or rotational motion, actuating valves, cylinders, and other pneumatic components. By integrating an air compressor into the system, a continuous supply of compressed air is available to power the automation process.

    Control and Regulation:

    In automated systems, air compressors are often connected to a control and regulation system to manage the compressed air supply. This system includes components such as pressure regulators, valves, and sensors to monitor and adjust the air pressure, flow, and distribution. The control system ensures that the air compressor operates within the desired parameters and provides the appropriate amount of compressed air to different parts of the automated system as needed.

    Sequential Operations:

    Integration of air compressors into automated systems enables sequential operations to be carried out efficiently. Compressed air can be used to control the timing and sequencing of different pneumatic components, ensuring that the automated system performs tasks in the desired order and with precise timing. This is particularly useful in manufacturing and assembly processes where precise coordination of pneumatic actuators is required.

    Energy Efficiency:

    Air compressors can contribute to energy-efficient automation systems. By incorporating energy-saving features such as Variable Speed Drive (VSD) technology, air compressors can adjust their power output according to the demand, reducing energy consumption during periods of low activity. Additionally, efficient control and regulation systems help optimize the use of compressed air, minimizing waste and improving overall energy efficiency.

    Monitoring and Diagnostics:

    Integration of air compressors into automated systems often includes monitoring and diagnostic capabilities. Sensors and monitoring devices can be installed to collect data on parameters such as air pressure, temperature, and system performance. This information can be used for real-time monitoring, preventive maintenance, and troubleshooting, ensuring the reliable operation of the automated system.

    When integrating air compressors into automated systems, it is crucial to consider factors such as the specific requirements of the automation process, the desired air pressure and volume, and the compatibility of the compressor with the control and regulation system. Consulting with experts in automation and compressed air systems can help in designing an efficient and reliable integration.

    In summary, air compressors can be seamlessly integrated into automated systems, providing the necessary compressed air to power and control pneumatic components, enabling sequential operations, and contributing to energy-efficient automation processes.

    air compressor

    Are there air compressors specifically designed for high-pressure applications?

    Yes, there are air compressors specifically designed for high-pressure applications. These compressors are engineered to generate and deliver compressed air at significantly higher pressures than standard air compressors. Here are some key points about high-pressure air compressors:

    1. Pressure Range: High-pressure air compressors are capable of producing compressed air at pressures typically ranging from 1000 to 5000 psi (pounds per square inch) or even higher. This is considerably higher than the typical range of 100 to 175 psi for standard air compressors.

    2. Construction: High-pressure aircompressors feature robust construction and specialized components to withstand the higher pressures involved. They are designed with reinforced cylinders, pistons, valves, and seals that can handle the increased stress and prevent leaks or failures under high-pressure conditions.

    3. Power: Generating high-pressure compressed air requires more power than standard compressors. High-pressure air compressors often have larger motors or engines to provide the necessary power to achieve the desired pressure levels.

    4. Applications: High-pressure air compressors are utilized in various industries and applications where compressed air at elevated pressures is required. Some common applications include:

    • Industrial manufacturing processes that involve high-pressure air for operations such as air tools, pneumatic machinery, and equipment.
    • Gas and oil exploration and production, where high-pressure air is used for well drilling, well stimulation, and enhanced oil recovery techniques.
    • Scuba diving and underwater operations, where high-pressure air is used for breathing apparatus and underwater tools.
    • Aerospace and aviation industries, where high-pressure air is used for aircraft systems, testing, and pressurization.
    • Fire services and firefighting, where high-pressure air compressors are used to fill breathing air tanks for firefighters.

    5. Safety Considerations: Working with high-pressure air requires adherence to strict safety protocols. Proper training, equipment, and maintenance are crucial to ensure the safe operation of high-pressure air compressors. It is important to follow manufacturer guidelines and industry standards for high-pressure applications.

    When selecting a high-pressure air compressor, consider factors such as the desired pressure range, required flow rate, power source availability, and the specific application requirements. Consult with experts or manufacturers specializing in high-pressure compressed air systems to identify the most suitable compressor for your needs.

    High-pressure air compressors offer the capability to meet the demands of specialized applications that require compressed air at elevated pressures. Their robust design and ability to deliver high-pressure air make them essential tools in various industries and sectors.

    China high quality CHINAMFG 24L Industrial Portable Quiet Air Tank Oiless Air Compressor Manufacturer for Sale best air compressorChina high quality CHINAMFG 24L Industrial Portable Quiet Air Tank Oiless Air Compressor Manufacturer for Sale best air compressor
    editor by CX 2023-11-01

    China Professional 16 Bar 30HP 22kw Four in One Integrated Screw Type Permanent Magnet Frequency Air Compressor for Laser Cutting Other Options Available air compressor for sale

    Product Description

    Product Parameters

    Model Motor Power Maximum Working Pressure Free Air Delivery Air Outlet Pipe Diameter Weight Dimensions(L*W*H)
    kW hp bar(g) psig m³/min cfm kg mm
    BG10APMTD 7.5 10 15.5 225 0.6  21 G1/2″ 440 1800*750*1400
    BG15APMTD 11 15 16 232 0.9  32 G3/4″ 510 1800*750*1550
    BG20APMTD 15 20 16 232 1.2  42 G3/4″ 590 1800*750*1550
    20 290 1.0  35
    BG30APMTD 22 30 16 232 2.2  78 G1″ 690 1800*850*1650
    20 290 2.0  71
    BG50APMTD 37 50 16 232 3.2  113 G1-1/2″ 930 2000*1000*1930
    20 290 2.8  99

    Company Profile

    Wallboge is a high-tech enterprise and is considered 1 of the leading manufacturers of air compressor products in China. Our goal is to provide exceptional customer service coupled with quality products and energy saving solutions.

    Wallboge’ s primary businesses focus in following key areas:

    Integrated screw air compressor for laser cutting
    Permanent magnet variable frequency screw air compressor
    Two-stage compression permanent magnet variable frequency screw air compressor
    Low pressure two-stage compression permanent magnet variable frequency screw air compressor
    Low pressure permanent magnet variable frequency screw air compressor
    Water-lubricated oil-free screw air compressor
    Fixed speed screw air compressor
    Oil-free screw blower
    Screw vacuum pump

    At Wallboge, we earn our customers’ trust and satisfaction by manufacturing the superior quality compressed air products for all industries. All of our products are designed for reliable performance, easy maintenance, and maximum energy efficiency. CHINAMFG has been exporting to more than 150 countries across the globe. 

    Wallboge continuously innovates product development and management to meet customers’ demand. The powerful enterprise culture and continuous innovation make CHINAMFG improved rapidly. Wallboge’ s vision is to be a world-renowned high-end energy-saving machinery brand, with sustainable development, constantly improving its own value and sharing it with our customers and staff, committed to continuously satisfying the needs of global companies by providing a full range of industrial air compression solutions.

    Certifications

    Exhibitions

     

    After Sales Service

    1. 24/7 after sales service in different languages.
    2. Online instruction for installation and commissioning.
    3. On-site instruction for installation and commissioning provided by well-trained engineers or local authorized service center.
    4. CHINAMFG agents and after sales service available.
     

    Our Advantages

    1. Proven product quality.
    2. Factory direct prices.
    3. On-time delivery.
    4. Prompt technical support in different languages before sales, in sales and after sales.
    5. Small orders accepted to check quality first.
    6. OEM & ODM service available.

     

    FAQ

    Q1: Are you a factory or a trading company? 
    A1: We are a factory. Please check our Company Profile.

    Q2: What is the exact address of your factory? 
    A2: No. 588, East Tonggang Road, Shaxi Town, HangZhou City, ZheJiang Province, China

    Q3: What is your delivery time?
    A3: For standard voltage, the delivery time is 15 working days after you confirm the order. For non-standard voltage, please contact our sales to confirm the delivery time.

    Q4: What kind of payment terms do you accept?
    A4: We accept T/T, L/C at sight.

    Q5: How long is the warranty of your air compressor?
    A5: 2 years for the whole air compressor except consumable spare parts.

    Q6: How long could your air compressor be used?
    A6: Generally, more than 10 years.

    Q7: What is your MOQ requirement?
    A7: 1 unit.

    Q8: Can you offer OEM & ODM service?
    A8: Yes, with a professional design team, we can offer OEM & ODM service.

    After-sales Service: Engineers Available to Overseas Service.
    Warranty: 2 Years
    Lubrication Style: Lubricated
    Customization:
    Available

    |

    .shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

    Shipping Cost:

    Estimated freight per unit.





    about shipping cost and estimated delivery time.
    Payment Method:







     

    Initial Payment



    Full Payment
    Currency: US$
    Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

    air compressor

    What is the impact of humidity on compressed air quality?

    Humidity can have a significant impact on the quality of compressed air. Compressed air systems often draw in ambient air, which contains moisture in the form of water vapor. When this air is compressed, the moisture becomes concentrated, leading to potential issues in the compressed air. Here’s an overview of the impact of humidity on compressed air quality:

    1. Corrosion:

    High humidity in compressed air can contribute to corrosion within the compressed air system. The moisture in the air can react with metal surfaces, leading to rust and corrosion in pipes, tanks, valves, and other components. Corrosion not only weakens the structural integrity of the system but also introduces contaminants into the compressed air, compromising its quality and potentially damaging downstream equipment.

    2. Contaminant Carryover:

    Humidity in compressed air can cause carryover of contaminants. Water droplets formed due to condensation can carry particulates, oil, and other impurities present in the air. These contaminants can then be transported along with the compressed air, leading to fouling of filters, clogging of pipelines, and potential damage to pneumatic tools, machinery, and processes.

    3. Decreased Efficiency of Pneumatic Systems:

    Excessive moisture in compressed air can reduce the efficiency of pneumatic systems. Water droplets can obstruct or block the flow of air, leading to decreased performance of pneumatic tools and equipment. Moisture can also cause problems in control valves, actuators, and other pneumatic devices, affecting their responsiveness and accuracy.

    4. Product Contamination:

    In industries where compressed air comes into direct contact with products or processes, high humidity can result in product contamination. Moisture in compressed air can mix with sensitive products, leading to quality issues, spoilage, or even health hazards in industries such as food and beverage, pharmaceuticals, and electronics manufacturing.

    5. Increased Maintenance Requirements:

    Humidity in compressed air can increase the maintenance requirements of a compressed air system. Moisture can accumulate in filters, separators, and other air treatment components, necessitating frequent replacement or cleaning. Excessive moisture can also lead to the growth of bacteria, fungus, and mold within the system, requiring additional cleaning and maintenance efforts.

    6. Adverse Effects on Instrumentation:

    Humidity can adversely affect instrumentation and control systems that rely on compressed air. Moisture can disrupt the accuracy and reliability of pressure sensors, flow meters, and other pneumatic instruments, leading to incorrect measurements and control signals.

    To mitigate the impact of humidity on compressed air quality, various air treatment equipment is employed, including air dryers, moisture separators, and filters. These devices help remove moisture from the compressed air, ensuring that the air supplied is dry and of high quality for the intended applications.

    air compressor

    What is the role of air compressors in manufacturing and industrial processes?

    Air compressors play a crucial role in various manufacturing and industrial processes, providing a reliable source of compressed air that powers a wide range of equipment and tools. Here are some key roles of air compressors in manufacturing and industrial settings:

    1. Pneumatic Tools and Equipment:

    Air compressors power a wide range of pneumatic tools and equipment used in manufacturing processes. These tools include impact wrenches, air drills, sanders, grinders, nail guns, and spray guns. Compressed air provides the necessary force and energy for these tools, enabling efficient and precise operations.

    2. Automation and Control Systems:

    Compressed air is used in automation and control systems within manufacturing facilities. Pneumatic actuators and valves use compressed air to control the movement of machinery and components. These systems are widely used in assembly lines, packaging operations, and material handling processes.

    3. Air Blowing and Cleaning:

    Compressed air is employed for blowing and cleaning applications in manufacturing and industrial processes. Air blowguns and air nozzles are used to remove debris, dust, and contaminants from surfaces, machinery, and products. Compressed air is also used for drying, cooling, and purging operations.

    4. Air Separation and Gas Generation:

    Air compressors are used in air separation plants to generate industrial gases such as nitrogen, oxygen, and argon. These gases are essential for various industrial processes, including metal fabrication, chemical production, and food packaging.

    5. HVAC Systems:

    Compressed air is utilized in heating, ventilation, and air conditioning (HVAC) systems. It powers pneumatic actuators for damper control, pneumatic controls for pressure regulation, and pneumatic valves for flow control in HVAC applications.

    6. Air Compression for Storage and Transport:

    Compressed air is used for storage and transport purposes in manufacturing and industrial settings. It is often used to pressurize storage tanks or containers that hold gases or liquids. Compressed air also facilitates the transfer of materials through pipelines and pneumatic conveying systems.

    7. Process Instrumentation:

    Compressed air is utilized in process instrumentation and control systems. It powers pneumatic instruments such as pressure gauges, flow meters, and control valves. These instruments play a critical role in monitoring and regulating various parameters in industrial processes.

    8. Material Handling and Pneumatic Conveying:

    In manufacturing and industrial facilities, compressed air is used for material handling and pneumatic conveying systems. It enables the movement of bulk materials such as powders, granules, and pellets through pipelines, facilitating efficient and controlled material transfer.

    Overall, air compressors are vital components in manufacturing and industrial processes, providing a versatile and efficient source of power for a wide range of applications. The specific role of air compressors may vary depending on the industry, process requirements, and operational needs.

    air compressor

    Are there portable air compressors available for home use?

    Yes, there are portable air compressors specifically designed for home use. These portable models offer convenience, versatility, and ease of use for various tasks around the house. Here are some key points about portable air compressors for home use:

    1. Compact and Lightweight: Portable air compressors are typically compact and lightweight, making them easy to transport and store. They are designed with portability in mind, allowing homeowners to move them around the house or take them to different locations as needed.

    2. Electric-Powered: Most portable air compressors for home use are electric-powered. They can be plugged into a standard household electrical outlet, eliminating the need for gasoline or other fuel sources. This makes them suitable for indoor use without concerns about emissions or ventilation.

    3. Versatile Applications: Portable air compressors can be used for a wide range of home applications. They are commonly used for inflating tires, sports equipment, and inflatable toys. They are also handy for operating pneumatic tools such as nail guns, staplers, and paint sprayers. Additionally, portable air compressors can be used for cleaning tasks, powering airbrushes, and other light-duty tasks around the house.

    4. Pressure and Capacity: Portable air compressors for home use typically have lower pressure and capacity ratings compared to larger industrial or commercial models. They are designed to meet the needs of common household tasks rather than heavy-duty applications. The pressure and capacity of these compressors are usually sufficient for most home users.

    5. Oil-Free Operation: Many portable air compressors for home use feature oil-free operation. This means they do not require regular oil changes or maintenance, making them more user-friendly and hassle-free for homeowners.

    6. Noise Level: Portable air compressors designed for home use often prioritize low noise levels. They are engineered to operate quietly, reducing noise disturbances in residential environments.

    7. Cost: Portable air compressors for home use are generally more affordable compared to larger, industrial-grade compressors. They offer a cost-effective solution for homeowners who require occasional or light-duty compressed air applications.

    When considering a portable air compressor for home use, it’s important to assess your specific needs and tasks. Determine the required pressure, capacity, and features that align with your intended applications. Additionally, consider factors such as portability, noise level, and budget to choose a suitable model that meets your requirements.

    Overall, portable air compressors provide a practical and accessible compressed air solution for homeowners, allowing them to tackle a variety of tasks efficiently and conveniently within a home setting.

    China Professional 16 Bar 30HP 22kw Four in One Integrated Screw Type Permanent Magnet Frequency Air Compressor for Laser Cutting Other Options Available air compressor for saleChina Professional 16 Bar 30HP 22kw Four in One Integrated Screw Type Permanent Magnet Frequency Air Compressor for Laser Cutting Other Options Available air compressor for sale
    editor by CX 2023-10-30

    China Best Sales Laser Cutting of High Pressure Screw Air Compressor with Tank, Dryer, Cooler, Filter, 37kw 50HP 20bar air compressor for sale

    Product Description

    Product Description

    Detailed Photos

    Product Parameters

    Model KAPM-50A-20
    Power(KW) 37KW
    Pressure(bar) 20
    Volume(m³/min) 3.2
    Pipe Diameter G1/2
    Weight(kg) 930
    Dimension(mm) 1990*980*1970(combined type)

     

    Certifications

    Packaging & Shipping

    Installation Instructions

    Company Profile

        ZheJiang Kingair Industrial Co., Ltd., is the core technology solution provider for compressed gas system solutions, with mature operation experience and excellent brand reputation in the 3 major areas : product system, core technology and solutions.

        The company has strong comprehensive strength, the factory is located in Xihu (West Lake) Dis., ZheJiang , covers an area of 30000 square meters, has a strong equipment production capacity. In the course of 20 years of operation and development, we have always adhered to the enterprise spirit of
    “professionalism, innovation, energy saving and service”, deeply implemented the strategic policy of environmental protection and low carbon, and realized the construction of high intelligent and efficient air pressure system industry chain.

        Kingair focuses on R&D, production and trade, and produces air compressor products with stable overall performance, advanced control system, superior, gas environment, reasonable design, higher efficiency and longer service life.

        Eachproduct of the company has passed the IS09000 quality management system certification, European CE, ISO certification, etc., and has established a complete set of mature foreign trade operation system. The products are popular in more than 80 countries and regions in Asia, Europe,Africa and America.

    FAQ

    Q1. Is KINGAIR trading company or manufacture ?
    A: We are professional manufacturer of screw air compressor, more than 20years experience.

    Q2. How long is KINGAIR delivery time ?
    A: KINGAIR standard delivery time is 15working days After confirmed order.For the other non-standard requirements will be discussed case by case.

    Q3. How about your after-sales service?
    A: 1. Provide customers with installation and commissioning online instructions.
    2. Well-trained engineers available to overseas service.
    3. CHINAMFG agents and after service available.arrange our engineers to help you training and installation.

    Q4. What is the available voltage KINGAIR compressor?
    A:KINGAIR available voltage include
    380v/50hz/3p,4000v/50hz/3p,3415v/50hz/3p,220v/60hz/3p,440v/60hz/3p,And
    KIGNAIR also supplies the required Voltage.

    Q5. Do you have any certificate ?
    A: Yes, according to customer’s market need, we can offer CE, ISO etc certificate.

    Q6. Do you offer OEM service ?
    A: Yes Both OEM & ODM service can be accepted.

    Q7. Can KINGAIR machines be run in High Temperature environment?What is working temperature range?
    A: Yes, KINGAIR machines would run in high temperature environment countries.such as India, UAE,South Africa, Saudi Arabia, Iraq. Pakistan.etc.
    Q1. Is KINGAIR trading company or manufacture ?
    A: We are professional manufacturer of screw air compressor, more than 20years experience.

    Q2. How long is KINGAIR delivery time ?
    A: KINGAIR standard delivery time is 15working days After confirmed order.For the other non-standard requirements will be discussed case by case.

    Q3. How about your after-sales service?
    A: 1. Provide customers with installation and commissioning online instructions.
    2. Well-trained engineers available to overseas service.
    3. CHINAMFG agents and after service available.arrange our engineers to help you training and installation.

    Q4. What is the available voltage KINGAIR compressor?
    A:KINGAIR available voltage include
    380v/50hz/3p,4000v/50hz/3p,3415v/50hz/3p,220v/60hz/3p,440v/60hz/3p,And
    KIGNAIR also supplies the required Voltage.

    Q5. Do you have any certificate ?
    A: Yes, according to customer’s market need, we can offer CE, ISO etc certificate.

    Q6. Do you offer OEM service ?
    A: Yes Both OEM & ODM service can be accepted.

    Q7. Can KINGAIR machines be run in High Temperature environment?What is working temperature range?
    A: Yes, KINGAIR machines would run in high temperature environment countries.such as India, UAE,South Africa, Saudi Arabia, Iraq. Pakistan.etc.
     

     

     

     

     

    After-sales Service: Online Technology Support
    Warranty: 12months
    Lubrication Style: Lubricated
    Cooling System: Air Cooling
    Power Source: AC Power
    Cylinder Position: Horizontal
    Samples:
    US$ 5000/Piece
    1 Piece(Min.Order)

    |
    Request Sample

    Customization:
    Available

    |

    air compressor

    Are there special considerations for air compressor installations in remote areas?

    Yes, there are several special considerations to take into account when installing air compressors in remote areas. These areas often lack access to infrastructure and services readily available in urban or well-developed regions. Here are some key considerations:

    1. Power Source:

    Remote areas may have limited or unreliable access to electricity. It is crucial to assess the availability and reliability of the power source for operating the air compressor. In some cases, alternative power sources such as diesel generators or solar panels may need to be considered to ensure a consistent and uninterrupted power supply.

    2. Environmental Conditions:

    Remote areas can present harsh environmental conditions that can impact the performance and durability of air compressors. Extreme temperatures, high humidity, dust, and corrosive environments may require the selection of air compressors specifically designed to withstand these conditions. Adequate protection, insulation, and ventilation must be considered to prevent damage and ensure optimal operation.

    3. Accessibility and Transport:

    Transporting air compressors to remote areas may pose logistical challenges. The size, weight, and portability of the equipment should be evaluated to ensure it can be transported efficiently to the installation site. Additionally, the availability of suitable transportation infrastructure, such as roads or air transportation, needs to be considered to facilitate the delivery and installation process.

    4. Maintenance and Service:

    In remote areas, access to maintenance and service providers may be limited. It is important to consider the availability of trained technicians and spare parts for the specific air compressor model. Adequate planning for routine maintenance, repairs, and troubleshooting should be in place to minimize downtime and ensure the longevity of the equipment.

    5. Fuel and Lubricants:

    For air compressors that require fuel or lubricants, ensuring a consistent and reliable supply can be challenging in remote areas. It is necessary to assess the availability and accessibility of fuel or lubricant sources and plan for their storage and replenishment. In some cases, alternative or renewable fuel options may need to be considered.

    6. Noise and Environmental Impact:

    Remote areas are often characterized by their natural beauty and tranquility. Minimizing noise levels and environmental impact should be a consideration when installing air compressors. Selecting models with low noise emissions and implementing appropriate noise reduction measures can help mitigate disturbances to the surrounding environment and wildlife.

    7. Communication and Remote Monitoring:

    Given the remote location, establishing reliable communication channels and remote monitoring capabilities can be essential for effective operation and maintenance. Remote monitoring systems can provide real-time data on the performance and status of the air compressor, enabling proactive maintenance and troubleshooting.

    By addressing these special considerations, air compressor installations in remote areas can be optimized for reliable operation, efficiency, and longevity.

    air compressor

    What is the role of air compressors in manufacturing and industrial processes?

    Air compressors play a crucial role in various manufacturing and industrial processes, providing a reliable source of compressed air that powers a wide range of equipment and tools. Here are some key roles of air compressors in manufacturing and industrial settings:

    1. Pneumatic Tools and Equipment:

    Air compressors power a wide range of pneumatic tools and equipment used in manufacturing processes. These tools include impact wrenches, air drills, sanders, grinders, nail guns, and spray guns. Compressed air provides the necessary force and energy for these tools, enabling efficient and precise operations.

    2. Automation and Control Systems:

    Compressed air is used in automation and control systems within manufacturing facilities. Pneumatic actuators and valves use compressed air to control the movement of machinery and components. These systems are widely used in assembly lines, packaging operations, and material handling processes.

    3. Air Blowing and Cleaning:

    Compressed air is employed for blowing and cleaning applications in manufacturing and industrial processes. Air blowguns and air nozzles are used to remove debris, dust, and contaminants from surfaces, machinery, and products. Compressed air is also used for drying, cooling, and purging operations.

    4. Air Separation and Gas Generation:

    Air compressors are used in air separation plants to generate industrial gases such as nitrogen, oxygen, and argon. These gases are essential for various industrial processes, including metal fabrication, chemical production, and food packaging.

    5. HVAC Systems:

    Compressed air is utilized in heating, ventilation, and air conditioning (HVAC) systems. It powers pneumatic actuators for damper control, pneumatic controls for pressure regulation, and pneumatic valves for flow control in HVAC applications.

    6. Air Compression for Storage and Transport:

    Compressed air is used for storage and transport purposes in manufacturing and industrial settings. It is often used to pressurize storage tanks or containers that hold gases or liquids. Compressed air also facilitates the transfer of materials through pipelines and pneumatic conveying systems.

    7. Process Instrumentation:

    Compressed air is utilized in process instrumentation and control systems. It powers pneumatic instruments such as pressure gauges, flow meters, and control valves. These instruments play a critical role in monitoring and regulating various parameters in industrial processes.

    8. Material Handling and Pneumatic Conveying:

    In manufacturing and industrial facilities, compressed air is used for material handling and pneumatic conveying systems. It enables the movement of bulk materials such as powders, granules, and pellets through pipelines, facilitating efficient and controlled material transfer.

    Overall, air compressors are vital components in manufacturing and industrial processes, providing a versatile and efficient source of power for a wide range of applications. The specific role of air compressors may vary depending on the industry, process requirements, and operational needs.

    air compressor

    How do you choose the right size of air compressor for your needs?

    Choosing the right size of air compressor is essential to ensure optimal performance and efficiency for your specific needs. Here are some factors to consider when selecting the appropriate size:

    1. Air Demand: Determine the air demand requirements of your applications. Calculate the total CFM (Cubic Feet per Minute) needed by considering the air consumption of all the pneumatic tools and equipment that will be operated simultaneously. Choose an air compressor with a CFM rating that meets or exceeds this total demand.

    2. Pressure Requirements: Consider the required operating pressure for your applications. Check the PSI (Pounds per Square Inch) rating of the tools and equipment you will be using. Ensure that the air compressor you choose can deliver the necessary pressure consistently.

    3. Duty Cycle: Evaluate the duty cycle of the air compressor. The duty cycle represents the percentage of time the compressor can operate within a given time period without overheating or experiencing performance issues. If you require continuous or heavy-duty operation, choose a compressor with a higher duty cycle.

    4. Power Source: Determine the available power source at your location. Air compressors can be powered by electricity or gasoline engines. Ensure that the chosen compressor matches the available power supply and consider factors such as voltage, phase, and fuel requirements.

    5. Portability: Assess the portability requirements of your applications. If you need to move the air compressor frequently or use it in different locations, consider a portable or wheeled compressor that is easy to transport.

    6. Space and Noise Constraints: Consider the available space for installation and the noise restrictions in your working environment. Choose an air compressor that fits within the allocated space and meets any noise regulations or requirements.

    7. Future Expansion: Anticipate any potential future expansions or increases in air demand. If you expect your air demand to grow over time, it may be wise to choose a slightly larger compressor to accommodate future needs and avoid the need for premature replacement.

    8. Budget: Consider your budgetary constraints. Compare the prices of different air compressor models while ensuring that the chosen compressor meets your specific requirements. Keep in mind that investing in a higher-quality compressor may result in better performance, durability, and long-term cost savings.

    By considering these factors and evaluating your specific needs, you can choose the right size of air compressor that will meet your air demand, pressure requirements, and operational preferences, ultimately ensuring efficient and reliable performance.

    China Best Sales Laser Cutting of High Pressure Screw Air Compressor with Tank, Dryer, Cooler, Filter, 37kw 50HP 20bar air compressor for saleChina Best Sales Laser Cutting of High Pressure Screw Air Compressor with Tank, Dryer, Cooler, Filter, 37kw 50HP 20bar air compressor for sale
    editor by CX 2023-10-27

    China Best Sales Cheap 35 Cfm 7.5kw 10HP Energy Saving VSD Industrial Rotary Air Compressor with Dryer for Sale 10 HP Air Compressor Single Phase mini air compressor

    Product Description

    Cheap 35 CFM 7.5KW 10HP Energy Saving VSD Industrial Rotary Air Compressor With Dryer For Sale 10 HP Air Compressor Single Phase

     

    Product Name :  Cheap 35 CFM 7.5KW 10HP Energy Saving VSD Industrial Rotary Air Compressor With Dryer For Sale 10 HP Air Compressor Single Phase
    Type:  Oil Injected Permanent Magnetic Variable Speed Rotary Screw Air Compressor
    Voltage:  380V/50HZ/3P, 220V/60HZ/3P, 400V/50HZ/3P, 415V/50HZ/3P or Customer′s Requirements
    Working Pressure:  low pressure: 6bar, 7 bar, 8bar, 10 bar, 12bar, 13bar;
    Motor Power:  7.5KW, 11 Kw, 15KW, 18.5KW, 22KW, 30KW, 37KW, 45KW to 250KW
    Horse Power:  10HP, 15 HP, 20HP, 25HP, 30HP to 350HP
    Driven Method: Direct Driven
    Air End:  Hanbell brand air end
    Trademark:  Lingyu
    Transport Package:  Standard Wooden Packing
    Available Certificate:  CE, ISO, SGS
    Origin:  ZheJiang , China
    Application: Many industrial: Packing,Painting,Precision Electroplating,Peparing

    Q: Are you a factory or a trading company?
    A: We are factory. And we have ourselves trading company.

    Q: What is the specific address of your company?
    A: No.3, 2nd Street, yuanle Road, Xihu (West Lake) Dis.sheng Town, HangZhou City, ZheJiang Province, China

    Q: Do your company accept ODM & OEM?
    A: Yes, of course. We accept full ODM & OEM.

    Q: What about the voltage of products? Can they be customized?
    A: Yes, of course. The voltage can be customized according to your requirement.

    Q: Do your company offer spare parts of the machines?
    A: Yes, of course, high quality spare parts are available in our factory.

    Q: What are your payment terms?
    A: 50% T/T in advance, 50% T/T before delivery.

    Q: What payment ways do you accept?
    A: T/T, Western Union

    Q: How long will you take to arrange the goods?
    A: For normal voltages,we can delivery the goods within 7-15 days. For other electricity or other customized machines, we
    will delivery within 25-30 days.

     

    Cheap 35 CFM 7.5KW 10HP Energy Saving VSD Industrial Rotary Air Compressor With Dryer For Sale 10 HP Air Compressor Single Phase

    After-sales Service: Video Support
    Warranty: 2 Year Warranty
    Lubrication Style: Lubricated
    Cooling System: Air Cooling
    Power Source: AC Power
    Structure Type: Closed Type
    Samples:
    US$ 2999/Piece
    1 Piece(Min.Order)

    |
    Request Sample

    Customization:
    Available

    |

    air compressor

    How are air compressors utilized in the aerospace industry?

    Air compressors play a crucial role in various applications within the aerospace industry. They are utilized for a wide range of tasks that require compressed air or gas. Here are some key uses of air compressors in the aerospace industry:

    1. Aircraft Systems:

    Air compressors are used in aircraft systems to provide compressed air for various functions. They supply compressed air for pneumatic systems, such as landing gear operation, braking systems, wing flap control, and flight control surfaces. Compressed air is also utilized for starting aircraft engines and for cabin pressurization and air conditioning systems.

    2. Ground Support Equipment:

    Air compressors are employed in ground support equipment used in the aerospace industry. They provide compressed air for tasks such as inflating aircraft tires, operating pneumatic tools for maintenance and repair, and powering air-driven systems for fueling, lubrication, and hydraulic operations.

    3. Component Testing:

    Air compressors are utilized in component testing within the aerospace industry. They supply compressed air for testing and calibrating various aircraft components, such as valves, actuators, pressure sensors, pneumatic switches, and control systems. Compressed air is used to simulate operating conditions and evaluate the performance and reliability of these components.

    4. Airborne Systems:

    In certain aircraft, air compressors are employed for specific airborne systems. For example, in military aircraft, air compressors are used for air-to-air refueling systems, where compressed air is utilized to transfer fuel between aircraft in mid-air. Compressed air is also employed in aircraft de-icing systems, where it is used to inflate inflatable de-icing boots on the wing surfaces to remove ice accumulation during flight.

    5. Environmental Control Systems:

    Air compressors play a critical role in the environmental control systems of aircraft. They supply compressed air for air conditioning, ventilation, and pressurization systems, ensuring a comfortable and controlled environment inside the aircraft cabin. Compressed air is used to cool and circulate air, maintain desired cabin pressure, and control humidity levels.

    6. Engine Testing:

    In the aerospace industry, air compressors are utilized for engine testing purposes. They provide compressed air for engine test cells, where aircraft engines are tested for performance, efficiency, and durability. Compressed air is used to simulate different operating conditions and loads on the engine, allowing engineers to assess its performance and make necessary adjustments or improvements.

    7. Oxygen Systems:

    In aircraft, air compressors are involved in the production of medical-grade oxygen for onboard oxygen systems. Compressed air is passed through molecular sieve beds or other oxygen concentrator systems to separate oxygen from other components of air. The generated oxygen is then supplied to the onboard oxygen systems, ensuring a sufficient and continuous supply of breathable oxygen for passengers and crew at high altitudes.

    It is important to note that air compressors used in the aerospace industry must meet stringent quality and safety standards. They need to be reliable, efficient, and capable of operating under demanding conditions to ensure the safety and performance of aircraft systems.

    air compressor

    What are the environmental considerations when using air compressors?

    When using air compressors, there are several environmental considerations to keep in mind. Here’s an in-depth look at some of the key factors:

    Energy Efficiency:

    Energy efficiency is a crucial environmental consideration when using air compressors. Compressing air requires a significant amount of energy, and inefficient compressors can consume excessive power, leading to higher energy consumption and increased greenhouse gas emissions. It is important to choose energy-efficient air compressors that incorporate features such as Variable Speed Drive (VSD) technology and efficient motor design, as they can help minimize energy waste and reduce the carbon footprint.

    Air Leakage:

    Air leakage is a common issue in compressed air systems and can contribute to energy waste and environmental impact. Leaks in the system result in the continuous release of compressed air, requiring the compressor to work harder and consume more energy to maintain the desired pressure. Regular inspection and maintenance of the compressed air system to detect and repair leaks can help reduce air loss and improve overall energy efficiency.

    Noise Pollution:

    Air compressors can generate significant noise levels during operation, which can contribute to noise pollution. Prolonged exposure to high noise levels can have detrimental effects on human health and well-being and can also impact the surrounding environment and wildlife. It is important to consider noise reduction measures such as sound insulation, proper equipment placement, and using quieter compressor models to mitigate the impact of noise pollution.

    Emissions:

    While air compressors do not directly emit pollutants, the electricity or fuel used to power them can have an environmental impact. If the electricity is generated from fossil fuels, the associated emissions from power plants contribute to air pollution and greenhouse gas emissions. Choosing energy sources with lower emissions, such as renewable energy, can help reduce the environmental impact of operating air compressors.

    Proper Waste Management:

    Proper waste management is essential when using air compressors. This includes the appropriate disposal of compressor lubricants, filters, and other maintenance-related materials. It is important to follow local regulations and guidelines for waste disposal to prevent contamination of soil, water, or air and minimize the environmental impact.

    Sustainable Practices:

    Adopting sustainable practices can further reduce the environmental impact of using air compressors. This can include implementing preventive maintenance programs to optimize performance, reducing idle time, and promoting responsible use of compressed air by avoiding overpressurization and optimizing system design.

    By considering these environmental factors and taking appropriate measures, it is possible to minimize the environmental impact associated with the use of air compressors. Choosing energy-efficient models, addressing air leaks, managing waste properly, and adopting sustainable practices can contribute to a more environmentally friendly operation.

    air compressor

    Can air compressors be used for automotive applications?

    Yes, air compressors can be used for various automotive applications and are commonly found in automotive repair shops, garages, and even in some vehicles. Here are some automotive applications where air compressors are frequently utilized:

    1. Tire Inflation: Air compressors are commonly used to inflate tires in automotive applications. They provide a convenient and efficient way to inflate tires to the recommended pressure, ensuring optimal tire performance, fuel efficiency, and safety.

    2. Air Tools: Air compressors power a wide range of pneumatic tools used in automotive repair and maintenance. These tools include impact wrenches, ratchet wrenches, air hammers, pneumatic drills, and sanders. Air-powered tools are favored for their high torque and power-to-weight ratio, making them suitable for heavy-duty automotive tasks.

    3. Spray Painting: Air compressors are commonly used in automotive painting applications. They power airbrushes and spray guns that are used to apply paint, primer, and clear coats. Air compressors provide the necessary air pressure to atomize the paint and deliver a smooth and even finish.

    4. Brake System Maintenance: Air compressors play a crucial role in maintaining and diagnosing automotive brake systems. They are used to pressurize the brake lines, allowing for proper bleeding of the system and detection of leaks or faults.

    5. Suspension Systems: Some automotive suspension systems, such as air suspensions, rely on air compressors to maintain the desired air pressure in the suspension components. The compressor inflates or deflates the suspension as needed to provide a comfortable ride and optimal handling.

    6. Cleaning and Dusting: Air compressors are used for cleaning automotive parts, blowing away dust and debris, and drying surfaces. They provide a high-pressure stream of air that effectively cleans hard-to-reach areas.

    7. Air Conditioning Systems: Air compressors are a key component in automotive air conditioning systems. They compress and circulate refrigerant, allowing the system to cool and dehumidify the air inside the vehicle.

    When using air compressors for automotive applications, it’s important to consider the specific requirements of the task at hand. Ensure that the air compressor has the necessary pressure and capacity to meet the demands of the application. Additionally, use appropriate air hoses, fittings, and tools that are compatible with the compressor’s output.

    Overall, air compressors are versatile and valuable tools in the automotive industry, providing efficient power sources for a wide range of applications, from tire inflation to powering pneumatic tools and supporting various automotive systems.

    China Best Sales Cheap 35 Cfm 7.5kw 10HP Energy Saving VSD Industrial Rotary Air Compressor with Dryer for Sale 10 HP Air Compressor Single Phase mini air compressorChina Best Sales Cheap 35 Cfm 7.5kw 10HP Energy Saving VSD Industrial Rotary Air Compressor with Dryer for Sale 10 HP Air Compressor Single Phase mini air compressor
    editor by CX 2023-10-18